- A
The engineer used the 'spanning-tree root primary' command without specifying the VLAN, which sets the priority for all VLANs.
Correct because the command without the VLAN keyword applies to all VLANs, causing the same switch to be root for all VLANs.
- B
The engineer enabled BPDU guard on all access ports, which prevents the switch from receiving superior BPDUs.
Why wrong: Incorrect because BPDU guard disables ports that receive BPDUs, but it does not affect the root bridge election process.
- C
The engineer enabled PortFast on all trunk ports, which causes the switch to ignore BPDUs and become root.
Why wrong: Incorrect because PortFast is for access ports and does not affect root bridge election; it only speeds up transition to forwarding.
- D
The engineer enabled UplinkFast, which forces the switch to become the root bridge for all VLANs.
Why wrong: Incorrect because UplinkFast is a Cisco proprietary feature that improves convergence after uplink failure, but it does not force a switch to become root.
CCNP Spanning Tree Protocol Practice Question
This 350-401 practice question tests your understanding of spanning tree protocol. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An engineer is designing a redundant Layer 2 network with multiple VLANs. The network uses Rapid PVST+ for STP. The engineer wants to ensure that different VLANs have different root bridges to optimize traffic flow. The distribution switches are Cisco Catalyst 9300s. The engineer has configured one distribution switch as the root for VLANs 10 and 20, and the other as the root for VLANs 30 and 40. However, after implementation, the engineer notices that all VLANs have the same root bridge. What is the most likely cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"most likely"Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The engineer used the 'spanning-tree root primary' command without specifying the VLAN, which sets the priority for all VLANs.
The 'spanning-tree root primary' command without specifying a VLAN sets the bridge priority to 24576 for all VLANs on the switch, making it the root for every VLAN. Since the engineer intended different root bridges per VLAN, this command overrides any per-VLAN priority settings and causes all VLANs to elect the same root bridge.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The engineer used the 'spanning-tree root primary' command without specifying the VLAN, which sets the priority for all VLANs.
Why this is correct
Correct because the command without the VLAN keyword applies to all VLANs, causing the same switch to be root for all VLANs.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The engineer enabled BPDU guard on all access ports, which prevents the switch from receiving superior BPDUs.
Why it's wrong here
Incorrect because BPDU guard disables ports that receive BPDUs, but it does not affect the root bridge election process.
- ✗
The engineer enabled PortFast on all trunk ports, which causes the switch to ignore BPDUs and become root.
Why it's wrong here
Incorrect because PortFast is for access ports and does not affect root bridge election; it only speeds up transition to forwarding.
- ✗
The engineer enabled UplinkFast, which forces the switch to become the root bridge for all VLANs.
Why it's wrong here
Incorrect because UplinkFast is a Cisco proprietary feature that improves convergence after uplink failure, but it does not force a switch to become root.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Cisco often tests the nuance that the 'spanning-tree root primary' command without a VLAN parameter applies to all VLANs, leading candidates to overlook the need for per-VLAN configuration when designing asymmetric root bridges.
Detailed technical explanation
How to think about this question
The 'spanning-tree root primary' macro sets the bridge priority to 24576 (or 4096 if the current root priority is higher) for the specified VLAN, but when no VLAN is specified, it applies the priority to all VLANs globally. This is a common misconfiguration when engineers assume the command is VLAN-specific by default, whereas the correct approach is to use 'spanning-tree vlan <vlan-id> root primary' to set per-VLAN root bridges. In Rapid PVST+, each VLAN runs its own STP instance, so priority must be set per VLAN to achieve different root bridges.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Spanning Tree Protocol — study guide chapter
Learn the concepts, then practise the questions
- →
Spanning Tree Protocol practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
Spanning Tree Protocol — This question tests Spanning Tree Protocol — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The engineer used the 'spanning-tree root primary' command without specifying the VLAN, which sets the priority for all VLANs. — The 'spanning-tree root primary' command without specifying a VLAN sets the bridge priority to 24576 for all VLANs on the switch, making it the root for every VLAN. Since the engineer intended different root bridges per VLAN, this command overrides any per-VLAN priority settings and causes all VLANs to elect the same root bridge.
What should I do if I get this 350-401 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.