100-140 Practice Question: The effect of the 'ip dhcp snooping trust' command on interface FastEthernet0/1?
Exhibit
ip dhcp snooping ip dhcp snooping vlan 10 interface FastEthernet0/1 ip dhcp snooping trust
Refer to the exhibit. What is the effect of the 'ip dhcp snooping trust' command on interface FastEthernet0/1?
⚠ Common exam trap
Candidates often assume the trust command generates DHCP leases or acts as a DHCP server itself, rather than simply permitting legitimate DHCP server messages through an untrusted port environment.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
It allows DHCP server messages to pass through the interface.
The 'ip dhcp snooping trust' command designates an interface as a trusted source for DHCP messages. In a DHCP snooping-enabled environment, all ports are untrusted by default. By marking an interface as trusted, the switch allows DHCP server responses (such as offers and acknowledgments) to pass through that port. If this command were missing, the switch would drop all incoming DHCP server replies, effectively blocking DHCP functionality for the entire VLAN.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
It disables DHCP snooping for that specific interface.
Why it's wrong here
Snooping stays active on the port; 'trust' only changes how the switch treats DHCP server messages arriving there. Trusted ports may carry server replies such as offers and acknowledgements, while untrusted ports, the default, drop them. Snooping still applies to the VLAN, including building the binding table. Disabling it for a VLAN is done globally with 'no ip dhcp snooping vlan <id>'.
- ✗
It prevents the port from becoming a rogue DHCP server.
Why it's wrong here
Trusting a port does the opposite: it allows DHCP server messages on that port, so a rogue server connected there would be able to hand out addresses. Protection against rogue servers comes from leaving user-facing ports untrusted, which is the default once snooping is enabled. Only ports leading toward the legitimate server or relay should be trusted.
- ✓
It allows DHCP server messages to pass through the interface.
Why this is correct
Once DHCP snooping is enabled, every port is untrusted by default and drops DHCP server messages, OFFER, ACK and NAK, which blocks rogue servers. 'ip dhcp snooping trust' marks a port, typically the uplink toward the legitimate DHCP server or relay, as allowed to carry those messages. 'show ip dhcp snooping' lists trusted interfaces and any rate limits.
- ✗
It forces the port to drop all incoming traffic except DHCP.
Why it's wrong here
The 'ip dhcp snooping trust' command only affects the handling of DHCP packets. It does not act as a general traffic filter for other protocols. All other traffic types (like standard data traffic) are unaffected by this command and are forwarded according to the switch's normal MAC address table logic.
Visual reference
About these practice questions
Courseiva writes every 100-140 question from scratch — 305 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
You might also like
Similar 100-140 questions
- Which TWO of the following are primary security benefits of implementing an Intrusion Prevention System (IPS) in a corpo…
- Refer to the exhibit. What is the impact of this configuration on remote access to the device?
- A company issues smartphones to field staff who access email and internal web applications. The security team wants to r…
- Which protocol is recommended for secure remote administration of Cisco network devices instead of Telnet?
- A small office asks you to harden its Cisco wireless access point. The staff currently connects with the pre-shared key…
Written and reviewed by Johnson Ajibi, MSc IT Security
Security Systems Architect · founder of Courseiva
Last reviewed September 2026 · checked against the official Cisco exam blueprint
This 100-140 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 100-140 exam.