The answer is to verify that the route-target import and export values match on both Provider Edge routers. In an MPLS L3VPN, the route-target extended community acts as a VPN membership filter; the local PE attaches an export RT to VPNv4 prefixes, and the remote PE only imports those prefixes into its VRF if its import RT matches. Even when the local PE correctly installs CE routes and advertises them via BGP VPNv4, a mismatch means the remote PE’s BGP import policy silently discards the prefixes, so they never appear in its BGP table or VRF. On the Cisco SPCOR 350-501 exam, this scenario tests your understanding of how route-targets control VPN route distribution, often appearing as a trick where all other connectivity—IGP, LSPs, and VPNv4 session—is fine, yet routes vanish. A common trap is assuming the issue lies with the VPNv4 session or MPLS labels, but the key is that the remote PE’s BGP table is empty for those prefixes. Memory tip: “Export to send, Import to receive—if they don’t match, the route will leave.”
350-501 MPLS and Segment Routing Practice Question
This 350-501 practice question tests your understanding of mpls and segment routing. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A network engineer is configuring an MPLS L3VPN on a PE router. The VRF is configured with route-target import/export. The PE and CE are running eBGP. The CE advertises routes to the PE, and the PE installs them in the VRF routing table. However, the remote PE does not receive these routes via BGP VPNv4. The local PE's BGP table shows the VPNv4 prefixes with the correct next hop and label. The remote PE's BGP table shows no such prefixes. The IGP between the PEs is working, and MPLS LSPs are up. What is the most likely cause and correct action?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue: "most likely"
Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Check the route-target import/export configuration on both PEs and ensure they match
Despite the local PE having the routes in BGP VPNv4, the remote PE does not receive them. This often indicates that the route-target export on the local PE does not match the route-target import on the remote PE, or that the VPNv4 session is not correctly configured. Since the local PE shows the prefixes in its BGP VPNv4 table, they are being advertised to the BGP peer, but the remote PE's import policy filters them due to mismatched RT. The correct action is to verify the route-target configuration on both PEs.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✗
Enable the 'soft-reconfiguration inbound' command
Why it's wrong here
Soft-reconfiguration is for storing updates, not for fixing route-target issues.
✗
Reset the BGP session between the PEs
Why it's wrong here
Resetting sessions may not fix a configuration mismatch.
Check the route-target import/export configuration on both PEs and ensure they match
Why this is correct
If route-target export does not match the import, the remote PE will discard the route.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
Read the scenario before looking for a memorised answer.
Find the constraint that changes the correct option.
Eliminate answers that are true in general but not in this case.
Use explanations to understand the rule behind the answer.
TExam Day Tips
→Underline the problem statement mentally.
→Watch for words such as best, first, most likely and least administrative effort.
→Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 350-501 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 350-501 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
MPLS and Segment Routing — This question tests MPLS and Segment Routing — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Check the route-target import/export configuration on both PEs and ensure they match — Despite the local PE having the routes in BGP VPNv4, the remote PE does not receive them. This often indicates that the route-target export on the local PE does not match the route-target import on the remote PE, or that the VPNv4 session is not correctly configured. Since the local PE shows the prefixes in its BGP VPNv4 table, they are being advertised to the BGP peer, but the remote PE's import policy filters them due to mismatched RT. The correct action is to verify the route-target configuration on both PEs.
What should I do if I get this 350-501 question wrong?
Identify which 350-501 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This 350-501 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-501 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.