The answer is configure the enrichment provider, select the fields to enrich, and map the external data to your customer attributes. These three steps form the core of enrichment setup in Dynamics 365 Customer Insights - Data, where you first establish a connection to a third-party demographic source, then choose which existing fields in your customer profiles should be enriched, and finally map the incoming external data to those attributes to merge the new information. On the MB-910 exam, this question tests your understanding of the enrichment workflow as a data-importing process, not an export—so a common trap is confusing enrichment with data export or general data management tasks like configuring data sources. Remember the mnemonic "C-S-M": Configure the provider, Select the fields, Map the attributes.
MB-910 Describe Dynamics 365 Customer Insights Practice Question
This MB-910 practice question tests your understanding of describe dynamics 365 customer insights. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An organization uses Dynamics 365 Customer Insights - Data. They want to ensure that the customer profiles are enriched with demographic data from a third-party provider. Which THREE steps are necessary to set up enrichment? (Choose three.)
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Select the fields to be enriched
To set up enrichment, you need to configure the enrichment source (Option A), select the fields to enrich (Option D), and map the external data to your customer attributes (Option E). Option B is not necessary; enrichment imports data, it does not export. Option C is not specific to enrichment; it is a general step for data management.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✓
Select the fields to be enriched
Why this is correct
You must specify which fields (e.g., demographic) to enrich.
Related concept
Static NAT maps one inside address to one outside address.
✓
Map the external data attributes to your customer attributes
Why this is correct
Mapping ensures the external data aligns with your schema.
Related concept
Static NAT maps one inside address to one outside address.
✗
Create an export destination for the enriched data
Why it's wrong here
Export destinations are for outputting data, not for enrichment.
✓
Configure the enrichment provider
Why this is correct
You must select and configure a third-party enrichment provider.
Related concept
Static NAT maps one inside address to one outside address.
✗
Define a matching rule to merge enriched data
Why it's wrong here
Matching rules are used during unification, not enrichment.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Trap categories for this question
Command / output trap
Export destinations are for outputting data, not for enrichment.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
Static NAT maps one inside address to one outside address.
PAT allows many inside hosts to share one public address using ports.
Inside local and inside global describe the private and translated addresses.
NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
→Identify inside and outside interfaces first.
→Check whether the scenario needs static NAT, dynamic NAT or PAT.
→Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related MB-910 NAT questions on configuration and troubleshooting.
Describe Dynamics 365 Customer Insights — This question tests Describe Dynamics 365 Customer Insights — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Select the fields to be enriched — To set up enrichment, you need to configure the enrichment source (Option A), select the fields to enrich (Option D), and map the external data to your customer attributes (Option E). Option B is not necessary; enrichment imports data, it does not export. Option C is not specific to enrichment; it is a general step for data management.
What should I do if I get this MB-910 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related MB-910 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This MB-910 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the MB-910 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.