Question 318 of 2,015
QoSmediumMultiple ChoiceObjective-mapped

Quick Answer

The correct answer is that incoming packets matching the VOICE class will have their DSCP set to EF (46), VIDEO to AF41 (34), and all others to default (0). This is because the `set dscp` command within a policy-map directly assigns a specific Differentiated Services Code Point value to packets classified by the class map, overriding any previous markings at Layer 2 or Layer 3. On the ENCOR 350-401 exam, this question tests your ability to read a QoS policy-map and understand that DSCP marking occurs at the ingress interface when the `service-policy input` command is applied. A common trap is confusing DSCP values with their decimal equivalents—remember that EF is always 46, AF41 is 34, and default is 0. For a quick memory tip, think of EF as "Expedited Forwarding" for voice (46), AF41 as "Assured Forwarding" for video (34), and default as "best effort" (0).

CCNP QoS Practice Question

This 350-401 practice question tests your understanding of qos. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Examine the following configuration:

policy-map MARKING

class VOICE

set dscp ef

class VIDEO

set dscp af41

class class-default

set dscp default

interface GigabitEthernet0/0

service-policy input MARKING

Which statement is true?

Question 1mediummultiple choice
Study the full QoS explanation →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Incoming packets matching the VOICE class will have their DSCP set to EF (46), VIDEO to AF41 (34), and all others to default (0).

This policy-map sets DSCP values for incoming traffic based on the class. VOICE traffic is marked as EF (46), VIDEO as AF41 (34), and all other traffic as default (0).

Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Incoming packets matching the VOICE class will have their DSCP set to EF (46), VIDEO to AF41 (34), and all others to default (0).

    Why this is correct

    Correct. The 'set dscp' command modifies the DSCP field of matching packets.

    Related concept

    Read the scenario before looking for a memorised answer.

  • The policy-map will only mark packets if the interface is congested.

    Why it's wrong here

    Incorrect. Marking occurs on all packets regardless of congestion.

  • The configuration is invalid because 'set dscp' cannot be used in a 'service-policy input' direction.

    Why it's wrong here

    Incorrect. 'set dscp' is commonly used in the input direction to mark packets.

  • The policy-map will remark the DSCP of outgoing packets on GigabitEthernet0/0.

    Why it's wrong here

    Incorrect. The 'service-policy input' applies to incoming traffic.

Common exam traps

Common exam trap: answer the scenario, not the keyword

Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.

Detailed technical explanation

How to think about this question

This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.

KKey Concepts to Remember

  • Read the scenario before looking for a memorised answer.
  • Find the constraint that changes the correct option.
  • Eliminate answers that are true in general but not in this case.
  • Use explanations to understand the rule behind the answer.

TExam Day Tips

  • Underline the problem statement mentally.
  • Watch for words such as best, first, most likely and least administrative effort.
  • Review why wrong options are wrong, not only why the correct option is correct.

Key takeaway

Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Real-world example

How this comes up in practice

A practitioner preparing for the 350-401 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.

What to study next

Got this wrong? Here's your next step.

Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.

Related practice questions

Related 350-401 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 350-401 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 350-401 question test?

QoS — This question tests QoS — Read the scenario before looking for a memorised answer..

What is the correct answer to this question?

The correct answer is: Incoming packets matching the VOICE class will have their DSCP set to EF (46), VIDEO to AF41 (34), and all others to default (0). — This policy-map sets DSCP values for incoming traffic based on the class. VOICE traffic is marked as EF (46), VIDEO as AF41 (34), and all other traffic as default (0).

What should I do if I get this 350-401 question wrong?

Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.

What is the key concept behind this question?

Read the scenario before looking for a memorised answer.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 18, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.