- A
Use a 'Scope' action to group actions and configure error handling
A scope can have its own 'Run after' configuration to handle errors collectively.
- B
Use the 'Configure run after' option to set alternative actions on failure
This is the same as option A but phrased differently; it is a key feature.
- C
Enable 'Retry policy' on an action to automatically retry on failure
Why wrong: Retry policy is a configuration on an action, but it is not an action itself. However, the question asks for 'actions', not configurations. But retry policy is a feature; still, it's not an action. The correct three are A, B, C.
- D
Use the 'if' function in expressions to check for errors
Why wrong: The 'if' function is used in expressions but is not an action for error handling.
- E
Configure 'Run after' settings on an action
'Run after' allows you to specify what happens if the previous action fails, is skipped, or times out.
Quick Answer
The correct answer is Configure 'Run after' settings on an action, along with the Scope action and the Terminate action, as these three are the built-in tools Power Automate provides for error handling. The Scope action groups multiple actions together and allows you to apply consistent Run after settings to the entire group, enabling you to define what happens when any action inside it succeeds, fails, is skipped, or times out. The Terminate action stops a flow immediately with a custom status, which is useful for halting execution after a critical error. On the PL-900 exam, this question tests your understanding of flow control and exception management, often appearing as a multi-select scenario where you must distinguish actions from configurations or expressions. A common trap is confusing the Configure Run after settings with the Run after expression, but remember that Run after is a configuration on an action, not a standalone action itself. Memory tip: think of the three as the "Scoop, Set, and Stop" — Scope groups, Configure Run after sets conditions, and Terminate stops the flow.
PL-900 Practice Question: Demonstrate the capabilities of Power Automate
This PL-900 practice question tests your understanding of demonstrate the capabilities of power automate. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which THREE actions are available in Power Automate to handle errors and exceptions?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Use a 'Scope' action to group actions and configure error handling
Power Automate provides built-in actions for error handling. Option A is a scope action that can have run after settings. Option B is a configuration on actions. Option C is a built-in action. Option D is not an action; it's an expression. Option E is a configuration on actions.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Use a 'Scope' action to group actions and configure error handling
Why this is correct
A scope can have its own 'Run after' configuration to handle errors collectively.
Related concept
Static NAT maps one inside address to one outside address.
- ✓
Use the 'Configure run after' option to set alternative actions on failure
Why this is correct
This is the same as option A but phrased differently; it is a key feature.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
Enable 'Retry policy' on an action to automatically retry on failure
Why it's wrong here
Retry policy is a configuration on an action, but it is not an action itself. However, the question asks for 'actions', not configurations. But retry policy is a feature; still, it's not an action. The correct three are A, B, C.
- ✗
Use the 'if' function in expressions to check for errors
Why it's wrong here
The 'if' function is used in expressions but is not an action for error handling.
- ✓
Configure 'Run after' settings on an action
Why this is correct
'Run after' allows you to specify what happens if the previous action fails, is skipped, or times out.
Related concept
Static NAT maps one inside address to one outside address.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PL-900 NAT questions on configuration and troubleshooting.
- →
Demonstrate the capabilities of Power Automate — study guide chapter
Learn the concepts, then practise the questions
- →
Demonstrate the capabilities of Power Automate practice questions
Targeted practice on this topic area only
- →
All PL-900 questions
976 questions across all exam domains
- →
Microsoft Power Platform Fundamentals PL-900 study guide
Full concept coverage aligned to exam objectives
- →
PL-900 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PL-900 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Identify foundational components of Power Platform practice questions
Practise PL-900 questions linked to Identify foundational components of Power Platform.
Demonstrate capabilities of Power BI practice questions
Practise PL-900 questions linked to Demonstrate capabilities of Power BI.
Describe complementary Microsoft Power Platform solutions practice questions
Practise PL-900 questions linked to Describe complementary Microsoft Power Platform solutions.
Demonstrate the capabilities of Power Automate practice questions
Practise PL-900 questions linked to Demonstrate the capabilities of Power Automate.
Describe the business value of Microsoft Power Platform practice questions
Practise PL-900 questions linked to Describe the business value of Microsoft Power Platform.
Manage the Microsoft Power Platform environment practice questions
Practise PL-900 questions linked to Manage the Microsoft Power Platform environment.
Identify foundational components of Microsoft Power Platform practice questions
Practise PL-900 questions linked to Identify foundational components of Microsoft Power Platform.
Demonstrate the capabilities of Power BI practice questions
Practise PL-900 questions linked to Demonstrate the capabilities of Power BI.
Demonstrate the capabilities of Power Apps practice questions
Practise PL-900 questions linked to Demonstrate the capabilities of Power Apps.
Demonstrate the capabilities of Microsoft Copilot Studio practice questions
Practise PL-900 questions linked to Demonstrate the capabilities of Microsoft Copilot Studio.
Demonstrate the capabilities of Power Pages practice questions
Practise PL-900 questions linked to Demonstrate the capabilities of Power Pages.
PL-900 fundamentals practice questions
Practise PL-900 questions linked to PL-900 fundamentals.
Practice this exam
Start a free PL-900 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PL-900 question test?
Demonstrate the capabilities of Power Automate — This question tests Demonstrate the capabilities of Power Automate — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Use a 'Scope' action to group actions and configure error handling — Power Automate provides built-in actions for error handling. Option A is a scope action that can have run after settings. Option B is a configuration on actions. Option C is a built-in action. Option D is not an action; it's an expression. Option E is a configuration on actions.
What should I do if I get this PL-900 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PL-900 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
2 more ways this is tested on PL-900
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Which TWO actions can be used to implement error handling in a Power Automate flow? (Choose two.)
medium- ✓ A.Configure Run After settings
- B.Apply to each
- C.Compose
- ✓ D.Scope
- E.Condition
Why A: Options B and C are correct. Configure Run After settings allow running subsequent actions on failure. Scope actions group actions and allow configuration of error handling at the scope level. Option A is wrong because 'Condition' is for branching, not error handling. Option D is wrong because 'Compose' is for data manipulation. Option E is wrong because 'Apply to each' is for loops.
Variation 2. Which TWO actions can be used to implement error handling in a Power Automate flow?
medium- ✓ A.Use a Scope action to group actions and configure error handling
- B.Add a Condition action to check for errors
- C.Use a Compose action to store error details
- ✓ D.Configure Run After settings
- E.Add an Apply to Each action
Why A: Options A and C are correct because Configure Run After and Scope allow error handling. Option B is wrong because it's for actions. Option D is wrong because Conditions are for logic. Option E is wrong because it's not for error handling.
Last reviewed: Jun 21, 2026
This PL-900 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PL-900 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.