- A
A) DNS configuration
Correct. DNS resolves domain names to IP addresses; if DNS is misconfigured, the user can reach IP addresses but not domain names. Since the gateway is reachable, DNS is the most likely next check.
- B
B) DHCP server
Why wrong: The user already has an IP address (192.168.1.100), so the DHCP server is functioning. This is not the issue.
- C
C) Router's firewall ACLs
Why wrong: While firewall ACLs could block internet traffic, the user can ping the gateway, so layer 3 connectivity exists. DNS is a more common cause and should be checked first.
- D
D) Switch port VLAN assignment
Why wrong: If the VLAN were incorrect, the user would likely not have local connectivity. Since local resources are accessible, VLAN assignment is not the issue.
Quick Answer
The correct next step is to check the DNS configuration. Because the user can ping the gateway and access local resources, Layer 2 and Layer 3 connectivity on the local network is verified, meaning the issue is not with IP addressing or routing. The inability to reach the internet while local access works points directly to a name resolution failure—the browser cannot translate domain names to IP addresses without a properly configured DNS server. On the CompTIA Network+ N10-009 exam, this scenario tests your ability to isolate network layers: a successful gateway ping rules out physical, data link, and network layer problems, leaving the application layer (DNS) as the prime suspect. A common trap is to immediately check the DHCP lease or default gateway again, but since the gateway is reachable, DNS is the logical next step. Memory tip: if you can ping IPs but not names, think “DNS is the missing link.”
N10-009 Network Troubleshooting Practice Question
This N10-009 practice question tests your understanding of network troubleshooting. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
After replacing a faulty network cable, a user reports that they can access local resources but not the internet. The technician verifies that the user's IP address is 192.168.1.100 with a subnet mask of 255.255.255.0 and a default gateway of 192.168.1.1. The technician can ping the default gateway successfully. Which of the following should the technician check NEXT?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
A) DNS configuration
The user can access local resources and successfully ping the default gateway, which confirms that Layer 2 and Layer 3 connectivity to the local network is working. The inability to access the internet while local access works points to a name resolution failure, as the browser relies on DNS to translate domain names to IP addresses. Checking DNS configuration is the logical next step because a misconfigured or missing DNS server would prevent internet access even when IP connectivity is intact.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
A) DNS configuration
- ✗
B) DHCP server
Why it's wrong here
The user already has an IP address (192.168.1.100), so the DHCP server is functioning. This is not the issue.
- ✗
C) Router's firewall ACLs
- ✗
D) Switch port VLAN assignment
Why it's wrong here
If the VLAN were incorrect, the user would likely not have local connectivity. Since local resources are accessible, VLAN assignment is not the issue.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates assume internet access failure must be a gateway or routing issue, but the successful ping to the default gateway proves Layer 3 connectivity is fine, forcing the focus to DNS as the most common cause of 'can't browse but can ping local.'
Detailed technical explanation
How to think about this question
DNS resolution uses UDP port 53 by default, and a misconfigured DNS server (e.g., pointing to an internal-only server or an unreachable public resolver) will cause 'Name Not Resolved' errors even when IP connectivity is perfect. The `nslookup` or `dig` command can quickly verify DNS functionality; if the user can ping an external IP like 8.8.8.8 but not a domain name, DNS is the culprit. In real-world scenarios, a faulty cable replacement might have jostled the NIC settings or the DHCP lease renewal could have cleared a manually set DNS server, leading to this exact symptom.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Network Troubleshooting — study guide chapter
Learn the concepts, then practise the questions
- →
Network Troubleshooting practice questions
Targeted practice on this topic area only
- →
All N10-009 questions
520 questions across all exam domains
- →
CompTIA Network+ N10-009 study guide
Full concept coverage aligned to exam objectives
- →
N10-009 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related N10-009 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Networking Concepts practice questions
Practise N10-009 questions linked to Networking Concepts.
Network Implementation practice questions
Practise N10-009 questions linked to Network Implementation.
Network Operations practice questions
Practise N10-009 questions linked to Network Operations.
Network Security practice questions
Practise N10-009 questions linked to Network Security.
Network Troubleshooting practice questions
Practise N10-009 questions linked to Network Troubleshooting.
Network+ network fundamentals practice questions
Practise N10-009 questions linked to Network+ network fundamentals.
Practice this exam
Start a free N10-009 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this N10-009 question test?
Network Troubleshooting — This question tests Network Troubleshooting — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: A) DNS configuration — The user can access local resources and successfully ping the default gateway, which confirms that Layer 2 and Layer 3 connectivity to the local network is working. The inability to access the internet while local access works points to a name resolution failure, as the browser relies on DNS to translate domain names to IP addresses. Checking DNS configuration is the logical next step because a misconfigured or missing DNS server would prevent internet access even when IP connectivity is intact.
What should I do if I get this N10-009 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More N10-009 practice questions
- Which layer of the OSI model is responsible for logical addressing and routing of packets between networks?
- Users in VLAN 10 cannot obtain IP addresses from a DHCP server located in VLAN 20. The router has an ip helper-address c…
- Which of the following is a characteristic of a Layer 2 network switch?
- Which of the following network devices operates primarily at Layer 2 of the OSI model and uses MAC addresses to forward…
- Which of the following is a characteristic of UDP when compared to TCP?
- Which of the following IPv6 addresses is a valid link-local address?
Last reviewed: Jun 11, 2026
This N10-009 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the N10-009 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.