- A
Scope is defined at the beginning of the project
Predictive life cycles require detailed scope definition early.
- B
Changes are welcomed and incorporated at any time
Why wrong: Predictive life cycles discourage changes; they are managed through change control.
- C
Requirements are gathered incrementally throughout the project
Why wrong: This is typical of adaptive life cycles.
- D
Deliverables are developed through multiple iterations
Why wrong: Iterative development is characteristic of adaptive or iterative life cycles.
- E
Detailed planning is performed for the entire project
Predictive life cycles involve comprehensive upfront planning.
Quick Answer
The correct answer is that detailed planning is performed for the entire project, as this is a defining characteristic of a predictive life cycle. In this approach, the project scope, schedule, and cost are fully defined and baselined before execution begins, allowing the team to create a comprehensive project management plan that guides all subsequent work. This upfront planning is possible because requirements are well understood and unlikely to change, contrasting sharply with adaptive life cycles where planning is iterative. On the CAPM exam, this concept tests your understanding of the PMBOK Guide’s life cycle classifications, and a common trap is confusing predictive life cycles with iterative or incremental models—remember that predictive means “plan first, execute once.” A helpful memory tip is to think of a blueprint for a house: you finalize every detail before breaking ground, just as in a predictive life cycle you finalize the plan before any work begins.
CAPM Predictive Plan-Based Methodologies Practice Question
This CAPM practice question tests your understanding of predictive plan-based methodologies. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which TWO of the following are characteristics of a predictive life cycle?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Scope is defined at the beginning of the project
Option A is correct because in a predictive life cycle, the project scope is defined and baselined at the start, before execution begins. This upfront planning ensures that all requirements are known and documented, allowing for a detailed project management plan to guide the entire project.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Scope is defined at the beginning of the project
Why this is correct
Predictive life cycles require detailed scope definition early.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Changes are welcomed and incorporated at any time
Why it's wrong here
Predictive life cycles discourage changes; they are managed through change control.
- ✗
Requirements are gathered incrementally throughout the project
Why it's wrong here
This is typical of adaptive life cycles.
- ✗
Deliverables are developed through multiple iterations
Why it's wrong here
Iterative development is characteristic of adaptive or iterative life cycles.
- ✓
Detailed planning is performed for the entire project
Why this is correct
Predictive life cycles involve comprehensive upfront planning.
Related concept
Read the scenario before looking for a memorised answer.
Common exam traps
Common exam trap: answer the scenario, not the keyword
PMI often tests the confusion between predictive and iterative life cycles, where candidates mistakenly think that incremental requirements gathering or iterative delivery can occur in a predictive model, but the key distinction is that predictive life cycles perform all planning upfront and deliver the product in a single final release.
Detailed technical explanation
How to think about this question
In a predictive life cycle, the Work Breakdown Structure (WBS) is created from the fully defined scope, and the project schedule is built using techniques like Critical Path Method (CPM) with deterministic durations. This approach relies on the assumption that the project environment is stable and requirements are well-understood, making it suitable for industries like construction or manufacturing where changes are costly.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the CAPM exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Predictive Plan-Based Methodologies — study guide chapter
Learn the concepts, then practise the questions
- →
Predictive Plan-Based Methodologies practice questions
Targeted practice on this topic area only
- →
All CAPM questions
503 questions across all exam domains
- →
Certified Associate in Project Management CAPM study guide
Full concept coverage aligned to exam objectives
- →
CAPM practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related CAPM practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Agile Frameworks and Methodologies practice questions
Practise CAPM questions linked to Agile Frameworks and Methodologies.
Project Management Fundamentals and Core Concepts practice questions
Practise CAPM questions linked to Project Management Fundamentals and Core Concepts.
Predictive Plan-Based Methodologies practice questions
Practise CAPM questions linked to Predictive Plan-Based Methodologies.
Business Analysis Frameworks practice questions
Practise CAPM questions linked to Business Analysis Frameworks.
CAPM fundamentals practice questions
Practise CAPM questions linked to CAPM fundamentals.
CAPM scenario practice questions
Practise CAPM questions linked to CAPM scenario.
CAPM troubleshooting practice questions
Practise CAPM questions linked to CAPM troubleshooting.
Practice this exam
Start a free CAPM practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this CAPM question test?
Predictive Plan-Based Methodologies — This question tests Predictive Plan-Based Methodologies — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Scope is defined at the beginning of the project — Option A is correct because in a predictive life cycle, the project scope is defined and baselined at the start, before execution begins. This upfront planning ensures that all requirements are known and documented, allowing for a detailed project management plan to guide the entire project.
What should I do if I get this CAPM question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More CAPM practice questions
- Which THREE factors should a business analyst consider when selecting an elicitation technique for a project?
- Drag and drop the steps for conducting a procurement process in the correct order.
- Drag and drop the steps for controlling project changes according to the integrated change control process.
- Drag and drop the steps for managing project quality in the correct order.
- Drag and drop the steps for closing a project phase or project in the correct order.
- Drag and drop the steps for managing project communications in the correct order.
Last reviewed: Jun 30, 2026
This CAPM practice question is part of Courseiva's free PMI certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the CAPM exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.