- A
Allow all traffic from the internet to the DMZ
Why wrong: This would expose DMZ to unrestricted access.
- B
Disable logging on DMZ firewalls
Why wrong: Logging is critical for incident detection.
- C
Use separate firewall rules for inbound and outbound traffic
Allows strict control over traffic flows.
- D
Place the DMZ behind the internal firewall
Why wrong: DMZ should be separated from internal network by firewalls.
- E
Use the same subnet for DMZ and internal network
Why wrong: This bypasses segmentation.
Question 689 of 1,000
mediumMultiple ChoiceObjective-mapped
SSCP Practice Question: A company implements a DMZ to host public services
This SSCP practice question tests your understanding of a company implements a dmz to host public services. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company implements a DMZ to host public services. Which of the following is the best practice for securing the DMZ?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"best"Why it matters: Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Use separate firewall rules for inbound and outbound traffic
Option C is correct because DMZ security relies on strict separation of inbound and outbound traffic rules. Inbound rules should permit only necessary traffic (e.g., HTTP/HTTPS to web servers) from the internet to the DMZ, while outbound rules should restrict DMZ-initiated connections to the internal network, typically allowing only established sessions or specific protocols. This prevents an attacker who compromises a DMZ host from using it as a pivot to access internal resources.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Allow all traffic from the internet to the DMZ
Why it's wrong here
This would expose DMZ to unrestricted access.
- ✗
Disable logging on DMZ firewalls
Why it's wrong here
Logging is critical for incident detection.
- ✓
Use separate firewall rules for inbound and outbound traffic
Why this is correct
Allows strict control over traffic flows.
Clue confirmation
The clue word "best" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Place the DMZ behind the internal firewall
Why it's wrong here
DMZ should be separated from internal network by firewalls.
- ✗
Use the same subnet for DMZ and internal network
Why it's wrong here
This bypasses segmentation.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often confuse the DMZ's placement (thinking it should be behind the internal firewall for extra protection) with the need for separate rule sets, but the correct placement is between two firewalls (or a single firewall with three interfaces) with distinct inbound and outbound rules to enforce isolation.
Detailed technical explanation
How to think about this question
In practice, DMZ firewalls often implement stateful inspection with separate rule sets for inbound and outbound traffic, where outbound rules may restrict DMZ hosts to only initiate connections to specific internal services (e.g., database servers) on defined ports. A common real-world scenario involves a web server in the DMZ that needs to query an internal SQL database; the outbound rule should permit only that specific traffic, not general outbound access. This aligns with the principle of least privilege and is often enforced using access control lists (ACLs) that explicitly deny all traffic not matching allowed flows.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A security analyst at a medium-sized enterprise encounters this scenario during an investigation or architecture review. The correct answer reflects best practice for the specific threat or control described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Security exam questions test whether you can match controls to threats in context — not just recall definitions.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Related practice questions
Related SSCP practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Access Controls practice questions
Practise SSCP questions linked to Access Controls.
Risk Identification, Monitoring, and Analysis practice questions
Practise SSCP questions linked to Risk Identification, Monitoring, and Analysis.
Incident Response and Recovery practice questions
Practise SSCP questions linked to Incident Response and Recovery.
Security Operations and Administration practice questions
Practise SSCP questions linked to Security Operations and Administration.
Cryptography practice questions
Practise SSCP questions linked to Cryptography.
Network and Communications Security practice questions
Practise SSCP questions linked to Network and Communications Security.
Systems and Application Security practice questions
Practise SSCP questions linked to Systems and Application Security.
Risk Identification, Monitoring and Analysis practice questions
Practise SSCP questions linked to Risk Identification, Monitoring and Analysis.
SSCP fundamentals practice questions
Practise SSCP questions linked to SSCP fundamentals.
SSCP scenario practice questions
Practise SSCP questions linked to SSCP scenario.
SSCP troubleshooting practice questions
Practise SSCP questions linked to SSCP troubleshooting.
Practice this exam
Start a free SSCP practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this SSCP question test?
Read the scenario before looking for a memorised answer.
What is the correct answer to this question?
The correct answer is: Use separate firewall rules for inbound and outbound traffic — Option C is correct because DMZ security relies on strict separation of inbound and outbound traffic rules. Inbound rules should permit only necessary traffic (e.g., HTTP/HTTPS to web servers) from the internet to the DMZ, while outbound rules should restrict DMZ-initiated connections to the internal network, typically allowing only established sessions or specific protocols. This prevents an attacker who compromises a DMZ host from using it as a pivot to access internal resources.
What should I do if I get this SSCP question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Are there clue words in this question I should notice?
Yes — watch for: "best". Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More SSCP practice questions
- A company has implemented a new vulnerability scanner and the first scan reports 200 vulnerabilities. The security team…
- A security analyst is reviewing logs and notices multiple failed login attempts from a single IP address against an admi…
- A security manager is evaluating log sources for a SIEM implementation. Which THREE of the following are considered log…
- A vulnerability scanner reports a medium-severity finding on a server. After investigation, the security team determines…
- During a qualitative risk analysis, an organization rates the likelihood of a flood as 'Low' and the impact as 'High'. U…
- A security analyst is tuning a SIEM to reduce false positives. Which of the following actions is most likely to reduce f…
Last reviewed: Jun 25, 2026
This SSCP practice question is part of Courseiva's free ISC2 certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SSCP exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.