CCNA lab 17
Wireless: a WPA2-PSK WLAN on a 9800 controller
Use the controller's web interface to create a WPA2-PSK WLAN, put its clients in VLAN 20 with a policy profile, publish it on the AP with a policy tag, and connect a laptop.
About 30 minutes 5 devices 4 tasksIntermediate
Scenario
AP1 has already joined the 9800 controller WLC1 (its management interface is Vlan10, 10.10.10.5). Staff need a Wi-Fi network: SSID Staff, WLAN ID 1, WPA2 with the pre-shared key Staff2026!, and staff devices must land in VLAN 20 (10.20.20.0/24), where R1 runs DHCP. Configure it from WLC1's web interface (or its CLI), then connect LAPTOP1 and check that it reaches the internet host 8.8.8.8.
Your tasks
- WLAN profile Staff (ID 1, SSID Staff) uses WPA2 with a pre-shared key, not 802.1X, and is enabled.
- Policy profile STAFF-POLICY puts clients in VLAN 20 and is enabled.
- Policy tag STAFF-TAG maps Staff to STAFF-POLICY, and AP1 uses it.
- LAPTOP1 connects to Staff, gets an address in 10.20.20.0/24 and can ping 8.8.8.8.
The lab checks the result, not the exact commands. For example, a ping task passes only when the ping really succeeds through the network you built.