100-140 Practice Question: A network administrator is upgrading the Cisco IOS image on a Cisco 4331 Integrated…
A network administrator is upgrading the Cisco IOS image on a Cisco 4331 Integrated Services Router. The router currently has 4 GB of flash memory and the new image is 3.5 GB. The administrator attempts to copy the new image to flash but receives an 'insufficient space' error. What is the most likely reason?
⚠ Common exam trap
The trap here is assuming that the total flash size is the same as available space, ignoring existing files.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The existing IOS image and other files occupy space, leaving less than 3.5 GB free.
The 'insufficient space' error occurs because the flash memory already contains the current IOS image and possibly other files, leaving less than 3.5 GB free. Even though the flash is 4 GB, the available space is insufficient. The administrator should delete old files or use a larger flash card before copying the new image.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
The router requires a reboot before accepting a new IOS image.
Why it's wrong here
Copying a new image to flash does not require a reboot. The normal order is to copy the image, verify it, point the boot variable at it, save, and only then reload to run it. A reboot would not free any space either, because the files in flash stay there. The error message is about capacity, so the answer lies in what already occupies the flash.
- ✗
The new IOS image is corrupted and cannot be written to flash.
Why it's wrong here
A corrupted image fails integrity checks, for example 'verify /md5' returning a different hash or a signature check failing, rather than producing an 'insufficient space' error. The copy would complete, or abort on transfer errors, but the device would not report a lack of space. Checking free space with 'dir flash:' is the right first step, then verifying the image's hash after copying.
- ✗
The flash memory is faulty and needs replacement.
Why it's wrong here
A failing flash device usually produces read and write errors, file system errors, or is not recognised at boot, rather than a clean 'insufficient space' message. The error describes exactly what you would expect when free space is smaller than the file being copied. 'dir flash:' shows total and free bytes; the existing image and other files account for the shortfall.
- ✓
The existing IOS image and other files occupy space, leaving less than 3.5 GB free.
Why this is correct
Flash holds the running image and other files, such as older images, packages, crash information and logs, so the free space is far less than the 4 GB total. Check with 'dir flash:', then remove files that are no longer needed with 'delete' (keeping the current image until the new one is verified), or on IOS XE in install mode use 'install remove inactive'. Then copy, verify and set the boot variable.
About these practice questions
Courseiva writes every 100-140 question from scratch — 305 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
You might also like
Similar 100-140 questions
- Which hardware component in a Cisco switch is primarily responsible for performing high-speed frame switching using ASIC…
- A technician is troubleshooting a Cisco Catalyst 2960 switch that fails to power on. The technician suspects a hardware…
- Which of the following describes the function of the POST (Power-On Self-Test) on a Cisco router?
- When inspecting a Cisco router's internal components, which hardware component provides the initial instructions to the…
- Which TWO of the following hardware components are typically field-replaceable on a Cisco Catalyst 9300 Series switch?
Written and reviewed by Johnson Ajibi, MSc IT Security
Security Systems Architect · founder of Courseiva
Last reviewed September 2026 · checked against the official Cisco exam blueprint
This 100-140 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 100-140 exam.