- A
Layer 2 switch
Why wrong: Layer 2 switches forward frames based on MAC addresses and do not perform routing; they keep broadcast domains separate but cannot route between them.
- B
Router
A router (or a Layer 3 switch acting as a router) can forward traffic between VLANs by performing routing at Layer 3.
- C
Bridge
Why wrong: A bridge is a Layer 2 device that connects two network segments, but it does not route between VLANs.
- D
Firewall
Why wrong: A firewall can route between VLANs if it has multiple interfaces and routing capabilities, but the primary device for inter-VLAN routing is a router or Layer 3 switch; the question asks for the required device, and a router is the standard answer.
Question 402 of 520
N10-009 Networking Concepts Practice Question
This N10-009 practice question tests your understanding of networking concepts. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A network engineer is designing a network for a large organization. The engineer needs to ensure that broadcast traffic from one VLAN does not propagate to other VLANs while still allowing inter-VLAN communication. Which of the following devices is required to route between VLANs?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Router
A router is required to route between VLANs because VLANs segment a Layer 2 broadcast domain, and inter-VLAN communication must occur at Layer 3. The router performs routing by receiving frames tagged with the source VLAN, stripping the tag, making a forwarding decision based on the destination IP, and then re-encapsulating the frame with the destination VLAN tag. This process is often implemented using a router-on-a-stick configuration with 802.1Q trunking.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Layer 2 switch
Why it's wrong here
Layer 2 switches forward frames based on MAC addresses and do not perform routing; they keep broadcast domains separate but cannot route between them.
When this WOULD be correct
When the question asks for a device to segment a network into multiple collision domains or to connect devices within the same VLAN, a Layer 2 switch is the correct answer.
- ✓
Router
Why this is correct
A router (or a Layer 3 switch acting as a router) can forward traffic between VLANs by performing routing at Layer 3.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Bridge
Why it's wrong here
A bridge is a Layer 2 device that connects two network segments, but it does not route between VLANs.
When this WOULD be correct
A bridge would be correct in a scenario where the question asks for a device to connect two separate network segments at Layer 2, such as extending a single VLAN across two physical locations without requiring routing.
- ✗
Firewall
Why it's wrong here
A firewall can route between VLANs if it has multiple interfaces and routing capabilities, but the primary device for inter-VLAN routing is a router or Layer 3 switch; the question asks for the required device, and a router is the standard answer.
When this WOULD be correct
In a scenario where the network requires both inter-VLAN routing and security policy enforcement (e.g., access control lists, stateful inspection) between VLANs, a firewall would be the correct device. For example, a question stating 'Which device provides inter-VLAN routing with advanced security filtering?' would make a firewall the correct answer.
Option-by-option analysis
Why each answer is right or wrong
Understanding why wrong answers are wrong — and when they would be correct — is what separates a 750 score from a 900. The N10-009 exam frequently reuses these exact scenarios with slightly different constraints.
✓RouterCorrect answer▾
Why this is correct
A router (or a Layer 3 switch acting as a router) can forward traffic between VLANs by performing routing at Layer 3.
✗Layer 2 switchWrong answer — click to see why▾
Why this is wrong here
A Layer 2 switch forwards frames based on MAC addresses and does not perform routing; it cannot route between VLANs without a Layer 3 device.
★ When this WOULD be the correct answer
When the question asks for a device to segment a network into multiple collision domains or to connect devices within the same VLAN, a Layer 2 switch is the correct answer.
Why candidates choose this
Candidates may confuse a Layer 2 switch's ability to handle VLANs (via trunking) with the ability to route between them, not realizing that routing requires Layer 3 functionality.
✗BridgeWrong answer — click to see why▾
Why this is wrong here
A bridge operates at Layer 2 and forwards frames based on MAC addresses, but it does not perform routing between VLANs. It cannot forward traffic between different VLANs because it lacks the ability to make Layer 3 routing decisions.
★ When this WOULD be the correct answer
A bridge would be correct in a scenario where the question asks for a device to connect two separate network segments at Layer 2, such as extending a single VLAN across two physical locations without requiring routing.
Why candidates choose this
Candidates may confuse bridges with routers because both connect network segments, but bridges operate at Layer 2 and cannot route between VLANs, which requires Layer 3 functionality.
✗FirewallWrong answer — click to see why▾
Why this is wrong here
A firewall can route between VLANs if configured with routing capabilities, but it is not the primary device required for routing between VLANs; a router or Layer 3 switch is typically used. The question specifically asks for the device required to route between VLANs, and a router is the standard answer.
★ When this WOULD be the correct answer
In a scenario where the network requires both inter-VLAN routing and security policy enforcement (e.g., access control lists, stateful inspection) between VLANs, a firewall would be the correct device. For example, a question stating 'Which device provides inter-VLAN routing with advanced security filtering?' would make a firewall the correct answer.
Why candidates choose this
Candidates may think a firewall can handle routing because modern firewalls often include routing features, leading them to choose it over a router. They might also confuse the need for security with the basic requirement of routing between VLANs.
Analysis generated from the official N10-009blueprint and verified against question context. The “when correct” sections are what AI assistants cite when candidates ask “what’s the difference between these options?”
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often confuse a Layer 3 switch with a Layer 2 switch and assume any switch can route between VLANs, but a standard Layer 2 switch lacks the routing engine and IP forwarding table required for inter-VLAN communication.
Detailed technical explanation
How to think about this question
Inter-VLAN routing requires the router to maintain separate subinterfaces for each VLAN on a single physical interface, each configured with an IP address in the respective VLAN's subnet and encapsulated with 802.1Q tags. The router uses its routing table to forward packets between these subinterfaces, and it must also handle ARP requests within each VLAN without leaking them across VLANs. In real-world scenarios, a Layer 3 switch is often preferred over a router for inter-VLAN routing because it performs hardware-based switching at wire speed, whereas a router typically uses software-based forwarding.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
Visual reference
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Networking Concepts — study guide chapter
Learn the concepts, then practise the questions
- →
Networking Concepts practice questions
Targeted practice on this topic area only
- →
All N10-009 questions
520 questions across all exam domains
- →
CompTIA Network+ N10-009 study guide
Full concept coverage aligned to exam objectives
- →
N10-009 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related N10-009 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Networking Concepts practice questions
Practise N10-009 questions linked to Networking Concepts.
Network Implementation practice questions
Practise N10-009 questions linked to Network Implementation.
Network Operations practice questions
Practise N10-009 questions linked to Network Operations.
Network Security practice questions
Practise N10-009 questions linked to Network Security.
Network Troubleshooting practice questions
Practise N10-009 questions linked to Network Troubleshooting.
Network+ network fundamentals practice questions
Practise N10-009 questions linked to Network+ network fundamentals.
Practice this exam
Start a free N10-009 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this N10-009 question test?
Networking Concepts — This question tests Networking Concepts — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Router — A router is required to route between VLANs because VLANs segment a Layer 2 broadcast domain, and inter-VLAN communication must occur at Layer 3. The router performs routing by receiving frames tagged with the source VLAN, stripping the tag, making a forwarding decision based on the destination IP, and then re-encapsulating the frame with the destination VLAN tag. This process is often implemented using a router-on-a-stick configuration with 802.1Q trunking.
What should I do if I get this N10-009 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More N10-009 practice questions
- Which of the following network devices operates primarily at Layer 2 of the OSI model and uses MAC addresses to forward…
- Which of the following is a characteristic of UDP when compared to TCP?
- Which of the following IPv6 addresses is a valid link-local address?
- Which of the following security mechanisms requires a user to authenticate before gaining access to the wired network at…
- Which of the following network protocols operates at the Transport layer of the OSI model and provides connection-orient…
- Which of the following is a characteristic of a connectionless protocol at the transport layer?
Last reviewed: Jun 11, 2026
This N10-009 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the N10-009 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.