Question 174 of 750
Environmental Awareness and ImpactmediumMultiple ChoiceObjective-mapped

Quick Answer

The correct answer is to contact a licensed e-waste recycler for proper disposal. This is required because CRT monitors contain leaded glass and phosphors, making them hazardous e-waste that cannot be thrown into a dumpster under CRT monitor disposal regulations. On the CompTIA A+ Core 2 220-1202 exam, this scenario tests your understanding of environmental handling procedures and legal compliance, often appearing as a trap where the office manager’s request seems convenient but violates local hazardous waste laws. A common trick is to confuse “recycling” with “trash pickup” or to assume a monitor is safe once unplugged. Remember the memory tip: “CRT = Cathode Ray Tube = Contains Lead and Toxic Stuff,” so always route them to a certified recycler, not a dumpster.

220-1202 Environmental Awareness and Impact Practice Question

This 220-1202 practice question tests your understanding of environmental awareness and impact. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A small office has several old CRT monitors that need to be replaced. The office manager asks the technician to simply place them in the dumpster. What should the technician do?

Question 1mediummultiple choice
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Contact a licensed e-waste recycler to pick up the monitors for proper disposal.

CRT monitors contain leaded glass and other hazardous materials, making them regulated e-waste. The technician must follow local hazardous waste disposal laws and arrange for proper recycling or disposal through a certified e-waste facility.

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Comply with the manager's request to avoid conflict.

    Why it's wrong here

    Disposing of CRTs in a dumpster is illegal in many areas due to hazardous content. The technician has a professional and legal responsibility to follow environmental regulations.

  • Break the monitors down to salvage the copper, then discard the glass.

    Why it's wrong here

    Breaking CRTs releases lead dust and other toxins, creating a health hazard. This is not safe or compliant.

  • Contact a licensed e-waste recycler to pick up the monitors for proper disposal.

    Why this is correct

    This is the correct procedure. Licensed recyclers handle hazardous materials safely and ensure compliance with environmental laws.

    Related concept

    Static NAT maps one inside address to one outside address.

  • Donate the monitors to a local school.

    Why it's wrong here

    Donation passes the disposal problem to someone else and may still require eventual proper disposal. Many schools no longer accept CRTs due to their weight and toxicity.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 220-1202 NAT questions on configuration and troubleshooting.

Related practice questions

Related 220-1202 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 220-1202 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 220-1202 question test?

Environmental Awareness and Impact — This question tests Environmental Awareness and Impact — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: Contact a licensed e-waste recycler to pick up the monitors for proper disposal. — CRT monitors contain leaded glass and other hazardous materials, making them regulated e-waste. The technician must follow local hazardous waste disposal laws and arrange for proper recycling or disposal through a certified e-waste facility.

What should I do if I get this 220-1202 question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 220-1202 NAT questions on configuration and troubleshooting.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 20, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 220-1202 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1202 exam.