A network technician is replacing a failed power supply in a Cisco Catalyst 9300 switch. The switch has two power supply slots and currently one AC power supply is installed and operational. The technician inserts a new power supply of the same model but with a different wattage rating. What will be the resulting behavior?
Trap 1: The switch will automatically downgrade the higher-wattage power…
Power supplies cannot be downgraded in wattage through software or automatic negotiation. The wattage is determined by hardware design. The switch cannot alter the output capability of a power supply. Therefore, it will not combine them but will use the higher-wattage unit and report the mismatch.
Trap 2: The switch will immediately power off to prevent damage from the…
Cisco Catalyst switches are designed for redundancy and do not power off abruptly when a mismatched power supply is inserted. Instead, they isolate the incompatible supply and continue running on the compatible one. Powering off would cause unnecessary downtime and is not the designed behavior for a hot-swappable power supply mismatch.
Trap 3: The switch will operate in combined mode, summing the wattage of…
Cisco Catalyst 9300 power supplies must be of the same wattage to operate in combined mode. Mixing different wattage ratings typically results in the switch using only the higher-wattage supply or entering a fault condition. The AC phase requirement is irrelevant to power supply compatibility; the key factor is matching wattage and model.
- A
The switch will continue to operate using only the higher-wattage power supply and will log a syslog message indicating a power supply mismatch.
When power supplies of different wattage are installed in a Catalyst 9300, the switch does not combine them. It uses the higher-wattage supply to power the chassis and may place the lower-wattage supply in a standby or fault state. A syslog message is generated to alert the administrator of the mismatch. This ensures the switch does not attempt to draw more power than a single supply can provide.
- B
The switch will automatically downgrade the higher-wattage power supply to match the lower wattage, allowing combined operation.
Why it fails: Power supplies cannot be downgraded in wattage through software or automatic negotiation. The wattage is determined by hardware design. The switch cannot alter the output capability of a power supply. Therefore, it will not combine them but will use the higher-wattage unit and report the mismatch.
- C
The switch will immediately power off to prevent damage from the mismatched power supplies.
Why it fails: Cisco Catalyst switches are designed for redundancy and do not power off abruptly when a mismatched power supply is inserted. Instead, they isolate the incompatible supply and continue running on the compatible one. Powering off would cause unnecessary downtime and is not the designed behavior for a hot-swappable power supply mismatch.
- D
The switch will operate in combined mode, summing the wattage of both power supplies, provided they are both connected to the same AC phase.
Why it fails: Cisco Catalyst 9300 power supplies must be of the same wattage to operate in combined mode. Mixing different wattage ratings typically results in the switch using only the higher-wattage supply or entering a fault condition. The AC phase requirement is irrelevant to power supply compatibility; the key factor is matching wattage and model.