Free 350-501 practice test — 971+ 350-501 practice questions with detailed explanations across all 8 official 350-501 exam domains. Every set is scored and drawn from the live question bank — so you practise exactly what the exam tests, not outdated dumps.
Courseiva includes 971+ Cisco SPCOR / CCNP Service Provider Core 350-501 practice questions across the official exam domains.
Feature
Courseiva
This free 350-501 practice test mirrors the structure and difficulty of the real Cisco SPCOR / CCNP Service Provider Core 350-501 exam. Every question is written against the official 2026 exam blueprint published by Cisco, ensuring you practise exactly what the exam tests — not last year's objectives.
The 350-501 blueprint is divided into 8weighted domains. Questions on this page are distributed proportionally across each domain, so the mix you see here reflects the same weighting you'll face on exam day. High-weight domains like Networking and MPLS and Segment Routing contribute the most questions, meaning focused practice on these areas gives you the highest return on study time.
350-501 Exam Blueprint — 8 Domains
MPLS and Segment Routing
Automation and Quality of Services
Architecture
Networking
Security and Services
Automation and Quality of Service
Services
Automation and Assurance
63 numbered sets, 8 domain question banks, and targeted sessions — every page is a unique set of questions.
Choose all correct answers
Each chapter page covers one topic in depth — theory, key concepts, and focused practice questions. Use these to close knowledge gaps before returning to full practice tests.
Getting the most from practice questions requires more than just clicking through answers. Here is the study method used by candidates who pass 350-501 on their first attempt:
Answer before revealing
Read each 350-501 question fully, eliminate obviously wrong choices, then commit to an answer before clicking to reveal. This active recall process is what builds lasting knowledge.
Read every explanation
Even when you answer correctly, read the full explanation. Knowing WHY the right answer is correct — and why the distractors are wrong — is what separates a 750 score from a 900 score.
Track weak domains
Note which 350-501 domains you get wrong most often. Then do a targeted 20-30 question session focused only on that domain until your accuracy improves.
Simulate exam pacing
The real 350-501 gives you roughly 1.3 minutes per question. Use the 60 or 120-question sessions to practise hitting that pace comfortably.
Most candidates who pass 350-501 on their first attempt report doing between 400 and 800 practice questions over 4–8 weeks of preparation. With 971+ questions in the Courseiva bank, you have more than enough material to build that repetition without seeing the same question twice.
Answer each question to reveal the full explanation and correct answer. This starter set is drawn from all 8 exam domains in blueprint proportion. Use the session selector to start a longer focused practice run.
An engineer is troubleshooting an MPLS L3VPN where customers behind CE1 cannot reach a specific prefix behind CE2. The PE routers are using OSPF as the IGP and LDP for label distribution. On PE2, the prefix is present in the VRF routing table, but not in the VRF forwarding table. What is the most likely cause?
Select an answer to reveal the explanation
A service provider is designing a new MPLS core network using Segment Routing with MPLS data plane. They require traffic engineering capabilities to optimize bandwidth utilization. Which technology should be used to compute optimal paths based on IGP link attributes and bandwidth constraints?
Select an answer to reveal the explanation
An engineer is deploying MPLS in the core and wants to ensure that all core routers use the same label for a specific prefix, regardless of which router originated it. Which MPLS label allocation mode should be used?
Select an answer to reveal the explanation
In the DiffServ model, which DSCP value is used for Expedited Forwarding (EF) to support voice traffic?
Select an answer to reveal the explanation
A service provider is designing a new MPLS L3VPN service. The customer requires that their VPN traffic be isolated from other customers and that the provider edge routers maintain separate routing tables for each VPN. Which architectural component is essential for this separation?
Select an answer to reveal the explanation
An operator notices that a new MPLS-TE tunnel is not being established. The tunnel configuration includes a dynamic path option and a bandwidth of 100 Mbps. The network uses RSVP-TE with CSPF. The link-state database shows sufficient reservable bandwidth on all links along the calculated path. What is the most likely cause of the tunnel establishment failure?
Select an answer to reveal the explanation
A service provider is deploying MPLS L3VPN over an OSPF backbone. The PE routers are configured with OSPF as the IGP. The CE router of customer A is connected to two PEs for redundancy. Which configuration is required on the PE routers to ensure that the CE router can load-balance traffic across both PEs without loops?
Select an answer to reveal the explanation
An ISP is designing an MPLS core network and needs to choose an IGP that supports fast convergence. Which IGP meets this requirement and is most commonly used in MPLS core networks?
Select an answer to reveal the explanation
A network engineer is troubleshooting an MPLS L3VPN where the CE router is receiving the correct VPN prefixes from the PE, but traffic from the CE to those prefixes is being dropped. The PE has a default route pointing to the CE. What is the most likely cause?
Select an answer to reveal the explanation
A service provider is deploying segment routing in its MPLS core. Which label allocation method is used by segment routing to distribute prefix SIDs?
Select an answer to reveal the explanation
An engineer is configuring an MPLS L3VPN and needs to ensure that the PE router installs VPNv4 routes from a remote PE into the VRF of a customer. The remote PE sends a VPNv4 route with route-target 100:1. Which configuration on the local PE causes the route to be imported into the VRF?
Select an answer to reveal the explanation
A service provider wants to protect its routers from CPU overload caused by excessive traffic to the control plane. Which mechanism should be configured on IOS XR routers to classify and rate-limit management traffic?
Select an answer to reveal the explanation
A service provider is implementing QoS on an MPLS network to support voice, video, and data traffic. Which queuing mechanism provides the lowest latency for real-time traffic?
Select an answer to reveal the explanation
A service provider is deploying MPLS Layer 3 VPN and needs to ensure that BGP next-hop resolution works correctly for VPNv4 prefixes learned from a route reflector. The PE routers are directly connected to the RR via iBGP, and there is an IGP running within the MPLS core. Which condition must be met for the PE to install the VPNv4 prefix into its routing table?
Select an answer to reveal the explanation
A service provider is designing a multicast solution for a Layer 3 VPN. They want to use MVPN with BGP signaling (draft-rosen). The PE routers are configured with VRF and multicast routing enabled. Which BGP address family must be enabled between PE routers to carry multicast routing information?
Select an answer to reveal the explanation
A network engineer is troubleshooting an MPLS TE tunnel that is not coming up. The tunnel is configured with a strict explicit path, and the path includes an interface that is currently down. Which action should the engineer take to allow the tunnel to use an alternative path?
Select an answer to reveal the explanation
Refer to the exhibit. A service provider is applying this QoS policy on a PE-CE interface. The business customer complains that voice traffic (marked with DSCP EF) experiences drops during congestion. What is the likely cause?
Select an answer to reveal the explanation
A service provider is implementing network automation using YANG data models. They need to ensure that the automation solution supports both configuration and operational state data retrieval. Which NETCONF operation should be used to retrieve operational state data?
Select an answer to reveal the explanation
Which tool is used to validate YANG data models against device capabilities and to generate Python bindings for automation scripts?
Select an answer to reveal the explanation
A network engineer is automating BGP configuration using the Cisco IOS-XE YANG model. They want to enable the 'always-compare-med' feature under BGP. Which XPath expression correctly targets this leaf?
Select an answer to reveal the explanation
Answer all 20 questions to see your domain score breakdown
A structured study plan dramatically increases your chances of passing 350-501 on the first attempt. The most effective approach combines reading the official Cisco documentation or a study guide, watching video explanations for difficult concepts, and then reinforcing everything with daily practice questions.
We recommend the following weekly structure for 350-501 preparation:
Cover each 350-501 domain systematically. Read the exam objectives, watch explanatory content, and do 10–20 practice questions per domain to test understanding as you go.
Run full 50–60 question mixed sessions daily. Review every wrong answer in detail. Identify which domains are consistently scoring below 70% and revisit those study materials.
Do 100–120 question timed sessions to simulate real exam conditions. Aim for consistent scores above 80% before booking your exam date. A score above 80% in practice typically translates to a passing 350-501 score.
On exam day, the 350-501 tests your ability to apply knowledge to realistic scenarios — not just recall definitions. This is why reading explanations and understanding the reasoning behind every answer matters more than simply grinding question volume. Use the high-count sessions (100, 120) in the final weeks as your confidence benchmark.
Questions
90
On the real exam
Time limit
120 min
1.3 min per question
Passing score
Variable
See vendor page
Cisco passing scores vary by exam version and are not always publicly listed. Check the official Cisco exam page before booking.
CLI output interpretation, network topology analysis, routing behaviour, switching concepts, troubleshooting, and configuration questions.
Yes. Courseiva provides free Cisco SPCOR / CCNP Service Provider Core 350-501 practice questions with explanations across the official exam domains. Start with a quick practice test, then continue with topic-based practice, mock exams, missed-question review, bookmarked questions, weak-topic recommendations, and readiness tracking. No account required. Create a free account to unlock per-domain analytics and progress tracking across every certification on the platform. Courseiva is free forever, supported by advertising.
Every question is written against the official 350-501 exam blueprint published by Cisco. Our questions follow the same wording style, scenario complexity, and answer structure as the actual exam. They are original questions — not brain dumps — so you learn the underlying concepts and reasoning, not just memorised answers. Candidates who study with brain dumps often pass but have no transferable knowledge; Courseiva questions make you genuinely competent.
Most candidates who pass 350-501 on their first attempt do 30–60 questions per day. Use the Quick 10 session for daily warm-ups when you are short on time. On study days, run a 50 or 60-question session to build stamina. Reserve 100 and 120-question sessions for the final two weeks when you want to simulate real exam conditions and benchmark your readiness.
The 350-501 covers 8 domains: MPLS and Segment Routing (20%), Automation and Quality of Services (0%), Architecture (15%), Networking (30%), Security and Services (0%), Automation and Quality of Service (0%), Services (20%), Automation and Assurance (15%). Each domain carries a different weight, so allocate your study time accordingly. The highest-weighted domains — Networking and MPLS and Segment Routing — should receive the most attention.
Exam dumps are memorised question-and-answer lists taken from actual exam papers, often obtained illegally and shared without Cisco's authorisation. Using them violates your NDA and Cisco's certification agreement, and can result in certification revocation. Courseiva questions are 100% original — written by certified engineers to test the same knowledge areas using new scenarios and wording. You learn the material, not just the answers.
Per-domain analytics, spaced repetition, daily challenges — and every other certification on the platform.
Sign Up FreeFree forever · Every certification included