- A
Allocate an Elastic IP and associate it with the NAT Gateway
EIP is required for NAT Gateway to communicate with Internet Gateway.
- B
Configure the security group to allow outbound traffic to 0.0.0.0/0
Why wrong: Default security group allows all outbound traffic.
- C
Create a NAT Gateway in a public subnet
NAT Gateway enables outbound traffic.
- D
Add a route in the private subnet route table pointing to the NAT Gateway for 0.0.0.0/0
Routes traffic to NAT.
- E
Attach an Internet Gateway to the VPC
Why wrong: Internet Gateway is needed but not sufficient alone.
ANS-C01 Network Implementation Practice Question
This ANS-C01 practice question tests your understanding of network implementation. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which THREE actions are required to enable an EC2 instance in a private subnet to download software updates from the internet? (Select THREE.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Allocate an Elastic IP and associate it with the NAT Gateway
Options B, C, and D are correct. A NAT Gateway in a public subnet, a route to it, and an EIP for the NAT Gateway. Option A is wrong because an Internet Gateway alone does not provide outbound access for private subnets. Option E is wrong because security groups allow outbound by default.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Allocate an Elastic IP and associate it with the NAT Gateway
- ✗
Configure the security group to allow outbound traffic to 0.0.0.0/0
Why it's wrong here
Default security group allows all outbound traffic.
- ✓
Create a NAT Gateway in a public subnet
- ✓
Add a route in the private subnet route table pointing to the NAT Gateway for 0.0.0.0/0
- ✗
Attach an Internet Gateway to the VPC
Why it's wrong here
Internet Gateway is needed but not sufficient alone.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.
- →
Network Implementation — study guide chapter
Learn the concepts, then practise the questions
- →
Network Implementation practice questions
Targeted practice on this topic area only
- →
All ANS-C01 questions
1,705 questions across all exam domains
- →
AWS Certified Advanced Networking Specialty ANS-C01 study guide
Full concept coverage aligned to exam objectives
- →
ANS-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related ANS-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Management and Operations practice questions
Practise ANS-C01 questions linked to Network Management and Operations.
Network Security, Compliance and Governance practice questions
Practise ANS-C01 questions linked to Network Security, Compliance and Governance.
Network Design practice questions
Practise ANS-C01 questions linked to Network Design.
Network Implementation practice questions
Practise ANS-C01 questions linked to Network Implementation.
ANS-C01 fundamentals practice questions
Practise ANS-C01 questions linked to ANS-C01 fundamentals.
ANS-C01 scenario practice questions
Practise ANS-C01 questions linked to ANS-C01 scenario.
ANS-C01 troubleshooting practice questions
Practise ANS-C01 questions linked to ANS-C01 troubleshooting.
Practice this exam
Start a free ANS-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this ANS-C01 question test?
Network Implementation — This question tests Network Implementation — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: Allocate an Elastic IP and associate it with the NAT Gateway — Options B, C, and D are correct. A NAT Gateway in a public subnet, a route to it, and an EIP for the NAT Gateway. Option A is wrong because an Internet Gateway alone does not provide outbound access for private subnets. Option E is wrong because security groups allow outbound by default.
What should I do if I get this ANS-C01 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 20, 2026
This ANS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the ANS-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.