- A
Set up location profiles to mark the secure area as 'Restricted' and configure location directives to use these locations for high-value items. Enable production reservation in the production order defaults.
Why wrong: Location profiles do not restrict worker access.
- B
Assign batch attributes to high-value materials and use batch reservation. Restrict picking by setting up a separate warehouse for high-value items.
Why wrong: Batch attributes are for batch management, not worker restriction.
- C
Use inventory status to block high-value items and create a quality order to release them. Enable automatic reservation in master planning parameters.
Why wrong: Inventory status blocks all users, not specific workers.
- D
Configure production reservation in the production control parameters to reserve materials automatically when production orders are firm planned. Create a new warehouse location for high-value items, and set up a mobile device menu item with a worker filter to restrict picking to authorized workers.
Automates reservation and restricts picking via worker filter.
Quick Answer
The answer is to configure production reservation in the production control parameters for automatic material reservation and create a secure warehouse location with a worker-filtered mobile device menu item. This works because the production reservation setting ensures that when production orders are firm planned, the system automatically reserves raw materials from available stock, preventing the delays caused by unallocated inventory. Meanwhile, restricting high-value items requires a dedicated warehouse location within Warehouse A, combined with a mobile device menu item that uses a worker filter to limit picking to authorized personnel—location profiles or inventory status blocks cannot achieve this per-worker control. On the MB-920 exam, this scenario tests your understanding of production order lifecycle and warehouse configuration, often appearing as a multi-step configuration question where the trap is confusing location directives with worker filters. Remember the pairing: “Firm planned orders need automatic reservation; secure stock needs a location plus a worker filter.”
MB-920 Describe Dynamics 365 Supply Chain Management Practice Question
This MB-920 practice question tests your understanding of describe dynamics 365 supply chain management. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
You are a supply chain consultant for a mid-sized manufacturing company that uses Dynamics 365 Supply Chain Management. The company produces electronic components and has two warehouses: one for raw materials (Warehouse A) and one for finished goods (Warehouse B). They have been experiencing frequent delays in production because raw materials are not available when needed, even though the materials are in stock at Warehouse A. The production scheduler reports that the system does not automatically reserve materials for production orders. Additionally, the warehouse manager wants to implement a policy where high-value raw materials are stored in a secure, locked area within Warehouse A, and only authorized workers can pick them. You need to configure the system to: (1) automatically reserve raw materials for production orders when they are firm planned; (2) restrict picking of high-value materials to specific workers. What should you do?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Configure production reservation in the production control parameters to reserve materials automatically when production orders are firm planned. Create a new warehouse location for high-value items, and set up a mobile device menu item with a worker filter to restrict picking to authorized workers.
To automatically reserve materials, configure production reservation (option C). To restrict picking, set up location directives with a specific warehouse location for high-value items and create a mobile device menu item that requires a worker filter. Option C is correct. Option A uses location profiles which do not restrict workers. Option B uses inventory status which blocks entire stock but not per worker. Option D uses batch attributes which are for batch-controlled items.
Key principle: OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Set up location profiles to mark the secure area as 'Restricted' and configure location directives to use these locations for high-value items. Enable production reservation in the production order defaults.
Why it's wrong here
Location profiles do not restrict worker access.
- ✗
Assign batch attributes to high-value materials and use batch reservation. Restrict picking by setting up a separate warehouse for high-value items.
Why it's wrong here
Batch attributes are for batch management, not worker restriction.
- ✗
Use inventory status to block high-value items and create a quality order to release them. Enable automatic reservation in master planning parameters.
Why it's wrong here
Inventory status blocks all users, not specific workers.
- ✓
Configure production reservation in the production control parameters to reserve materials automatically when production orders are firm planned. Create a new warehouse location for high-value items, and set up a mobile device menu item with a worker filter to restrict picking to authorized workers.
Why this is correct
Automates reservation and restricts picking via worker filter.
Related concept
OSPF neighbours must agree on key parameters.
Common exam traps
Common exam trap: OSPF can fail even when IP connectivity looks correct
OSPF neighbour formation depends on matching areas, timers, network type, authentication and passive-interface behaviour. Do not choose an answer only because the devices can ping.
Detailed technical explanation
How to think about this question
OSPF questions usually test the details that control adjacency and route selection. Read the neighbour state, area, router ID and interface configuration before deciding what is wrong.
KKey Concepts to Remember
- OSPF neighbours must agree on key parameters.
- Router ID selection can affect neighbour relationships and LSDB output.
- OSPF cost influences the preferred path.
- A route can appear in OSPF information but not become the installed route.
TExam Day Tips
- Check area mismatch first when OSPF adjacency fails.
- Review passive interfaces when a network is advertised but no neighbour forms.
- Use show ip ospf neighbor and show ip route clues carefully.
Key takeaway
OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.
Real-world example
How this comes up in practice
A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.
What to study next
Got this wrong? Here's your next step.
Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related MB-920 OSPF questions on adjacency and route selection.
- →
Describe Dynamics 365 Supply Chain Management — study guide chapter
Learn the concepts, then practise the questions
- →
Describe Dynamics 365 Supply Chain Management practice questions
Targeted practice on this topic area only
- →
All MB-920 questions
966 questions across all exam domains
- →
Microsoft Dynamics 365 Fundamentals ERP MB-920 study guide
Full concept coverage aligned to exam objectives
- →
MB-920 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related MB-920 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Describe Dynamics 365 Supply Chain Management practice questions
Practise MB-920 questions linked to Describe Dynamics 365 Supply Chain Management.
Describe Dynamics 365 Finance practice questions
Practise MB-920 questions linked to Describe Dynamics 365 Finance.
Describe the core capabilities of the finance and operations apps practice questions
Practise MB-920 questions linked to Describe the core capabilities of the finance and operations apps.
Describe shared features and Copilot capabilities practice questions
Practise MB-920 questions linked to Describe shared features and Copilot capabilities.
Describe Dynamics 365 Human Resources practice questions
Practise MB-920 questions linked to Describe Dynamics 365 Human Resources.
Describe Dynamics 365 Commerce practice questions
Practise MB-920 questions linked to Describe Dynamics 365 Commerce.
Describe Dynamics 365 Project Operations practice questions
Practise MB-920 questions linked to Describe Dynamics 365 Project Operations.
Describe shared Dynamics 365 ERP features practice questions
Practise MB-920 questions linked to Describe shared Dynamics 365 ERP features.
MB-920 fundamentals practice questions
Practise MB-920 questions linked to MB-920 fundamentals.
MB-920 scenario practice questions
Practise MB-920 questions linked to MB-920 scenario.
MB-920 troubleshooting practice questions
Practise MB-920 questions linked to MB-920 troubleshooting.
Practice this exam
Start a free MB-920 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this MB-920 question test?
Describe Dynamics 365 Supply Chain Management — This question tests Describe Dynamics 365 Supply Chain Management — OSPF neighbours must agree on key parameters..
What is the correct answer to this question?
The correct answer is: Configure production reservation in the production control parameters to reserve materials automatically when production orders are firm planned. Create a new warehouse location for high-value items, and set up a mobile device menu item with a worker filter to restrict picking to authorized workers. — To automatically reserve materials, configure production reservation (option C). To restrict picking, set up location directives with a specific warehouse location for high-value items and create a mobile device menu item that requires a worker filter. Option C is correct. Option A uses location profiles which do not restrict workers. Option B uses inventory status which blocks entire stock but not per worker. Option D uses batch attributes which are for batch-controlled items.
What should I do if I get this MB-920 question wrong?
Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related MB-920 OSPF questions on adjacency and route selection.
What is the key concept behind this question?
OSPF neighbours must agree on key parameters.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 21, 2026
This MB-920 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the MB-920 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.