Question 176 of 750
Logical Security ConceptsmediumMultiple ChoiceObjective-mapped

Quick Answer

The correct combination is WPA3 with AES encryption and MAC address filtering. This works because WPA3 with AES provides the strongest available encryption for wireless data, ensuring confidentiality and integrity of transmitted information, while MAC address filtering acts as an access control list to restrict network association to only pre-approved devices. On the CompTIA A+ Core 2 220-1202 exam, this scenario tests your understanding of layered security—encryption protects data in transit, and filtering restricts physical access—and a common trap is choosing WEP or WPA-TKIP, which are deprecated and insecure. Remember that WPA3 is the current standard, AES is the mandatory cipher, and MAC filtering is an additional, not primary, control. A useful memory tip: "WPA3 + AES = encryption; MAC filter = who gets in."

220-1202 Logical Security Concepts Practice Question

This 220-1202 practice question tests your understanding of logical security concepts. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A technician is setting up a new wireless network for a small office. They want to ensure that only company-issued devices can connect, and that data transmitted over the air is encrypted. Which combination of settings should they use?

Question 1mediummultiple choice
Read the full wireless explanation →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

WPA3 with AES encryption and MAC address filtering.

WPA2 or WPA3 with AES encryption provides strong wireless security. MAC address filtering can be added as an extra layer to restrict which devices can associate. This combination meets both requirements of encryption and device restriction.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • WPA2 with TKIP encryption and SSID broadcast disabled.

    Why it's wrong here

    TKIP is outdated and insecure; hiding SSID does not prevent determined attackers from discovering the network.

  • WPA3 with AES encryption and MAC address filtering.

    Why this is correct

    WPA3 with AES provides strong encryption, and MAC filtering restricts access to approved devices.

    Related concept

    CIDR notation defines the prefix length.

  • WEP with 128-bit key and a strong password.

    Why it's wrong here

    WEP is easily cracked and provides inadequate security regardless of key length.

  • Open network with a captive portal requiring employee login.

    Why it's wrong here

    Open networks have no encryption; a captive portal only authenticates users but data is transmitted in plaintext.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

  • CIDR notation defines the prefix length.
  • Block size helps identify subnet boundaries.
  • Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
  • The required host count determines the smallest suitable subnet.

TExam Day Tips

  • Write the block size before choosing the subnet.
  • Check whether the question asks for hosts, subnets or a specific address range.
  • Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 220-1202 subnetting questions on CIDR, address ranges, and subnet selection.

Related practice questions

Related 220-1202 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 220-1202 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 220-1202 question test?

Logical Security Concepts — This question tests Logical Security Concepts — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: WPA3 with AES encryption and MAC address filtering. — WPA2 or WPA3 with AES encryption provides strong wireless security. MAC address filtering can be added as an extra layer to restrict which devices can associate. This combination meets both requirements of encryption and device restriction.

What should I do if I get this 220-1202 question wrong?

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 220-1202 subnetting questions on CIDR, address ranges, and subnet selection.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 19, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 220-1202 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1202 exam.