- A
The access point's firmware is outdated, causing packet loss.
Why wrong: Incorrect. Firmware issues would affect all traffic, not specifically certificate validation.
- B
The RADIUS server's certificate has expired.
Why wrong: Incorrect. If the server certificate were expired, all clients would fail authentication, not just some.
- C
Client devices have expired or untrusted certificates.
Correct. Expired client certificates cause intermittent authentication failures, leading to disconnects and reconnects.
- D
The wireless channel is overlapping with neighboring networks.
Why wrong: Incorrect. Channel overlap causes slow speeds and interference, not certificate validation errors.
Troubleshooting EAP-TLS Certificate Validation Failures in WPA2-Enterprise
This 220-1202 practice question tests your understanding of wireless security protocols. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A technician is troubleshooting a wireless network where users report intermittent connectivity and slow speeds. The network uses WPA2-Enterprise with EAP-TLS and certificate-based authentication. The technician notices that the RADIUS server logs show frequent certificate validation failures. What is the most likely root cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"most likely"Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Quick Answer
The answer is client devices have expired or untrusted certificates. EAP-TLS in WPA2-Enterprise requires mutual certificate-based authentication, meaning both the RADIUS server and the client must present valid, trusted certificates. When client certificates expire or are not trusted by the server, the handshake fails, causing the intermittent connectivity and slow speeds as clients repeatedly attempt reauthentication. On the CompTIA A+ Core 2 220-1202 exam, this scenario tests your understanding of certificate lifecycle management in enterprise wireless security; a common trap is assuming the issue lies with the server certificate or a simple password mismatch, since EAP-TLS uses certificates, not shared secrets. Remember the key distinction: EAP-TLS is certificate-driven on both ends, so expired client certs break the chain. Memory tip: "TLS = Two-sided trust; if either side's cert is toast, the connection is lost."
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Client devices have expired or untrusted certificates.
The RADIUS server logs show frequent certificate validation failures, which directly points to an issue with the certificates presented by the clients during EAP-TLS authentication. In WPA2-Enterprise with EAP-TLS, both the server and client must present valid certificates; if client certificates are expired or untrusted, the RADIUS server will reject the authentication, causing intermittent connectivity and slow speeds as clients fail to re-authenticate or roam.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
The access point's firmware is outdated, causing packet loss.
Why it's wrong here
Incorrect. Firmware issues would affect all traffic, not specifically certificate validation.
- ✗
The RADIUS server's certificate has expired.
Why it's wrong here
Incorrect. If the server certificate were expired, all clients would fail authentication, not just some.
- ✓
Client devices have expired or untrusted certificates.
Why this is correct
Correct. Expired client certificates cause intermittent authentication failures, leading to disconnects and reconnects.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The wireless channel is overlapping with neighboring networks.
Why it's wrong here
Incorrect. Channel overlap causes slow speeds and interference, not certificate validation errors.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Cisco often tests the distinction between server-side and client-side certificate issues; the trap here is that candidates may assume the RADIUS server's certificate is the problem (Option B) because it is the central authentication point, but the logs specifically show 'validation failures' which in EAP-TLS typically refer to the client certificate failing validation by the server.
Detailed technical explanation
How to think about this question
EAP-TLS requires mutual certificate authentication: the RADIUS server validates the client certificate against a trusted CA, and the client validates the server certificate. If a client certificate is expired or issued by an untrusted CA, the RADIUS server will log an authentication failure with a reason code like 'certificate validation failed' (RFC 5216). In real-world deployments, this often happens when client certificates are not renewed before expiry or when a new CA is deployed without updating trust stores on clients.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A network engineer at a university connects two campus buildings via a fibre link. Both routers run OSPF, but no adjacency forms — even though both routers can ping each other. The engineer finds one router is in area 0 and the other in area 1. OSPF adjacency requires matching area numbers, hello/dead timers, and network type. IP reachability alone is not enough.
Quick reference
AAA Protocol Comparison
| Protocol | Port(s) | Encryption | Transport | Primary Use |
|---|---|---|---|---|
| RADIUS | 1812 / 1813 | Password only | UDP | Network access control |
| TACACS+ | 49 | Full packet | TCP | Device administration |
| Diameter | 3868 | Full session | TCP / SCTP | Carrier / mobile networks |
| 802.1X | — | EAP-based | Layer 2 | Port-based access control |
TACACS+ encrypts the entire packet; RADIUS only encrypts the password field — a key exam distinction.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Wireless Security Protocols — study guide chapter
Learn the concepts, then practise the questions
- →
Wireless Security Protocols practice questions
Targeted practice on this topic area only
- →
All 220-1202 questions
750 questions across all exam domains
- →
CompTIA A+ Core 2 220-1202 study guide
Full concept coverage aligned to exam objectives
- →
220-1202 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 220-1202 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Windows OS Features and Tools practice questions
Practise 220-1202 questions linked to Windows OS Features and Tools.
Windows Settings and Control Panel practice questions
Practise 220-1202 questions linked to Windows Settings and Control Panel.
Windows Command-Line Tools practice questions
Practise 220-1202 questions linked to Windows Command-Line Tools.
Windows Administrative Tools practice questions
Practise 220-1202 questions linked to Windows Administrative Tools.
macOS Features and Tools practice questions
Practise 220-1202 questions linked to macOS Features and Tools.
Linux Commands and File Permissions practice questions
Practise 220-1202 questions linked to Linux Commands and File Permissions.
Mobile OS Features and Tools practice questions
Practise 220-1202 questions linked to Mobile OS Features and Tools.
Virtualization and Cloud Technologies practice questions
Practise 220-1202 questions linked to Virtualization and Cloud Technologies.
Physical Security Controls practice questions
Practise 220-1202 questions linked to Physical Security Controls.
Logical Security Concepts practice questions
Practise 220-1202 questions linked to Logical Security Concepts.
Wireless Security Protocols practice questions
Practise 220-1202 questions linked to Wireless Security Protocols.
Malware Types and Removal practice questions
Practise 220-1202 questions linked to Malware Types and Removal.
Practice this exam
Start a free 220-1202 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 220-1202 question test?
Wireless Security Protocols — This question tests Wireless Security Protocols — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Client devices have expired or untrusted certificates. — The RADIUS server logs show frequent certificate validation failures, which directly points to an issue with the certificates presented by the clients during EAP-TLS authentication. In WPA2-Enterprise with EAP-TLS, both the server and client must present valid certificates; if client certificates are expired or untrusted, the RADIUS server will reject the authentication, causing intermittent connectivity and slow speeds as clients fail to re-authenticate or roam.
What should I do if I get this 220-1202 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 220-1202 practice questions
- During a Windows 10 deployment, you need to ensure that a specific Group Policy setting is applied to a computer before…
- After installing a new printer driver, a user's Windows 11 computer crashes with a blue screen error every time they try…
- A user reports that their Windows 10 computer is infected with a virus that keeps reinstalling itself after removal. Wha…
- A customer reports that their Windows 10 laptop is displaying pop-up ads even when no browser is open. They suspect a ma…
- A technician is configuring a new Windows 10 workstation for a user who handles sensitive financial data. The company po…
- A technician is responding to a security incident where an employee's credentials were used to access a server without a…
Last reviewed: Jul 4, 2026
This 220-1202 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1202 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.