220-1202 Practice Test 2 — 30 Questions

Question 1

During a network upgrade, a technician finds a box of old NICs, cables, and small electronic components that are no longer needed. The company has no formal e-waste policy. What should the technician do?

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

Research local e-waste recycling facilities and present a disposal plan to the manager for approval.. In the absence of a formal e-waste policy, the technician must act responsibly by researching local e-waste recycling facilities and presenting a disposal plan to the manager for approval. This aligns with environmental best practices and regulatory compliance, as improper disposal of electronic components can violate local laws and harm the environment. The technician should not unilaterally dispose of or sell the items without management authorization.

Answer

Throw the items in the dumpster since they are small and the company has no policy.

Answer

Store the items indefinitely in a closet until a policy is created.

Answer

Sell the items online as a lot to a recycler.

Question 2

During a software deployment, you need to ensure that a legacy application always runs with administrative privileges, even for standard users. How can you configure this using Windows built-in tools?

Accepted Answer

Set the application's shortcut to 'Run as administrator' in the Compatibility tab. The Compatibility tab in a shortcut's properties allows you to set the 'Run as administrator' flag, which embeds a compatibility manifest that prompts for elevation via UAC when the application is launched. This ensures the legacy application always runs with administrative privileges, even for standard users, by triggering a credential prompt for an administrator account.

Answer

Disable User Account Control (UAC) in the Control Panel

Answer

Add the user to the local Administrators group

Answer

Use the 'Run as different user' option from the Shift+right-click menu

Question 3

During a corporate device deployment, a technician configures an iPhone for a new employee. The employee later reports that they cannot receive emails on the native Mail app, but can access the webmail interface in Safari. What is the most likely misconfiguration?

Accepted Answer

The incoming mail server settings are incorrect.. The user can access webmail via Safari but cannot receive emails in the native Mail app. This indicates the email account credentials are valid and the network connection is working, but the incoming mail server (POP3/IMAP) settings are misconfigured. Incorrect incoming server hostname, port, or SSL/TLS settings would prevent the Mail app from downloading new messages while leaving webmail unaffected.

Answer

The email account password was entered incorrectly.

Answer

The outgoing mail server (SMTP) settings are wrong.

Answer

The device's date and time are set incorrectly.

Question 4

A small business owner reports that after upgrading their wireless router to a newer model, several older laptops running Windows 7 can no longer connect to the Wi-Fi network. The new router is configured to use WPA3. What is the most likely reason for the connection failures?

Accepted Answer

The laptops have outdated wireless drivers that do not support WPA3.. WPA3 is a newer security protocol that requires both the router and the client device to support it. Older laptops running Windows 7 typically have wireless network adapters and drivers that were designed before WPA3 was standardized (2018), so they only support WPA2 or earlier protocols. Without updated drivers that include WPA3 support, these laptops cannot authenticate with the router, causing the connection failures.

Answer

The router's firewall is blocking the older laptops' MAC addresses.

Answer

The laptops are using an incompatible encryption cipher like TKIP.

Answer

The router's SSID is hidden, and the laptops cannot discover it.

Question 5

A user's iPhone 13 suddenly shows a black screen with a spinning gear icon after an iOS update. The device does not respond to touch or button presses. What is the most likely cause and the correct first step?

Accepted Answer

Force restart the iPhone by pressing and releasing Volume Up, then Volume Down, then holding the Side button until the Apple logo appears.. The black screen with a spinning gear icon after an iOS update indicates the device is stuck in a boot loop or update process, not a hardware failure. A force restart (Volume Up, Volume Down, hold Side button) is the correct first step because it forces the iPhone to reboot without erasing data, often resolving temporary software hangs. This sequence is specific to iPhone 7 and later models, including the iPhone 13, and bypasses unresponsive touch or button inputs.

Answer

The battery is dead; connect to a charger and wait.

Answer

Place the device in DFU mode and restore via Finder.

Answer

The screen is damaged; replace the display assembly.

Question 6

A technician is troubleshooting a Windows 10 system that fails to boot with a 'Bootmgr is missing' error. They need to repair the boot configuration data (BCD) from the Windows Recovery Environment. Which command should they use?

Accepted Answer

bootrec /rebuildbcd. The 'Bootmgr is missing' error indicates that the Boot Configuration Data (BCD) store is corrupted or missing. The `bootrec /rebuildbcd` command scans all disks for Windows installations and allows you to rebuild the BCD store from scratch, which directly resolves this issue. In contrast, `bootrec /fixmbr` and `bootrec /fixboot` repair the master boot record and boot sector, respectively, but do not rebuild the BCD store.

Answer

bootrec /fixmbr

Answer

bootrec /fixboot

Answer

sfc /scannow

Question 7

A user reports that they cannot execute a custom shell script they created in their home directory. The script is owned by the user and has permissions set to 644. Which command should be used to allow the owner to execute the script?

Accepted Answer

chmod u+x script.sh. The script has permissions 644, which means the owner has read/write (6) but not execute. To allow the owner to execute the script, you need to add the execute permission for the owner. The command `chmod u+x script.sh` adds execute permission for the user (owner) only, which is the correct and minimal change to resolve the issue.

Answer

chmod 755 script.sh

Answer

chmod 644 script.sh

Answer

chown user:user script.sh

Question 8

A user's laptop running Windows 10 Pro connects to the corporate Wi-Fi but cannot access internal resources. The network uses WPA2-Enterprise with PEAP-MSCHAPv2. The laptop's wireless profile is configured correctly. Other users in the same office can access resources. What is the most likely cause?

Accepted Answer

The user's domain account is locked or the password has expired.. The user can connect to Wi-Fi but cannot access internal resources, and other users are unaffected. Since the wireless profile is correct and WPA2-Enterprise uses PEAP-MSCHAPv2 for authentication, the most likely cause is that the user's domain account is locked or the password has expired. This would prevent successful authentication against the RADIUS server, blocking access to internal resources even though the client associates with the access point.

Answer

The laptop's wireless adapter is faulty.

Answer

The access point is broadcasting on a congested channel.

Answer

The laptop has an incorrect IP address from DHCP.

Question 9

A technician is decommissioning a server that contained encrypted patient health records. The organization's policy requires data to be destroyed beyond recovery, but the server must be returned to the leasing company. Which method should the technician use?

Accepted Answer

Remove the hard drives and physically shred them, then return the server without drives.. Physically shredding the hard drives ensures the encrypted patient health records are destroyed beyond any possible recovery, which satisfies the organization's policy. Returning the server without drives complies with the leasing company's requirement to return the server chassis, as the drives are typically owned by the organization or can be removed per lease terms. This method is the only one that guarantees data destruction at the physical media level, bypassing any residual data on the encrypted drives.

Answer

Perform a full format of all drives.

Answer

Use a degausser on the entire server chassis.

Answer

Run a disk cleanup and delete all files.

Question 10

A technician is replacing the thermal paste on a CPU. After cleaning the old paste, the technician accidentally touches the CPU contacts with bare fingers. What is the primary concern?

Accepted Answer

The CPU contacts may become contaminated with oils from the skin.. Touching the CPU contacts with bare fingers transfers natural oils and contaminants from the skin onto the gold-plated contact pads. These oils can cause corrosion over time or create an insulating layer that impedes proper electrical connectivity, leading to intermittent failures or permanent damage. The primary concern is contamination, not ESD, overheating, or physical pressure.

Answer

The CPU may be damaged by electrostatic discharge (ESD).

Answer

The CPU may overheat due to improper thermal paste application.

Answer

The CPU may be physically damaged by the pressure of the touch.

Question 11

A technician is installing a new UPS (Uninterruptible Power Supply) in a server rack. The UPS is heavy and must be mounted securely. What is the most important safety consideration during installation?

Accepted Answer

Use a lifting team or mechanical lift to position the UPS.. The UPS is a heavy piece of equipment, and improper lifting can cause serious injury or damage. Using a lifting team or mechanical lift ensures safe handling and prevents back strain, crush injuries, or dropping the unit, which is the primary safety concern during physical installation.

Answer

Ensure the UPS is connected to a grounded outlet before mounting.

Answer

Verify that the UPS batteries are charged before installation.

Answer

Install the UPS at the top of the rack for better airflow.

Question 12

During a printer toner replacement, a technician accidentally spills toner powder on the carpet. What is the correct procedure for cleaning up the spill?

Accepted Answer

Use a toner-rated vacuum or a damp cloth to carefully collect the spill.. Toner powder is a fine, electrically charged plastic dust that can be hazardous if inhaled or if it melts into carpet fibers. Using a toner-rated vacuum with a HEPA filter safely captures the particles without dispersing them, or a damp cloth can be used to gently lift the toner without smearing it deeper into the carpet. This procedure follows manufacturer safety guidelines and prevents damage to standard vacuums, which can ignite or spread the toner.

Answer

Use a standard household vacuum cleaner to quickly remove the toner.

Answer

Wipe up the toner with a dry paper towel and dispose of it in the trash.

Answer

Pour water on the spill to dissolve the toner, then mop it up.

Question 13

A user reports that after a recent Windows update, their laptop takes significantly longer to boot and they see a message about 'Preparing Automatic Repair' before the login screen appears. You need to access the advanced startup options to disable automatic restart on system failure. Which tool or feature should you use to boot into the Windows Recovery Environment (WinRE) from a running system?

Accepted Answer

Hold the Shift key while clicking Restart from the Start menu power options.. Holding the Shift key while clicking Restart forces the system to boot directly into the Windows Recovery Environment (WinRE) without needing installation media. This method leverages the built-in boot configuration data (BCD) to load the recovery tools, including the option to disable automatic restart on system failure under advanced startup settings.

Answer

Boot from a Windows installation USB and select 'Repair your computer'.

Answer

Press F8 repeatedly during boot to access advanced boot options.

Answer

Open the System Configuration tool (msconfig) and set the boot to 'Safe Mode' under the Boot tab.

Question 14

A technician is assisting a user who is visibly upset because their critical presentation file was deleted accidentally. The user is speaking loudly and interrupting. What is the best way to handle this situation professionally?

Accepted Answer

Listen without interrupting, then say, "I can see this is urgent. Let's check the Recycle Bin first, and if it's not there, we have backups.". It demonstrates active listening and empathy while immediately addressing the technical issue. The technician first allows the user to vent without interruption, then acknowledges the urgency and proposes a clear, step-by-step recovery plan starting with the Recycle Bin (a common first-resort recovery method) and escalating to backups if needed. This approach de-escalates the emotional situation while efficiently moving toward a solution, which is key for professional customer service in IT support.

Answer

Politely ask the user to calm down and speak more quietly so you can understand the issue.

Answer

Interrupt the user to explain that files can often be recovered from the Recycle Bin or backup.

Answer

Transfer the user to a supervisor because the user is being difficult.

Question 15

A technician is tasked with deploying 50 Android tablets for a field sales team. The tablets need to have a consistent set of apps, settings, and security policies. The technician wants to avoid manually configuring each device. Which Android feature should the technician use?

Accepted Answer

Android Enterprise (Zero-Touch Enrollment). Android Enterprise Zero-Touch Enrollment allows IT administrators to provision devices automatically by associating them with a management provider (e.g., Samsung Knox, VMware Workspace ONE) via the manufacturer's portal. When the tablets are powered on and connected to Wi-Fi, they download a policy that enforces apps, settings, and security configurations without any manual intervention. This is the correct solution for deploying 50 tablets consistently.

Answer

Samsung DeX

Answer

Google Backup

Answer

Developer Options > OEM Unlocking

Question 16

A user reports that their iPhone's flashlight is not working, and the camera app shows a black screen. Other apps function normally. The device is up-to-date and has been restarted. What is the most likely hardware-related issue?

Accepted Answer

The camera module or its flex cable is damaged.. The simultaneous failure of the flashlight and camera strongly points to a shared hardware component failure. Both the camera module and the LED flash are typically integrated on the same flex cable assembly or share a common power management IC. Since other apps function normally and the device has been restarted, a hardware fault in the camera module or its flex cable is the most likely cause.

Answer

The battery is failing and cannot provide enough power.

Answer

The camera app is corrupted; reinstall it.

Answer

The iOS has a bug that affects the camera and flashlight.

Question 17

A technician is deploying a new application to 20 sales laptops. The change management plan requires a pilot test on 2 laptops before full deployment. After testing, the technician finds the application works but conflicts with the VPN client. What should the technician do?

Accepted Answer

Document the conflict and submit a revised change request with a resolution plan.. The change management process requires that any issues discovered during pilot testing be formally documented and addressed before full deployment. Since the application conflicts with the VPN client, the technician must submit a revised change request that includes a resolution plan (e.g., updating the application, modifying VPN configuration, or scheduling a coordinated deployment). This ensures compliance with organizational change control policies and minimizes risk to production systems.

Answer

Deploy the application to all laptops and disable the VPN client on each.

Answer

Continue with the deployment and note the conflict in the change log.

Answer

Uninstall the VPN client from all laptops and reinstall after the deployment.

Question 18

A help desk technician receives a complaint that a user’s custom software application stopped working after a Windows update was installed automatically overnight. The technician checks the system and finds the update is not in the approved change log. What should the technician do next?

Accepted Answer

Roll back the Windows update and document the incident. The update was installed without authorization (not in the approved change log), violating change management policy. The technician should immediately roll back the update to restore application functionality and then document the incident to ensure proper change control procedures are followed. This aligns with the CompTIA A+ change management process: identify the unauthorized change, reverse it, and report it.

Answer

Reinstall the custom application immediately

Answer

Leave the update in place and submit a new change request for the application

Answer

Disable Windows Update on the workstation permanently

Question 19

A technician is deploying a new accounting software package across the company. The finance manager requests that the software be installed on their personal laptop, which is not company-managed. Company policy prohibits installing unapproved software on personal devices. How should the technician respond?

Accepted Answer

"I'm sorry, but company policy doesn't allow installing this software on personal devices. However, I can help you set up remote access to a company workstation that has it.". It upholds the company's security policy by refusing to install unapproved software on a non-managed device, while still providing a practical solution: setting up remote access (e.g., via VPN and Remote Desktop Protocol) to a company workstation that already has the accounting software. This approach ensures compliance with policy and maintains data security by keeping the software within the managed environment.

Answer

"I can install it, but you'll have to sign a waiver accepting all risks."

Answer

"That's against policy. Please use a company laptop."

Answer

"I'll need to get approval from IT management first. Can you email the request?"

Question 20

A junior admin needs to list all files in the current directory, including hidden files, with detailed information such as permissions, owner, and size. Which command should they use?

Accepted Answer

ls -la. The `ls -la` command combines the `-l` (long format) and `-a` (all files, including hidden ones) options. This fulfills the requirement to list all files in the current directory, including hidden files (those starting with a dot), with detailed information such as permissions, owner, group, size, and modification time.

Answer

ls -l

Answer

ls -a

Answer

ll