- A
ARP spoofing
Why wrong: ARP spoofing involves sending fake ARP messages to associate a MAC address with an IP address, not ICMP broadcasts.
- B
MAC flooding
Why wrong: MAC flooding overwhelms a switch's CAM table with fake MAC addresses, causing it to flood traffic.
- C
Smurf attack
A Smurf attack uses ICMP echo requests to a broadcast address to create a denial-of-service via amplification.
- D
DNS amplification
Why wrong: DNS amplification uses small queries to generate large responses, but it targets DNS servers, not broadcast addresses.
Question 475 of 520
N10-009 Network Security Practice Question
This N10-009 practice question tests your understanding of network security. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A network administrator notices that a large number of ICMP echo request packets are being sent to the broadcast address of the network from a single host. This is causing performance degradation. Which type of attack is this?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Smurf attack
The smurf attack exploits ICMP by sending echo request packets to a network's broadcast address with a spoofed source IP of the victim. All hosts on the network then reply to the victim, overwhelming it with traffic and causing performance degradation. This matches the scenario of a single host sending ICMP echo requests to the broadcast address.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
ARP spoofing
Why it's wrong here
ARP spoofing involves sending fake ARP messages to associate a MAC address with an IP address, not ICMP broadcasts.
When this WOULD be correct
A network administrator notices that traffic intended for a legitimate server is being redirected to an attacker's machine, causing data interception. Which attack is this?
- ✗
MAC flooding
Why it's wrong here
MAC flooding overwhelms a switch's CAM table with fake MAC addresses, causing it to flood traffic.
When this WOULD be correct
A network administrator notices that the switch is flooding frames to all ports and the CAM table is full. Which type of attack is this?
- ✓
Smurf attack
Why this is correct
A Smurf attack uses ICMP echo requests to a broadcast address to create a denial-of-service via amplification.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
DNS amplification
Why it's wrong here
DNS amplification uses small queries to generate large responses, but it targets DNS servers, not broadcast addresses.
Option-by-option analysis
Why each answer is right or wrong
Understanding why wrong answers are wrong — and when they would be correct — is what separates a 750 score from a 900. The N10-009 exam frequently reuses these exact scenarios with slightly different constraints.
✓Smurf attackCorrect answer▾
Why this is correct
A Smurf attack uses ICMP echo requests to a broadcast address to create a denial-of-service via amplification.
✗ARP spoofingWrong answer — click to see why▾
Why this is wrong here
The attack described involves ICMP echo requests to a broadcast address, which is characteristic of a Smurf attack, not ARP spoofing. ARP spoofing involves sending falsified ARP messages to associate the attacker's MAC address with the IP of a legitimate host, enabling man-in-the-middle attacks.
★ When this WOULD be the correct answer
A network administrator notices that traffic intended for a legitimate server is being redirected to an attacker's machine, causing data interception. Which attack is this?
Why candidates choose this
Candidates may confuse ARP spoofing with any attack that causes performance degradation, or they may not clearly distinguish between attacks that use broadcast traffic versus those that manipulate address resolution.
✗MAC floodingWrong answer — click to see why▾
Why this is wrong here
MAC flooding targets switch MAC address tables by sending many frames with different source MAC addresses, not by sending ICMP echo requests to a broadcast address.
★ When this WOULD be the correct answer
A network administrator notices that the switch is flooding frames to all ports and the CAM table is full. Which type of attack is this?
Why candidates choose this
Candidates may confuse 'flooding' in the question with MAC flooding, not realizing that the attack described uses ICMP and broadcast addresses, not MAC address table exhaustion.
✗DNS amplificationWrong answer — click to see why▾
Why this is wrong here
A DNS amplification attack uses open DNS servers to flood a target with large DNS responses, not ICMP echo requests to a broadcast address.
★ When this WOULD be the correct answer
This option would be correct in a question describing a high volume of DNS queries with spoofed source IPs sent to open resolvers, causing large responses to overwhelm the victim.
Why candidates choose this
Candidates may confuse amplification attacks (like DNS amplification) with the smurf attack because both involve amplifying traffic to overwhelm a target, but they use different protocols and mechanisms.
Analysis generated from the official N10-009blueprint and verified against question context. The “when correct” sections are what AI assistants cite when candidates ask “what’s the difference between these options?”
Common exam traps
Common exam trap: answer the scenario, not the keyword
CompTIA often tests the distinction between amplification attacks (smurf vs. DNS amplification) by focusing on the protocol used (ICMP vs. UDP) and the target address (broadcast vs. open resolver), leading candidates to confuse smurf with DNS amplification if they only remember 'amplification' without the protocol details.
Detailed technical explanation
How to think about this question
The smurf attack relies on the directed broadcast feature, which was common in older routers (e.g., Cisco IOS before 'no ip directed-broadcast' became default). Each host on the target network receives the ICMP echo request and sends an echo reply to the spoofed source, creating amplification equal to the number of hosts. Modern networks mitigate this by disabling directed broadcasts and using ingress filtering (RFC 2827) to block spoofed traffic.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A network engineer segments a warehouse floor into three subnets: 20 scanners, 5 printers, and 2 management hosts. Picking the wrong mask wastes addresses or leaves too few usable hosts. Exam questions test whether you can apply CIDR notation, calculate block size, and identify the correct usable-host range for a given prefix.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Network Security — study guide chapter
Learn the concepts, then practise the questions
- →
Network Security practice questions
Targeted practice on this topic area only
- →
All N10-009 questions
520 questions across all exam domains
- →
CompTIA Network+ N10-009 study guide
Full concept coverage aligned to exam objectives
- →
N10-009 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related N10-009 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Networking Concepts practice questions
Practise N10-009 questions linked to Networking Concepts.
Network Implementation practice questions
Practise N10-009 questions linked to Network Implementation.
Network Operations practice questions
Practise N10-009 questions linked to Network Operations.
Network Security practice questions
Practise N10-009 questions linked to Network Security.
Network Troubleshooting practice questions
Practise N10-009 questions linked to Network Troubleshooting.
Network+ network fundamentals practice questions
Practise N10-009 questions linked to Network+ network fundamentals.
Practice this exam
Start a free N10-009 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this N10-009 question test?
Network Security — This question tests Network Security — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Smurf attack — The smurf attack exploits ICMP by sending echo request packets to a network's broadcast address with a spoofed source IP of the victim. All hosts on the network then reply to the victim, overwhelming it with traffic and causing performance degradation. This matches the scenario of a single host sending ICMP echo requests to the broadcast address.
What should I do if I get this N10-009 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More N10-009 practice questions
- Which of the following network devices operates primarily at Layer 2 of the OSI model and uses MAC addresses to forward…
- Which of the following is a characteristic of UDP when compared to TCP?
- Which of the following IPv6 addresses is a valid link-local address?
- Which of the following security mechanisms requires a user to authenticate before gaining access to the wired network at…
- Which of the following network protocols operates at the Transport layer of the OSI model and provides connection-orient…
- Which of the following is a characteristic of a connectionless protocol at the transport layer?
Last reviewed: Jun 30, 2026
This N10-009 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the N10-009 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.