A help desk technician receives a ticket from a user reporting that their wireless mouse stopped working after they moved to a different desk. The user states the mouse worked fine that morning. The technician confirms the mouse is powered on and the USB receiver is plugged into a different USB port on the same laptop. Other USB devices work. Which troubleshooting step should the technician take NEXT?
Trap 1: Replace the mouse batteries with fresh ones.
The user confirmed the mouse is powered on, and the failure coincided with a physical move, not battery depletion. Replacing batteries might be a valid later step if power indicators are misleading, but it does not address the new desk variable. The technician should first validate the receiver and port because those changed immediately before the fault appeared.
Trap 2: Reinstall the mouse driver from the manufacturer's website.
Reinstalling the driver is premature because the mouse worked earlier and other USB devices function. The move to a new desk introduced a physical variable, so the technician should first verify the receiver connection and port before altering software. Driver corruption is possible but less likely than a loose or blocked receiver, so this step skips the most probable and quickest fix.
Trap 3: Pair the mouse again using Bluetooth settings.
The scenario describes a USB receiver, not a Bluetooth connection, so pairing through Bluetooth settings is irrelevant. Attempting Bluetooth pairing would not restore a receiver-based mouse and could confuse the user. The technician must work within the actual connection type and first verify the receiver is properly seated in a working port.
- A
Replace the mouse batteries with fresh ones.
Why it fails: The user confirmed the mouse is powered on, and the failure coincided with a physical move, not battery depletion. Replacing batteries might be a valid later step if power indicators are misleading, but it does not address the new desk variable. The technician should first validate the receiver and port because those changed immediately before the fault appeared.
- B
Reinstall the mouse driver from the manufacturer's website.
Why it fails: Reinstalling the driver is premature because the mouse worked earlier and other USB devices function. The move to a new desk introduced a physical variable, so the technician should first verify the receiver connection and port before altering software. Driver corruption is possible but less likely than a loose or blocked receiver, so this step skips the most probable and quickest fix.
- C
Check that the USB receiver is fully seated and try a different USB port.
The scenario indicates the receiver was moved to a different USB port, which may be loose, damaged, or blocked. Reseating the receiver and testing another port directly addresses the physical change that preceded the failure. This is a fast, non-invasive step that confirms whether the issue is the connection before escalating to driver or hardware replacement.
- D
Pair the mouse again using Bluetooth settings.
Why it fails: The scenario describes a USB receiver, not a Bluetooth connection, so pairing through Bluetooth settings is irrelevant. Attempting Bluetooth pairing would not restore a receiver-based mouse and could confuse the user. The technician must work within the actual connection type and first verify the receiver is properly seated in a working port.