SNOW-CSA Self-Service and Automation — Timed 30 Questions

Question 1

A company wants to allow users to submit requests for new software without any manual intervention. Which self-service feature should be used to automate the request process?

Accepted Answer

Record Producer. A Record Producer is the correct self-service feature because it allows users to submit requests for new software through a catalog item without any manual intervention. It automatically creates a record (e.g., a catalog task or request) in the platform based on the user's submission, enabling a fully automated request process.

Answer

Approval Engine

Answer

SLA Definition

Answer

Flow Designer

Question 2

A user reports that a catalog item is not visible to them, but other users in the same department can see it. What is the most likely cause?

Accepted Answer

User criteria restricts visibility. User criteria is a visibility rule applied to catalog items that restricts which users or groups can see the item in the service catalog. If one user cannot see the item while others in the same department can, the most likely cause is that the user criteria on the catalog item excludes that specific user, either by user, role, group, or location criteria.

Answer

The item is in a different category

Answer

The item is out of stock

Answer

The item is not active

Question 3

During peak usage, the Employee Center portal becomes slow. The administrator wants to improve performance without changing the user interface. What is the best practice approach?

Accepted Answer

Enable caching for widgets. Enabling caching for widgets reduces server load and improves page load times by storing rendered widget output in memory, allowing subsequent requests to serve cached content without re-executing the underlying scripts or queries. This directly addresses performance degradation during peak usage without altering the user interface, making it the best practice approach.

Answer

Increase the instance size

Answer

Remove all widgets from the homepage

Answer

Disable the search feature

Question 4

An administrator wants to automate the fulfillment of a catalog item that requires approval from the user's manager. Which combination of features should be used?

Accepted Answer

Flow Designer with Approval step. Option C is correct because Flow Designer provides a native Approval step that can be configured to route the request to the user's manager via the Manager field on the sys_user record. This allows the entire fulfillment process—including approval and subsequent actions—to be automated within a single Flow, eliminating the need for separate approval engine configurations or manual intervention.

Answer

Virtual Agent and Flow Designer

Answer

Record Producer and Virtual Agent

Answer

Approval Engine and Email Notification

Question 5

A company uses the Employee Center portal. Users report that they cannot find a specific service when using the search bar. The service exists and is active. What is the most likely cause?

Accepted Answer

The search index is not built for that service. The Employee Center portal relies on a search index to surface services. Even if a service is active and properly configured, the search index must be built or rebuilt for that specific service to appear in search results. Without an up-to-date index, the search bar will not return the service, which directly matches the reported symptom.

Answer

The service is inactive

Answer

The service is not in a valid category

Answer

The service owner has restricted visibility

Question 6

An administrator is designing a catalog item for software requests. The item must capture the user's department automatically and pre-populate the cost center. Which feature should be used to achieve this?

Accepted Answer

Variable default value using system properties. Option C is correct because using a variable default value with a system property allows the catalog item to automatically populate the department and cost center fields based on the logged-in user's data. System properties can reference user attributes (e.g., sys_user.department) to dynamically set default values without requiring client-side scripts or UI policies.

Answer

Catalog Client Script

Answer

UI Policy

Answer

Client Script

Question 7

A company wants to allow users to reset their own passwords through the portal. Which feature should be enabled?

Accepted Answer

Password Reset. The Password Reset feature in ServiceNow allows users to reset their own passwords through the portal without requiring administrator intervention. This is achieved by configuring password reset policies, security questions, and email verification, enabling self-service password management directly within the platform.

Answer

SSO Configuration

Answer

LDAP Integration

Answer

Virtual Agent

Question 8

A catalog item has multiple variables, and the administrator wants to show a variable only if a previous variable is set to a specific value. Which feature should be used?

Accepted Answer

UI Policy. A UI Policy is the correct feature because it allows an administrator to dynamically show or hide catalog item variables based on the value of a previous variable, without requiring any client-side scripting. UI Policies run on the client side and evaluate conditions in real-time, making them ideal for this declarative, condition-based visibility requirement.

Answer

Client Script

Answer

Catalog Client Script

Answer

Access Control List (ACL)

Question 9

Which TWO are benefits of using Service Catalog with Record Producers?

Accepted Answer

Ability to create records in any table. Option C is correct because Record Producers can be configured to create records in any table, not just the task or incident tables. This allows organizations to automate record creation across custom tables, extending the flexibility of Service Catalog beyond standard ITSM processes.

Answer

No need to design a flow

Answer

Support for order guides

Answer

Automatic variable creation

Question 10

Which TWO are best practices for managing catalog items in a ServiceNow instance?

Accepted Answer

Test catalog items in a sub-production instance before moving to production. Option B is correct because testing catalog items in a sub-production instance (e.g., a development or test instance) before moving them to production is a fundamental best practice in ServiceNow. This allows you to validate variable behavior, workflow logic, and UI policies without risking disruption to live users. ServiceNow recommends using update sets or application repositories to promote tested catalog items from a sub-production instance to production.

Answer

Assign each catalog item to exactly one category

Answer

Clone production catalog items to test instance for testing

Answer

Use database views to display catalog item details

Question 11

Which THREE are components of the Employee Center portal?

Accepted Answer

Knowledge Base. The Employee Center portal is a dedicated self-service portal in ServiceNow that provides employees with a unified interface to access common services. The Knowledge Base is a core component because it allows employees to search for and read articles to resolve issues without creating a ticket, directly supporting self-service and deflection.

Answer

Flow Designer

Answer

Instance Dashboard

Question 12

You are the ServiceNow administrator for a large enterprise with over 10,000 users. The company uses the Employee Center portal for self-service. Recently, users have reported that when they submit a catalog item, the confirmation page takes over 30 seconds to load, and sometimes they receive a timeout error. The issue only occurs for catalog items that have a workflow attached. The workflows are complex with multiple approval stages and notifications. The server logs show no errors, but the average response time for catalog item submissions with workflows is 45 seconds, compared to 5 seconds for items without workflows. The instance is running on a medium-sized node with default settings. You need to resolve the performance issue without changing the workflow logic or the user interface. What should you do?

Accepted Answer

Configure the workflows to run asynchronously. Option B is correct because configuring workflows to run asynchronously decouples the workflow execution from the synchronous HTTP request-response cycle. This means the catalog item submission completes immediately (within seconds), while the workflow runs in the background. This directly addresses the 45-second response time for items with workflows without altering the workflow logic or UI.

Answer

Disable all approval stages in the workflows

Answer

Upgrade the instance to a larger node size

Answer

Move the workflows to a separate instance

Question 13

You are troubleshooting an issue with the Virtual Agent chatbot. Users report that when they ask the chatbot 'How do I reset my password?', the chatbot responds with 'I'm sorry, I don't understand that question.' However, the chatbot correctly answers other questions like 'What is the IT support number?' The password reset topic is configured with a user input of 'password reset' and a response that provides instructions. The chatbot's NLU model has been trained with over 50 utterances for the password reset topic. The issue started after a recent update to the chatbot's configuration. What is the most likely cause?

Accepted Answer

The password reset topic is inactive. The issue started after a recent configuration update, and the password reset topic is correctly configured with a user input and response. The most likely cause is that the topic was accidentally set to inactive, which prevents the chatbot from matching any user utterances to it, even though the NLU model is trained. An inactive topic will not be considered during intent classification, resulting in the fallback response.

Answer

The password reset topic was deleted

Answer

The NLU model needs more training utterances

Answer

The user input does not match any utterances exactly

Question 14

A company wants to allow users to submit requests for new software installations through the Service Portal. The catalog item should show different options based on the user's department. Which feature should be configured on the catalog item to achieve this?

Accepted Answer

Variable visibility conditions. Variable visibility conditions allow you to control which catalog item variables are displayed to users based on conditions such as the user's department field. When a user from a specific department submits a request, only the variables that match their department's visibility condition will appear, enabling dynamic form behavior without creating separate catalog items.

Answer

Variable order

Answer

Catalog item templates

Answer

User criteria

Question 15

A user reports that when they submit a catalog item request from the Service Portal, they do not receive an email notification. The notification is configured correctly and works for other users. What should the administrator check first?

Accepted Answer

The user's notification preference or subscription. Option A is correct because the user's notification preference or subscription is the first place to check when a single user does not receive notifications while others do. ServiceNow allows users to configure their own notification preferences, including opting out of certain notifications, which overrides system-level notification configurations. The administrator should verify that the user has not disabled the specific notification or unsubscribed from it.

Answer

The email notification properties

Answer

The workflow attached to the catalog item

Answer

The notification configuration on the catalog item

Question 16

A developer writes the script include above to create an approval record. When the method is called from a business rule on the requested item table, the approval is created but assigned to the wrong user. What is the most likely cause?

Accepted Answer

The method uses gs.getUser() which returns the current user running the script, not the intended approver. The script uses `gs.getUser()` to set the approver, which returns the user currently running the script (the system user or the user triggering the business rule), not the intended approver. In ServiceNow, `gs.getUser()` retrieves the session user, which in a business rule context is the user who triggered the rule, not necessarily the user who should approve the request. To assign the correct approver, the script should reference a field from the current record (e.g., `current.approver`) or use a specific user sys_id.

Answer

The method should use 'new GlideRecord' instead of 'var gr'

Answer

The method is not using the correct GlideRecord table name

Answer

The method should call rec.update() after inserting the approval

Question 17

An administrator notices that a scheduled job that creates Catalog Tasks from a report runs successfully but produces duplicate tasks for the same request. What is the most likely cause?

Accepted Answer

The report does not filter out tasks that have already been created. Option A is correct because the most likely cause of duplicate Catalog Tasks is that the report driving the scheduled job does not include a filter to exclude records for which a task has already been created. Without this filter, each time the job runs, it re-evaluates the same source records and creates a new task for each, leading to duplicates.

Answer

The scheduled job uses the 'Run once' option

Answer

The report condition uses '=' instead of 'starts with'

Answer

The scheduled job runs too frequently

Question 18

Which TWO statements are true about Service Catalog variables? (Choose two.)

Accepted Answer

Variables can be conditionally visible based on the value of another variable. Option B is correct because Service Catalog variables can be configured with a 'Visible if' condition that evaluates the value of another variable on the same catalog item. This allows dynamic form behavior where a variable is shown or hidden based on user input, such as showing a 'Reason' field only when a 'Request Type' variable is set to 'Other'.

Answer

Variables cannot be reordered after creation

Answer

Variables can be used in catalog item availability conditions

Answer

Default values for variables can be set in the workflow

Question 19

An organization wants to allow managers to approve requests from their direct reports through the mobile app. Which type of approval rule should be configured?

Accepted Answer

Approval - Manager. The Approval - Manager rule is correct because it automatically routes approval requests to the manager of the requester based on the manager relationship defined in the user record. This rule is specifically designed for scenarios where managers need to approve requests from their direct reports, leveraging the built-in manager hierarchy in ServiceNow.

Answer

User approval

Answer

Role approval

Answer

Group approval

Question 20

A large enterprise uses ServiceNow for IT Service Management. They have a custom application that generates incidents automatically from monitoring alerts. The incidents are assigned to the 'Monitoring Queue' group. Recently, the team noticed that some incidents are not being assigned to any group and remain unassigned. Upon investigation, the administrator finds that the assignment rule for the 'Monitoring Queue' group uses a condition 'Category = Network' AND 'Impact = 3'. However, many alerts have 'Category' set to 'Network' but 'Impact' left blank. The administrator needs to ensure that all incidents from monitoring alerts with 'Category = Network' are assigned to the 'Monitoring Queue' group, regardless of impact. What should the administrator do?

Accepted Answer

Modify the existing assignment rule condition to 'Category = Network' only. Option B is correct because modifying the assignment rule condition to only check 'Category = Network' ensures that all incidents with that category are assigned to the 'Monitoring Queue' group, regardless of whether 'Impact' is blank or has any other value. Assignment rules in ServiceNow evaluate conditions against the current record; removing the 'Impact = 3' clause eliminates the dependency on that field. This directly addresses the requirement that incidents from monitoring alerts with 'Category = Network' must always be assigned, even when 'Impact' is not populated.

Answer

Modify the existing assignment rule condition to 'Category = Network' OR 'Impact = 3'

Answer

Create a second assignment rule with condition 'Category = Network' and 'Impact is empty'

Answer

Set a default assignment on the Incident table to assign all unassigned incidents to the Monitoring Queue group