Courseiva

100-140 · topic practice

Security practice questions

The Security domain of the Cisco Certified Support Technician (IT Support) exam covers foundational network defense on Cisco devices: controlling traffic with ACLs, hardening device access with passwords and SSH, stopping spoofing at the edge, and using Layer 2 features like port security and PortFast safely. Questions are scenario-based, asking you to pick the feature or command that solves a stated problem.

Courseiva uses original exam-style practice questions designed for learning and revision. The goal is to understand the concepts, recognise exam patterns, and improve through explanations — not memorise copied exam dumps.

Editorial oversight:Johnson Ajibi· MSc IT Security, IEEE Senior Member
20 questionsDomain: Security

What the exam tests

What to know about Security

Be able to match a stated security goal to the correct Cisco feature or command and know where it is applied. The single most important thing: ACLs and anti-spoofing filters must be placed and directed correctly so legitimate traffic is not blocked while invalid traffic is dropped.

Purpose and placement of standard and extended ACLs on router interfaces

Anti-spoofing techniques such as uRPF and ACLs that drop invalid source addresses

Device hardening with enable secret, service password-encryption, and SSH instead of Telnet

Layer 2 port security and PortFast behavior on access ports for end-user devices

Watch out for

Common Security exam traps

  • ▸Confusing standard ACLs (filter by source only, placed near destination) with extended ACLs (filter source, destination, protocol, port, placed near source).
  • ▸Assuming 'enable secret' and 'enable password' are equivalent; 'enable secret' is hashed and takes precedence, while 'enable password' is weaker.
  • ▸Thinking PortFast disables STP or adds security; it only lets an access port skip listening/learning states, so it must not be used toward switches.

Practice set

Security questions

20 questions · select your answer, then reveal the explanation

Question 1hardmultiple choice
Study the full ACL explanation →

Refer to the exhibit. What is the effect of applying this ACL to a router interface?

Exhibit

access-list 101 deny ip 192.168.1.0 0.0.0.255 any
access-list 101 permit ip any any
Question 2easymultiple choice
Read the full Security explanation →

Which security threat involves an attacker sending unsolicited bulk messages to a network to overwhelm resources and disrupt services?

Question 3easymultiple choice
Read the full wireless explanation →

A small office's wireless router is still using its factory-default SSID and admin credentials, and WPS is enabled. A technician is asked to harden the wireless configuration. Which single change most directly reduces the risk of an unauthorized person guessing their way onto the network?

Question 4hardmulti select
Review the full routing breakdown →

A security analyst is reviewing a Cisco IOS router configuration to harden device access. The analyst wants to ensure that only secure management protocols are used and that user credentials are not sent in clear text. Which two commands or configurations should the analyst verify are in place? (Choose two.)

Question 5mediummultiple choice
Read the full Security explanation →

An employee's laptop was lost at an airport. The laptop has full-disk encryption enabled with a strong passphrase, and the user's account password is also strong. The company wants to reduce the chance that data on the drive can be read if the device is recovered by a thief. Which additional control best addresses the residual risk?

Question 6mediummultiple choice
Read the full Security explanation →

A network administrator needs to prevent unauthorized devices from connecting to a switch port. Which security feature should be implemented to ensure only authorized MAC addresses can communicate through specific interfaces?

Question 7easymultiple choice
Read the full Security explanation →

Which protocol provides secure, encrypted remote management of network devices by replacing legacy Telnet?

Question 8mediummultiple choice
Read the full Security explanation →

Refer to the exhibit. What is the effect of this configuration on interface Gi0/1?

Exhibit

Switch(config)# interface gi0/1
Switch(config-if)# switchport mode access
Switch(config-if)# switchport port-security
Switch(config-if)# switchport port-security maximum 1
Switch(config-if)# switchport port-security violation shutdown
Question 9mediummulti select
Read the full Security explanation →

Which TWO of the following are considered best practices for securing physical access to network infrastructure? (Choose two.)

Question 10mediummultiple choice
Review the full routing breakdown →

Which mechanism is used by Cisco routers to prevent spoofed IP packets from entering the network by verifying the source address against the routing table?

Question 11hardmultiple choice
Read the full Security explanation →

An organization wants to authenticate users connecting to the network using a centralized server. Which protocol allows for secure communication between the network access device and the authentication server?

Question 12mediummulti select
Study the full AAA explanation →

Which THREE of the following are components of the AAA framework in Cisco security? (Choose three.)

Question 13easymultiple choice
Study the full ACL explanation →

What is the primary purpose of an Access Control List (ACL) in a Cisco network environment?

Question 14mediummultiple choice
Study the full ACL explanation →

Refer to the exhibit. What effect does this ACL have on traffic?

Exhibit

access-list 101 permit tcp 192.168.1.0 0.0.0.255 any eq 80
access-list 101 deny ip any any
Question 15mediummultiple choice
Read the full Security explanation →

Which security threat involves an attacker sending a large number of spoofed requests to a service to make it unavailable to legitimate users?

Question 16easymultiple choice
Read the full DHCP explanation →

Which security measure specifically prevents rogue DHCP servers from providing incorrect IP configuration to hosts in a network?

Question 17mediummultiple choice
Read the full Security explanation →

What is the primary benefit of enabling 'portfast' on access ports where end-user devices are connected?

Question 18hardmultiple choice
Read the full Security explanation →

Refer to the exhibit. What will occur if a third device with a different MAC address is plugged into Gi0/1?

Exhibit

Switch(config)# interface gi0/1
Switch(config-if)# switchport port-security
Switch(config-if)# switchport port-security mac-address sticky
Switch(config-if)# switchport port-security maximum 2
Question 19easymultiple choice
Read the full Security explanation →

Which of the following is an example of social engineering in an IT security context?

Question 20hardmultiple choice
Read the full Security explanation →

Which protocol is most secure for providing authentication and integrity for network management traffic?

Free account

Track your progress over time

Create a free account to save your results and see which topics improve across sessions.

Focused Security sessions

Start a Security only practice session

Every question in these sessions is drawn from the Security domain — nothing else.

Related practice questions

Related 100-140 topic practice pages

Move into related areas when this topic feels solid.

Frequently asked questions

What does the 100-140 exam test about Security?
Be able to match a stated security goal to the correct Cisco feature or command and know where it is applied. The single most important thing: ACLs and anti-spoofing filters must be placed and directed correctly so legitimate traffic is not blocked while invalid traffic is dropped.
How should I use these practice questions?
Select your answer before revealing the explanation. Then read why each option is right or wrong — this active recall approach builds retention far faster than re-reading notes.
Can I practise just Security questions in a focused session?
Yes — the session launcher on this page draws every question from the Security domain. Use a 10-question session first to gauge your baseline, then move to 20 or 30 once the weak spots are clear.
Where can I practise other 100-140 topics?
Use the topic links above to move to related areas, or go back to the 100-140 question bank to see all topics.
Are these real exam questions or dumps?
These are original practice questions written to test the same concepts the 100-140 exam covers. They are not copied from any real exam or dump site.