SC-200 Timed Practice Test 3 — 10 Questions

Question 1

A security analyst is investigating a compromised user account using Microsoft 365 Defender. The analyst wants to see all the sign-in attempts made by this user in the last 24 hours, including the IP addresses and locations. Which advanced hunting table should the analyst query?

Accepted Answer

IdentityLogonEvents. The IdentityLogonEvents table in Microsoft 365 Defender advanced hunting captures authentication events from Azure Active Directory, including sign-in attempts, IP addresses, and geographic locations. This makes it the correct table for an analyst investigating a compromised user account to review all sign-in activity over the last 24 hours.

Answer

AlertInfo

Answer

EmailAttachmentInfo

Answer

DeviceLogonEvents

Question 2

A security analyst in Microsoft 365 Defender needs to review all actions that were automatically taken by an investigation (e.g., isolating a device, deleting a file) that occurred during an incident. Where should the analyst find this list of executed actions?

Accepted Answer

Action center. The Action center in Microsoft 365 Defender is the centralized location that records all manual and automated response actions taken during investigations, such as device isolation, file deletion, or process termination. This includes actions automatically executed by automated investigation and response (AIR) playbooks during an incident. The analyst can filter the Action center by 'Automated' to see only those actions taken without manual intervention.

Answer

Hunting queries

Answer

Incidents page

Answer

Alerts page

Question 3

A security analyst is creating a custom detection rule in Microsoft 365 Defender using Advanced Hunting. The rule should alert when a user signs in from an IP address that is not in the company's approved IP range (192.168.0.0/16). Which KQL function should be used to compare the sign-in IP against the approved range?

Accepted Answer

ipv4_is_in_range(SigninIP, '192.168.0.0/16'). The correct KQL function is `ipv4_is_in_range()` because it is specifically designed to check whether an IPv4 address falls within a given CIDR range. In this scenario, the function compares the `SigninIP` field against the company's approved range `192.168.0.0/16` and returns `true` if the IP is within that range, enabling the rule to alert on out-of-range sign-ins. This function handles subnet mask calculations natively, ensuring accurate and efficient IP range matching without manual parsing.

Answer

has_any(SigninIP, dynamic(['192.168.0.0/16']))

Answer

ipv4_is_private(SigninIP)

Answer

SigninIP startswith '192.168.'

Question 4

A security analyst in Microsoft Sentinel wants to correlate Microsoft Entra ID sign-in logs with IP addresses known to be associated with a threat actor. The threat actor's IPs are stored in a custom table named 'ThreatIntelligence_IP' that is ingested daily. The analyst needs to create an analytics rule that triggers only when a sign-in occurs from one of these IPs AND when the user is not in a list of approved users (stored in another custom table 'ApprovedUsers'). Which KQL query pattern should the analyst use to achieve this correlation and filtering?

Accepted Answer

SigninLogs | join kind=inner ThreatIntelligence_IP on IPAddress | join kind=leftanti (ApprovedUsers | project UserId) on $left.UserId == $right.UserId. Option C is correct because it uses a `join kind=inner` to match sign-in logs with threat IPs, ensuring only sign-ins from known malicious IPs are considered. It then applies a `join kind=leftanti` to exclude any user who appears in the ApprovedUsers table, effectively filtering out approved users. This pattern guarantees that the rule triggers only when both conditions are met: the IP is in the threat list and the user is not approved.

Answer

SigninLogs | join ThreatIntelligence_IP on IPAddress | where UserId notin (ApprovedUsers | project UserId)

Answer

SigninLogs | where IPAddress in (ThreatIntelligence_IP | project IPAddress) and UserId !in (ApprovedUsers | project UserId)

Answer

SigninLogs | join ThreatIntelligence_IP on IPAddress | where not(UserId in (ApprovedUsers | project UserId))

Question 5

A security analyst in Microsoft Sentinel is creating a scheduled analytics rule to detect multiple failed logon attempts from the same source IP address. The rule should generate an incident only when the count of failed logons exceeds 10 within a 5-minute window. Which configuration setting is essential to limit the incident generation to this threshold?

Accepted Answer

Alert threshold set to a value of 10. The alert threshold setting in a Microsoft Sentinel scheduled analytics rule directly controls the minimum number of query results required to generate an incident. By setting the threshold to 10, the rule will only fire when the query returns more than 10 failed logon events within the 5-minute window, matching the requirement exactly.

Answer

Event grouping set to 'Group all events into a single alert'

Answer

Query scheduling set to run every 5 minutes

Answer

Entity mapping for source IP address

Question 6

A security analyst is writing a Kusto Query Language (KQL) advanced hunting query in Microsoft 365 Defender to detect lateral movement using Remote Desktop Protocol (RDP). Which table should the analyst join with the DeviceNetworkEvents table to identify processes initiating outgoing RDP connections?

Accepted Answer

DeviceProcessEvents. The DeviceNetworkEvents table logs network connections, including outgoing RDP traffic (port 3389). To identify which process initiated a specific outgoing RDP connection, you must join with the DeviceProcessEvents table on DeviceId and Timestamp (or ProcessId), because DeviceProcessEvents contains the process creation details (e.g., mstsc.exe) that launched the network connection. This join reveals the parent process responsible for the lateral movement attempt.

Answer

DeviceLogonEvents

Answer

DeviceFileEvents

Answer

DeviceRegistryEvents

Question 7

A SOC analyst needs to create a custom scheduled analytics rule in Microsoft Sentinel that detects when a user attempts to sign in from an IP address not in the organization's allowlist. The rule should run every 5 minutes. Which table should the analyst query?

Accepted Answer

SigninLogs. The SigninLogs table in Microsoft Sentinel captures interactive user sign-in events, including the source IP address. Since the rule needs to detect user sign-in attempts from non-allowlisted IPs, SigninLogs is the correct table to query. It provides the necessary fields like UserPrincipalName, IPAddress, and ResultType to build the detection logic.

Answer

AADNonInteractiveUserSignInLogs

Answer

AuditLogs

Answer

AzureActivity

Question 8

A security analyst is investigating a ransomware incident and needs to find all files that were written to a specific device within a 5-minute window before the ransomware process started. The analyst knows the device name and the ransomware process start time. Which advanced hunting table and KQL operator combination would be most efficient to find the file creation events?

Accepted Answer

DeviceFileEvents with where. DeviceFileEvents is the correct table because it specifically captures file creation, modification, and deletion events on devices. Using the `where` operator to filter by device name and a timestamp range (5 minutes before the ransomware process start time) is the most efficient way to retrieve the exact file creation events needed for the investigation.

Answer

DeviceProcessEvents with join

Answer

DeviceEvents with where

Answer

DeviceImageLoadEvents with where

Question 9

A SOC analyst is creating a scheduled analytics rule in Microsoft Sentinel to detect sign-ins from IP addresses that are not in the organization's known allow list. The allow list is maintained in a custom watchlist named 'AllowedIPs'. The analyst wants the KQL query to efficiently filter out allowed IPs. Which KQL approach should the analyst use?

Accepted Answer

Use the _GetWatchlist('AllowedIPs') function and filter with the '!in' operator.. Option C is correct because the _GetWatchlist('AllowedIPs') function retrieves the watchlist content at query runtime, and combining it with the '!in' operator efficiently filters out sign-ins from IPs present in the watchlist. This approach is dynamic, meaning updates to the watchlist are automatically reflected without modifying the query, and it avoids hardcoding IPs or using inefficient row-by-row lookups.

Answer

Use the 'lookup' operator to map IPs against the watchlist.

Answer

Use a 'let' statement to define a static list of allowed IPs.

Answer

Use the 'evaluate' operator with a python script.

Question 10

A security analyst is investigating a sophisticated attack that involved multiple devices. The analyst needs to create a custom detection rule in Microsoft 365 Defender that triggers when a process with a specific SHA256 hash is executed on any device AFTER an attacker-controlled file is created on another device. Which approach should the analyst use to build this detection?

Accepted Answer

Create a custom detection rule using an advanced hunting query that joins DeviceFileEvents and DeviceProcessEvents, and schedule it in Microsoft 365 Defender.. Option A is correct because the requirement is to correlate two distinct events (file creation on one device and process execution on another) across time and devices. An advanced hunting query in Microsoft 365 Defender can join DeviceFileEvents and DeviceProcessEvents tables using a common indicator (e.g., attacker-controlled file hash) and schedule the query as a custom detection rule. This is the only native Microsoft 365 Defender approach that supports multi-device, multi-event correlation with scheduled evaluation.

Answer

Use the Microsoft 365 Defender incident creation rule to generate an incident when the behavior is observed.

Answer

Use Microsoft Sentinel analytics rules with a data connector to Microsoft 365 Defender.

Answer

Use Microsoft Defender for Cloud's workload protection alerts.