- A
SSID: The network name broadcast by a wireless access point.
This option correctly matches all six WLAN terms to their accurate descriptions, reflecting standard Cisco definitions.
- B
BSSID: The MAC address of a wireless access point's radio interface.
This is incorrect because BSS is a single AP, not multiple; ESS is multiple APs, not a single one; Beacon frames are sent by APs, not client-initiated; Probe requests are client-initiated, not AP advertisements.
- C
WPA2: A security protocol that uses AES encryption for Wi-Fi networks.
This is incorrect because Beacon frames are sent by APs to advertise the network, not client-initiated; Probe requests are sent by clients to discover APs, not to advertise APs.
- D
Beacon frame: A management frame broadcast periodically to announce the presence of a WLAN.
This is incorrect because BSS is a single AP, not multiple; ESS is multiple APs, not a single one.
CCNA Network Infrastructure and Connectivity Practice Question
This 200-301 practice question tests your understanding of network infrastructure and connectivity. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the wireless LAN terms on the left to their correct descriptions on the right.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
SSID: The network name broadcast by a wireless access point.
802.11ac is a wireless standard that operates exclusively in the 5 GHz band and supports MU-MIMO, matching that description. 802.11ax (Wi-Fi 6) introduces OFDMA and works in both 2.4 GHz and 5 GHz, so it correctly pairs with that description. WPA3 uses Simultaneous Authentication of Equals (SAE) to protect against offline dictionary attacks, making it the right match. The SSID is defined as a 32-character alphanumeric name identifying a wireless network, which directly matches. Channel overlap refers to interference from partially overlapping frequency ranges, exactly as described. WLC management access methods include SSH, HTTP/HTTPS, and SNMP, fitting the given description.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
SSID: The network name broadcast by a wireless access point.
Why this is correct
This option correctly matches all six WLAN terms to their accurate descriptions, reflecting standard Cisco definitions.
Related concept
CIDR notation defines the prefix length.
- ✓
BSSID: The MAC address of a wireless access point's radio interface.
Why this is correct
This is incorrect because BSS is a single AP, not multiple; ESS is multiple APs, not a single one; Beacon frames are sent by APs, not client-initiated; Probe requests are client-initiated, not AP advertisements.
Related concept
CIDR notation defines the prefix length.
- ✓
WPA2: A security protocol that uses AES encryption for Wi-Fi networks.
Why this is correct
This is incorrect because Beacon frames are sent by APs to advertise the network, not client-initiated; Probe requests are sent by clients to discover APs, not to advertise APs.
Related concept
CIDR notation defines the prefix length.
- ✓
Beacon frame: A management frame broadcast periodically to announce the presence of a WLAN.
Why this is correct
This is incorrect because BSS is a single AP, not multiple; ESS is multiple APs, not a single one.
Related concept
CIDR notation defines the prefix length.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A network engineer segments a warehouse floor into three subnets: 20 scanners, 5 printers, and 2 management hosts. Picking the wrong mask wastes addresses or leaves too few usable hosts. Exam questions test whether you can apply CIDR notation, calculate block size, and identify the correct usable-host range for a given prefix.
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 200-301 subnetting questions on CIDR, address ranges, and subnet selection.
- →
Network Infrastructure and Connectivity — study guide chapter
Learn the concepts, then practise the questions
- →
Network Infrastructure and Connectivity practice questions
Targeted practice on this topic area only
- →
All 200-301 questions
1,819 questions across all exam domains
- →
CCNA 200-301 v2 study guide
Full concept coverage aligned to exam objectives
- →
200-301 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 200-301 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Infrastructure and Connectivity practice questions
Practise 200-301 questions linked to Network Infrastructure and Connectivity.
Switching and Network Access practice questions
Practise 200-301 questions linked to Switching and Network Access.
IP Routing practice questions
Practise 200-301 questions linked to IP Routing.
Network Services and Security practice questions
Practise 200-301 questions linked to Network Services and Security.
AI and Network Operations practice questions
Practise 200-301 questions linked to AI and Network Operations.
CCNA subnetting practice questions
Practise IPv4 subnetting, CIDR, masks, host ranges and subnet selection.
CCNA OSPF practice questions
Practise OSPF neighbours, router IDs, metrics, areas and routing-table interpretation.
CCNA VLAN practice questions
Practise VLANs, access ports, trunks, allowed VLANs and switching scenarios.
CCNA STP practice questions
Practise spanning tree, root bridge election, port roles and STP troubleshooting.
CCNA EtherChannel practice questions
Practise LACP, PAgP, port-channel behaviour and bundle requirements.
CCNA ACL practice questions
Practise standard and extended ACLs, permit/deny logic and traffic filtering.
CCNA NAT practice questions
Practise static NAT, dynamic NAT, PAT and inside/outside address translation.
Practice this exam
Start a free 200-301 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 200-301 question test?
Network Infrastructure and Connectivity — This question tests Network Infrastructure and Connectivity — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: SSID: The network name broadcast by a wireless access point. — 802.11ac is a wireless standard that operates exclusively in the 5 GHz band and supports MU-MIMO, matching that description. 802.11ax (Wi-Fi 6) introduces OFDMA and works in both 2.4 GHz and 5 GHz, so it correctly pairs with that description. WPA3 uses Simultaneous Authentication of Equals (SAE) to protect against offline dictionary attacks, making it the right match. The SSID is defined as a 32-character alphanumeric name identifying a wireless network, which directly matches. Channel overlap refers to interference from partially overlapping frequency ranges, exactly as described. WLC management access methods include SSH, HTTP/HTTPS, and SNMP, fitting the given description.
What should I do if I get this 200-301 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 200-301 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 6, 2026
This 200-301 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 200-301 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.