MB-920 Describe Dynamics 365 Supply Chain Management Practice Test 10 — 15 Questions

Question 1

You are analyzing a master plan configuration. The company complains that the plan does not consider material availability when scheduling production orders. Which setting in the exhibit is causing this?

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

The 'FiniteMaterial' parameter is set to false.. The 'FiniteMaterial' parameter controls whether material availability is considered during master planning. When set to false, the system ignores material constraints and schedules production orders without checking if required materials are available, which directly matches the company's complaint.

Answer

The plan scope is limited to one site.

Answer

The scheduling method is 'Operations scheduling'.

Answer

The 'FiniteCapacity' parameter is set to true.

Question 2

You are reviewing a Power BI report that shows quality order counts by status. The report shows 0 for 'Open' status even though there are open quality orders. What is the most likely reason?

Accepted Answer

The query filters to only orders created in the last 30 days.. The Power BI report likely uses a filter that limits data to the last 30 days. Open quality orders may have been created earlier, so they are excluded from the report, resulting in a count of 0. Option A is wrong because open orders do exist, so the count is not actually zero. Option C is wrong because the 'CreationDate' field exists and is used for filtering. Option D is wrong because the 'Status' field is used in the report to categorize counts, but the filter on creation date is the cause.

Answer

The count of open orders is actually zero.

Answer

The 'CreationDate' field does not exist in the QualityOrders table.

Answer

The 'Status' field is not used in the summarize.

Question 3

You are configuring a landed cost voyage. The company wants to ensure that the goods are tracked as in-transit inventory from the time they leave the port of loading. Which element in the exhibit enables this?

Accepted Answer

GoodsInTransitOrder. The 'GoodsInTransitOrder' field creates a goods-in-transit order that tracks inventory from the port of loading until it is received at the destination. Option A (PortOfLoading and PortOfDischarge) are location fields specifying the voyage route, not inventory tracking. Option B (VoyageId) is a unique identifier for the voyage, not a tracking mechanism. Option C (CostType and Amount) are financial fields for estimated costs, unrelated to in-transit inventory.

Answer

PortOfLoading and PortOfDischarge

Answer

VoyageId

Answer

CostType and Amount

Question 4

A manufacturing company uses Dynamics 365 Supply Chain Management. They need to reduce inventory holding costs by optimizing reorder points. Which feature should they use?

Accepted Answer

Reorder Point Planning. Reorder Point Planning in Master Planning calculates when to replenish inventory based on historical demand and lead times, directly optimizing reorder points to reduce holding costs. Option A is wrong because Vendor Managed Inventory is a supplier collaboration tool, not for internal reorder optimization. Option B is wrong because Inventory Visibility is a real-time inventory service, not a planning tool. Option D is wrong because Demand Forecasting predicts future demand but does not directly set reorder points.

Answer

Vendor Managed Inventory

Answer

Inventory Visibility

Answer

Demand Forecasting

Question 5

A company wants to track products throughout the supply chain using unique identifiers. Which configuration should they enable?

Accepted Answer

Batch Attributes. Batch Attributes allow companies to define unique identifiers (such as lot numbers or batch numbers) and assign them to products, enabling end-to-end traceability through the supply chain. When configured, each batch can be tracked from receipt through production and delivery, providing the visibility needed for recalls and compliance.

Answer

Product Variants

Answer

Global Inventory Tracking

Answer

Catch Weight

Question 6

A distribution company uses Dynamics 365 Supply Chain Management. They notice that transportation costs are high across multiple carriers. Which module should they configure to optimize carrier selection and route planning?

Accepted Answer

Transportation Management. Transportation Management (TMS) provides tools for carrier rate shopping, route planning, and freight optimization. Option A (Master Planning) is wrong because Master Planning handles supply/demand balancing, not carrier selection. Option B (Warehouse Management) is wrong because Warehouse Management focuses on inbound/outbound operations, not transportation. Option D is wrong because Asset Management is for equipment maintenance.

Answer

Master Planning

Answer

Warehouse Management

Answer

Asset Management

Question 7

A food manufacturer uses Dynamics 365 Supply Chain Management. They need to ensure that raw materials are only used if they pass quality inspections. Which process should they implement?

Accepted Answer

Quality Management. D is correct because Dynamics 365 Supply Chain Management’s Quality Management module allows you to define quality orders and inspection criteria that block raw material consumption until the inspection is passed. By configuring item sampling, test instruments, and quality groups, the system ensures that inventory transactions (e.g., production picking) are prevented for materials that have not met the defined quality standards.

Answer

Batch Attributes

Answer

Nonconformance Management

Answer

Inventory Statuses

Question 8

A company wants to use Dynamics 365 Supply Chain Management to manage supplier collaboration for purchase orders. Which portal should they enable?

Accepted Answer

Vendor Collaboration. The Vendor Collaboration portal allows suppliers to view and respond to purchase orders, invoices, and forecasts. Option A (Customer Self-Service) is incorrect because it is designed for customers, not suppliers. Option B (Procurement and Sourcing) is incorrect because it is a module for internal procurement processes and does not provide a supplier self-service portal. Option D (Supplier Portal) is incorrect because although it is a common term, the official name in Dynamics 365 Supply Chain Management is Vendor Collaboration.

Answer

Customer Self-Service

Answer

Procurement and Sourcing

Answer

Supplier Portal

Question 9

A company uses Dynamics 365 Supply Chain Management. They need to calculate a costed bill of materials (BOM) that includes manufacturing overhead. Which costing method should they use?

Accepted Answer

BOM Calculation with Costing Sheet. D is correct because the BOM Calculation with Costing Sheet is specifically designed to calculate a costed bill of materials that includes manufacturing overhead. In Dynamics 365 Supply Chain Management, the costing sheet allows you to define overhead rates, such as machine or labor overhead, and automatically apply them during BOM calculation, ensuring the total cost reflects both material and overhead components.

Answer

Moving Average

Answer

Standard Cost

Answer

FIFO

Question 10

A warehouse receives a shipment and needs to put items away based on their velocity (fast-movers near shipping). Which warehouse strategy should they configure?

Accepted Answer

Directed Put-away. Irected Put-away (Option C). Directed Put-away uses location directives to automatically assign storage locations to incoming items based on criteria such as item velocity, with fast-moving items placed near shipping areas. Replenishment (Option A) is used to move items from bulk storage to picking locations, not for initial put-away. Cycle Counting (Option B) is an inventory accuracy process, not a put-away strategy. Cross-docking (Option D) bypasses put-away entirely by sending items directly from receiving to outbound shipping.

Answer

Replenishment

Answer

Cycle Counting

Answer

Cross-docking

Question 11

A company wants to use Dynamics 365 Supply Chain Management to manage maintenance of production equipment. Which module should they use?

Accepted Answer

Asset Management. Asset Management is the correct module for managing maintenance of production equipment in Dynamics 365 Supply Chain Management. It handles work orders, maintenance schedules, and equipment lifecycle. Option A (Asset Management) is correct. Option B (Quality Management) is for inspections and quality control, not maintenance. Option C (Warehouse Management) focuses on inventory and warehouse operations. Option D (Production Control) manages manufacturing execution and production orders, not equipment maintenance.

Answer

Quality Management

Answer

Warehouse Management

Answer

Production Control

Question 12

A company uses Dynamics 365 Supply Chain Management. They need to support a make-to-order scenario where each order has unique engineering specifications. Which configuration should they use?

Accepted Answer

Engineering Change Management. Engineering Change Management in Dynamics 365 Supply Chain Management is designed to manage product versions, revisions, and engineering specifications, making it suitable for make-to-order scenarios with unique specifications per order. Option B (Product Configuration) is intended for standard configurable products with predefined options, not for completely unique engineering specs. Option C (Batch Orders) is used in process manufacturing for batch-based production. Option D (Sales Orders) is a transaction record and does not handle configuration or engineering details.

Answer

Product Configuration

Answer

Sales Orders

Answer

Batch Orders

Question 13

Which TWO modules are part of Dynamics 365 Supply Chain Management for warehouse operations?

Accepted Answer

Inventory Management. The correct answers are C and E. Inventory Management (C) and Warehouse Management (E) are core modules of Dynamics 365 Supply Chain Management that directly support warehouse operations. Option A, Asset Management, is focused on maintaining equipment and assets, not warehouse operations. Option B, Project Management, handles project-based planning and execution, unrelated to warehousing. Option D, Transportation Management, deals with logistics and freight, which is distinct from in-warehouse operations.

Answer

Asset Management

Answer

Project Management

Answer

Transportation Management

Question 14

Which THREE are features of Dynamics 365 Supply Chain Management for quality control?

Accepted Answer

Nonconformance Management. Nonconformance Management (B) is a core feature of Dynamics 365 Supply Chain Management that allows organizations to document, track, and resolve quality issues such as defective materials or process deviations. It integrates with quality orders and associations to enforce corrective actions and ensure compliance with quality standards.

Answer

Costing Sheets

Answer

Inventory Statuses

Question 15

Which TWO are valid planning methods in Master Planning for Dynamics 365 Supply Chain Management?

Accepted Answer

Reorder Point Planning. Options B and D are correct because Reorder Point Planning and Coverage Planning are the two standard planning methods available in Master Planning for Dynamics 365 Supply Chain Management. Option A is incorrect because Kanban is a lean replenishment method, not a master planning method. Option C is incorrect because Lean Scheduling is a separate scheduling approach, not a master planning method. Option E is incorrect because Material Requirements Planning (MRP) is the overall master planning process, not a specific planning method.

Answer

Kanban

Answer

Lean Scheduling

Answer

Material Requirements Planning (MRP)