SNOW-CSA Exam Simulation 1 — 100 Questions

Question 1

An administrator creates a notification for the 'incident' table to send an email when the state changes to 'resolved'. The notification works for most users, but some users report not receiving the email. What is the most likely cause?

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

The users have set their 'Notification' preference to 'Do not send' for that type.. The most likely cause is that the users have configured their personal Notification preference to 'Do not send' for that notification type. In ServiceNow, users can override system-level notification settings by setting their preference to suppress specific notification types, which would prevent the email from being sent even though the notification is active and properly configured.

Answer

The notification weight is set too high.

Answer

The notification is not set to 'Active'.

Answer

The notification does not have an email template selected.

Question 2

An organization wants to allow managers to approve requests from their direct reports through the mobile app. Which type of approval rule should be configured?

Accepted Answer

Approval - Manager. The Approval - Manager rule is correct because it automatically routes approval requests to the manager of the requester based on the manager relationship defined in the user record. This rule is specifically designed for scenarios where managers need to approve requests from their direct reports, leveraging the built-in manager hierarchy in ServiceNow.

Answer

User approval

Answer

Role approval

Answer

Group approval

Question 3

Refer to the exhibit. A catalog item 'Laptop Request' requires approval from the 'IT Hardware Approvers' group. The approval rule is 'Any one approves'. What is the current approval state for the request?

Accepted Answer

Waiting for any member of IT Hardware Approvers to approve. The approval rule 'Any one approves' means that the request is approved as soon as a single member of the 'IT Hardware Approvers' group approves it. Since no approval action has been taken yet, the current state is 'Waiting for any member of IT Hardware Approvers to approve'. This is the default pending state for an approval rule set to 'Any' in ServiceNow.

Answer

Approved by Jane Smith

Answer

Waiting for John Doe specifically

Answer

Rejected by Bob Lee

Question 4

A catalog item uses a workflow that includes a 'Wait for Condition' activity. The condition checks if a custom table record 'approval_status' equals 'approved'. Requests are not progressing past this activity even though the record is updated. What could be the issue?

Accepted Answer

The 'Check Condition' property of the activity is set to 'After Update', but the record was already updated before the workflow reached this activity.. The 'Wait for Condition' activity's 'Check Condition' property determines when the condition is evaluated. If set to 'After Update', the condition is only checked when the record is updated after the workflow reaches this activity. If the record was already updated before the workflow reached the 'Wait for Condition' activity, the condition will never be re-evaluated, causing the workflow to stall indefinitely.

Answer

The 'Wait for Condition' activity is not in the same application scope as the custom table.

Answer

The user updating the record does not have the 'workflow_admin' role.

Answer

The custom table record is not related to the catalog item.

Question 5

Which TWO statements about the ServiceNow application navigator are true? (Choose two.)

Accepted Answer

The navigator can be filtered by typing in the filter field.. The ServiceNow application navigator includes a built-in filter field that allows users to quickly locate modules, reports, or other navigator entries by typing keywords. This filter dynamically narrows the displayed items based on the input, improving navigation efficiency without requiring administrative changes.

Answer

The navigator displays all tables in the instance.

Answer

Users can add links to the navigator as favorites.

Answer

End users can add new modules to the navigator.

Question 6

Which TWO of the following are valid ways to modify the layout of a form in ServiceNow?

Accepted Answer

Using the Form Designer. The Form Designer is the dedicated tool in ServiceNow for modifying form layouts, including rearranging fields, adding sections, and configuring field properties. It provides a drag-and-drop interface to control the position and visibility of fields on a form, making it a primary method for layout changes.

Answer

Creating an Access Control Rule (ACL)

Answer

Modifying the Dictionary Override

Answer

Creating a report on the table

Question 7

Which TWO conditions must be true for an SLA to start tracking on an incident? (Choose two.)

Accepted Answer

The SLA definition is set to Active. An SLA definition must be set to 'Active' for it to start tracking on an incident. Only active SLA definitions are evaluated and applied to records; inactive definitions are ignored by the system. This ensures that only intended and configured SLAs are enforced.

Answer

The incident is assigned to a group

Answer

The incident is in a state of 'New'

Answer

The SLA definition has a business schedule attached

Question 8

Which TWO statements about ServiceNow CMDB identification and reconciliation are correct?

Accepted Answer

The Identification and Reconciliation (IRE) engine processes incoming CI data.. The Identification and Reconciliation (IRE) engine is the ServiceNow component responsible for processing incoming CI data from sources like Discovery, Service Mapping, or integrations. It applies identification rules to determine if a CI already exists and reconciliation rules to resolve attribute conflicts, ensuring data integrity in the CMDB.

Answer

The 'Source' field on a CI can be set per attribute.

Answer

Reconciliation rules are used to identify duplicate CIs.

Answer

The CMDB automatically deletes duplicate CIs when detected.

Question 9

An organization uses an approval process for all catalog requests. They want a delegated approver to be able to approve on behalf of the manager. Which configuration is required?

Accepted Answer

Set the 'Approval Delegation' property to true and configure delegates on the user record.. ServiceNow requires both the 'Approval Delegation' system property to be set to true and the delegate to be configured on the user record of the approver. This two-part configuration enables a delegated approver to act on behalf of the manager during an approval process, ensuring the delegation is recognized by the approval engine.

Answer

Enable 'Approval Delegation' on the system property only.

Answer

Use the 'Delegate' related list on the approval rule.

Answer

Configure the delegate in the user record of the approver.

Question 10

Drag and drop the steps to activate a plugin in ServiceNow into the correct order.

Accepted Answer

Navigate to System Applications > All, find the plugin, click the plugin name, click Activate.. Activating a plugin in ServiceNow requires following the correct sequence: first navigate to the plugin list via System Applications > All, then locate the desired plugin, select it, and finally click the Activate button. Any deviation from this order will result in an error or missing functionality.

Answer

Navigate to System Applications > All, click Activate, find the plugin, click the plugin name.

Answer

Find the plugin, navigate to System Applications > All, click the plugin name, click Activate.

Answer

Click the plugin name, navigate to System Applications > All, find the plugin, click Activate.

Question 11

An organization uses ServiceNow Discovery to populate the CMDB. They notice that some CIs are missing required relationships after discovery. What is the most likely reason?

Accepted Answer

The discovery probes and sensors are not configured to create relationships.. Discovery probes and sensors are responsible for collecting data from devices, but they do not automatically create relationships unless specifically configured to do so. If the probes and sensors lack the necessary configuration to identify and record relationships, the discovered CIs will remain isolated in the CMDB. This is the most common cause of missing relationships after a Discovery run.

Answer

The discovered CIs are in different classes that do not have relationship rules.

Answer

The IRE is set to 'reconcile only' and not 'create'.

Answer

The relationship type is not defined in the CMDB.

Question 12

A CMDB administrator is planning to use the CMDB Data Manager to perform data imports. Which THREE statements about the Data Manager are true? (Select exactly 3)

Accepted Answer

It can create relationships between CIs during import.. The CMDB Data Manager can create relationships between Configuration Items (CIs) during the import process. When importing data, you can specify relationship definitions in the import source or transform map, allowing the Data Manager to automatically link CIs (e.g., 'Runs on', 'Depends on') based on the imported data, which is essential for maintaining a complete and accurate CMDB.

Answer

It automatically reconciles imported CIs with existing CIs.

Answer

It can directly import data from external databases.

Question 13

Which THREE statements about Access Control Lists (ACLs) are true? (Choose THREE.)

Accepted Answer

ACLs can be defined for tables, records, fields, and scripts.. In ServiceNow, Access Control Lists (ACLs) can be defined to control access at multiple granularity levels: tables (entire table operations), records (specific rows), fields (individual columns), and scripts (execution of business rules or script includes). This allows administrators to enforce security policies precisely where needed.

Answer

An ACL can only have one role specified.

Answer

An ACL must have a script to evaluate conditions.

Question 14

A company wants to restrict access to CI records based on the business service they belong to. What feature should they use?

Accepted Answer

CMDB Data Segmentation. CMDB Data Segmentation (option C) is the correct feature because it allows administrators to restrict access to CI records based on the business service they belong to, using a segmentation rule that filters CIs by their 'business_service' field. This is specifically designed for multi-tenant or service-based access control in the CMDB, ensuring users only see CIs associated with their assigned business services.

Answer

ACLs on cmdb_ci table

Answer

CMDB Application Access Control

Answer

Condition-based ACLs

Question 15

Your company uses ServiceNow for IT Service Management. The 'incident' table has a custom 'create' ACL that restricts creation of incidents to users with the 'snc_internal' role. However, external users with the 'snc_external' role should also be able to create incidents via a portal. The portal uses a REST message that authenticates as a specific integration user. The integration user has the 'snc_internal' role. Despite the REST API call being successful, external users report that they cannot submit incidents through the portal. The system logs show that the REST API call returns a success, but the incident record is not created. What is the most likely cause?

Accepted Answer

The ACL is evaluated against the portal user, who lacks the 'snc_internal' role.. ServiceNow ACLs are evaluated against the user who initiated the request, not the integration user making the REST API call. In this scenario, the portal widget executes under the context of the portal user (who lacks 'snc_internal'), so the 'create' ACL on the 'incident' table checks that user's roles, not the integration user's roles. Even though the REST message authenticates as an integration user with 'snc_internal', the system logs a success for the API call itself, but the ACL evaluation fails silently when the record creation is attempted, resulting in no incident record being created.

Answer

The integration user's session has expired during the request.

Answer

The portal widget is using a different table name in the API call.

Answer

The REST API endpoint is mapped to the wrong table.

Question 16

A business rule runs on 'before update' of the 'incident' table and sets the 'assigned_to' field to the current user if the assignment group is empty. The rule is in the global scope. However, when a user from another application scope updates an incident via a web service, the field is not being set. What is the most likely cause?

Accepted Answer

The business rule is not configured to run in the 'System' (global) scope across all applications.. The business rule is in the global scope, but by default, business rules in the global scope only run for updates made within the global scope itself. When a user from another application scope updates an incident via a web service, the update originates from that other scope, and the global-scope business rule does not execute unless it is explicitly configured to run in the 'System' (global) scope across all applications. This is controlled by the 'Run in all scopes' checkbox on the business rule record.

Answer

The user making the web service call does not have the 'itil' role.

Answer

The business rule runs after the web service update and the field is already committed.

Answer

The business rule condition is incorrect for web service updates.

Question 17

A company wants to allow users to request software licenses through the service catalog. The request form should automatically populate the user's manager's email address. Which configuration option should the administrator use?

Accepted Answer

Use a default value on the variable with a script that retrieves the manager's email.. A default value on a catalog variable can use a script (e.g., gs.getUser().getManagerEmail()) to dynamically populate the manager's email address when the form loads. This approach directly meets the requirement without requiring additional triggers or lookups.

Answer

Use a Data Lookup definition on the catalog item.

Answer

Use a Flow Designer action to set the variable.

Answer

Use a Catalog Client Script with onChange catalog variable.

Question 18

The flow above is not creating the task record. The variables are not being populated. What is the most likely cause?

Accepted Answer

The catalog item does not have the specified short_description variable.. The flow references a variable named 'short_description' that does not exist on the catalog item. When a flow tries to read a variable that is not defined on the record, the variable resolves to null, causing the 'Create Record' action to fail silently or produce an empty field. This is a common misconfiguration where the variable name in the flow does not match the variable name defined on the catalog item.

Answer

The flow is not yet published.

Answer

The 'Create Record' action requires a 'number' field.

Answer

The trigger conditions are incorrectly referencing the catalog item.

Question 19

An administrator wants to allow end users to reset their own passwords using the 'Forgot Password' feature. Which configuration is required to enable this?

Accepted Answer

Activate the 'Password Reset' plugin.. The 'Forgot Password' feature in ServiceNow is implemented via a plugin called 'Password Reset' (com.snc.password_reset). This plugin must be activated to enable the self-service password reset functionality. Without activating this plugin, the feature is not available regardless of other configurations.

Answer

Assign the 'password_reset' role to end users.

Answer

Configure an email notification for reset password.

Answer

Set the 'Allow password reset' property to true.

Question 20

An organization needs to ensure that when a catalog item is ordered, a task is created for the IT team to provision the requested software. They want to use a flow to automate this. Which configuration should be used?

Accepted Answer

Use a Record Producer to create a task upon catalog item submission.. A Record Producer can be configured on a catalog item to automatically create a task (e.g., a Catalog Task or a custom task) upon submission. This is the native, out-of-box approach for generating tasks from catalog requests without requiring a separate flow or approval rule.

Answer

Add a 'Task' variable to the catalog item.

Answer

Create a Flow that triggers on 'Catalog Task' record creation.

Answer

Configure an approval rule to create a task.