PCNE Practice Test 1 — 25 Questions

Question 1

You are configuring a VPC Service Controls perimeter to protect a project containing BigQuery datasets. Access should be allowed only from a specific VPC network and only for users with a specific access level. Which THREE components must you define? (Choose 3)

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

Service perimeter. VPC Service Controls perimeters require: 1) A service perimeter that includes the project and services, 2) Access levels that define allowed client attributes (e.g., IP addresses, device policy), and 3) VPC accessible services configuration to restrict access to only requests originating from specified VPC networks. Ingress rules are optional for allowing access from outside the perimeter.

Answer

Cloud NAT gateway

Answer

Private Google Access

Question 2

A company wants to expose a web application running on Cloud Run to the internet with a single global IP address, SSL termination, and Cloud CDN. Which load balancer should they use?

Accepted Answer

Global External HTTP(S) Load Balancer. The Global HTTPS Load Balancer supports serverless backends via serverless NEG, provides SSL termination, Cloud CDN integration, and a single global IP address. The others are either regional or not suitable for serverless backends.

Answer

External TCP/UDP Network Load Balancer

Answer

Global TCP Proxy Load Balancer

Answer

Regional External HTTP(S) Load Balancer

Question 3

An organization needs to design a hybrid connectivity solution with 99.99% availability for a mission-critical application. They have a co-location facility near a GCP region. Which THREE components are required to meet this SLA?

Accepted Answer

Two VLAN attachments. For 99.99% SLA with Dedicated Interconnect, you need two links in different edge availability domains, two VLAN attachments, and BGP sessions with Cloud Router.

Answer

One Dedicated Interconnect link with multiple VLAN attachments

Answer

Classic VPN as a backup

Question 4

A company has two VPCs in the same project: VPC-A (10.0.0.0/16) and VPC-B (10.1.0.0/16). They want to allow SSH from VPC-A to instances in VPC-B. The network admin creates a firewall rule with source range 10.0.0.0/16 and protocol tcp:22, but connectivity fails. What is the most likely cause?

Accepted Answer

The rule is created in VPC-A instead of VPC-B.. Firewall rules in Google Cloud are applied at the network level, not the instance level. To allow inbound SSH traffic from VPC-A to instances in VPC-B, the firewall rule must be created in VPC-B (the destination network) with the source range set to 10.0.0.0/16. Creating the rule in VPC-A would only affect traffic destined for instances in VPC-A, not VPC-B.

Answer

The source range should be 10.0.0.0/8.

Answer

The target tag is not specified.

Answer

The source tag is missing.

Question 5

A developer needs to create a subnet for GKE pods that will be used by a cluster. They need to specify a secondary IP range for pods. What is the purpose of the 'purpose' field when creating a subnet?

Accepted Answer

It indicates the subnet is used for GKE pods or services. The purpose field determines the subnet's usage; for GKE pods, you set purpose to 'PRIVATE_RFC_1918' or use a secondary range with specific purpose.

Answer

It enables private Google access

Answer

It defines whether the subnet is auto or custom

Answer

It sets the region for the subnet

Question 6

A network engineer is troubleshooting connectivity issues between two Compute Engine instances in the same VPC but different subnets (us-east1 and europe-west1). The engineer suspects an MTU issue. What is the default MTU for traffic within Google Cloud, and what MTU should the engineer expect when packets traverse the internet?

Accepted Answer

1460 bytes internally, 1500 bytes internet. Google Cloud uses an MTU of 1460 bytes (64 bytes less than the standard 1500) to accommodate encapsulation headers. Internet traffic typically uses 1500 bytes. Fragmentation can occur if a packet larger than 1460 bytes is sent over a path that expects 1500 but the internal path is 1460.

Answer

1400 bytes internally, 1500 bytes internet

Answer

1500 bytes both internally and internet

Answer

1500 bytes internally, 1460 bytes internet

Question 7

A network engineer configured a Cloud Router with the BGP configuration shown. The on-premises router (AS 64512) is peering with the Cloud Router (AS 65001) over a Dedicated Interconnect VLAN attachment. The engineer notices that traffic from on-premises to Google Cloud is not being routed via this interconnect as expected. What is the most likely cause?

Accepted Answer

The update-source loopback0 command is invalid for Cloud Router BGP sessions. Cloud Router does not support the `update-source loopback0` command. BGP sessions on Cloud Router must use the primary IP address of the interface that is directly connected to the VLAN attachment; loopback interfaces are not supported for BGP peering. This command would cause the Cloud Router to attempt to source BGP packets from a loopback address that is not reachable by the on-premises router, breaking the BGP session.

Answer

The route-map SET-MED sets the MED attribute incorrectly

Answer

The ebgp-multihop 2 command is not supported on Cloud Router

Answer

The local-preference is set in the outbound direction, which is not allowed

Question 8

An organization has a Shared VPC with several service projects. They want to restrict which service projects can create firewall rules in the host project. What should they do?

Accepted Answer

Use IAM roles with compute.firewalls.create permission at the host project level.. IAM roles with the `compute.firewalls.create` permission at the host project level allow you to precisely control which service projects can create firewall rules in the Shared VPC host project. By assigning a custom or predefined role (e.g., Compute Security Admin) that includes this permission to specific service project identities, you can restrict firewall rule creation to only authorized service projects while preventing others from doing so.

Answer

Use VPC Service Controls.

Answer

Use hierarchical firewall policies.

Answer

Use organization policies to deny firewall rule creation.

Question 9

A company is using Cloud VPN to connect to Google Cloud. They notice that traffic from their on-premises network to Google Cloud is not being routed correctly after a recent change. On the on-premises router, they verify that the BGP session is established and routes are received. Which step should they take next to troubleshoot?

Accepted Answer

Verify that the routes learned via BGP are being propagated to the VPC network by examining Cloud Router details. Since the BGP session is established and routes are received on the on-premises router, the issue is likely that those routes are not being propagated into the VPC network. Cloud Router acts as the BGP speaker for the VPC; even if the VPN tunnel is up and BGP peering is successful, the learned routes must be advertised into the VPC’s routing tables. Verifying Cloud Router details (e.g., using `gcloud compute routers get-status` or checking the Cloud Console) confirms whether the routes are being accepted and propagated, which directly addresses the routing failure.

Answer

Check the on-premises firewall logs

Answer

Disable and re-enable the VPN tunnel

Answer

Check the tunnel status in Cloud Console

Question 10

A company is designing a hybrid network with Cloud VPN. Which TWO best practices should they follow? (Choose TWO.)

Accepted Answer

Use pre-shared keys for authentication.. Pre-shared keys (PSKs) are a valid and commonly used authentication method for IPsec VPN tunnels in Google Cloud. They provide a simple, symmetric key-based mechanism to authenticate the VPN peers without requiring a PKI infrastructure, making them a best practice for straightforward deployments.

Answer

Use a VPN tunnel per subnet.

Answer

Use static routes for simplicity.

Answer

Use a single VPN tunnel for all traffic.

Question 11

A company has deployed a globally distributed application on Google Cloud using Cloud Load Balancing and managed instance groups across multiple regions. They need to restrict access to the application's backend instances so that only traffic from the load balancer's health check ranges and the load balancer's source IP addresses is allowed. Which firewall rule configuration should be used?

Accepted Answer

Create an ingress firewall rule that allows traffic from the load balancer's health check ranges and uses a service account filter to allow traffic from the cloud-services service account (used by the load balancer).. It uses a service account filter to allow traffic from the cloud-services service account, which is the identity used by Cloud Load Balancing to forward traffic to backend instances. This ensures that only traffic originating from the load balancer (including health check probes) is permitted, while also automatically covering the health check ranges (35.191.0.0/16, 130.211.0.0/22) without needing to hardcode IP ranges. This approach is more secure and scalable than IP-based rules, as it avoids the risk of IP range changes and provides identity-based access control.

Answer

Create an ingress firewall rule allowing all traffic from 0.0.0.0/0 with a target tag applied to the backend instances.

Answer

Create an ingress firewall rule that denies all traffic except from the load balancer's frontend IP address.

Answer

Create an ingress firewall rule allowing traffic from the health check ranges (35.191.0.0/16, 130.211.0.0/22) and the load balancer's source IP ranges (e.g., 130.211.0.0/22) to the backend instances.

Question 12

An organization wants to connect its on-premises data center to Google Cloud using Dedicated Interconnect. They require 99.99% availability SLA. Which configuration meets this requirement?

Accepted Answer

Two 10Gbps Dedicated Interconnect connections, each with its own VLAN attachment and BGP session, from the same provider. Dedicated Interconnect offers 99.99% SLA when you have two separate physical connections (each 10Gbps or 100Gbps) from the same provider, each with its own VLAN attachment and BGP session, and they are configured in a redundant manner.

Answer

A single 10Gbps Dedicated Interconnect connection with one VLAN attachment and one BGP session

Answer

A single 100Gbps Dedicated Interconnect connection with two VLAN attachments and two BGP sessions

Answer

Two Partner Interconnect connections with 99.9% SLA each

Question 13

A network engineer is designing a hybrid cloud architecture connecting an on-premises data center to Google Cloud via Dedicated Interconnect. The on-premises network uses BGP for dynamic routing. The engineer needs to configure Cloud Router to exchange routes with the on-premises router. Which two configuration steps are required? (Choose two.)

Accepted Answer

Enable the BGP session on the Cloud Router and configure the peer IP address and ASN.. Cloud Router uses BGP to dynamically exchange routes with the on-premises router over Dedicated Interconnect. Enabling the BGP session requires configuring the peer IP address (the on-premises router's interface IP) and the on-premises ASN, which allows the two routers to establish a BGP peering and exchange prefixes.

Answer

Configure a static route in Google Cloud VPC with the on-premises prefix.

Answer

Assign a primary and secondary IP range to the Cloud Router interface.

Answer

Configure the Cloud Router with the same ASN as the on-premises router.

Question 14

A team is configuring a Cloud Router for a Dedicated Interconnect VLAN attachment. They need to set up BGP sessions. Which of the following is a required parameter when creating a BGP peer on the Cloud Router?

Accepted Answer

Peer ASN. The peer ASN is required to configure the BGP session; the Cloud Router ASN is set at the router level.

Answer

Route priority (MED)

Answer

VLAN ID

Answer

Peer IP address

Question 15

A developer wants to use Cloud CDN to cache static assets from an external origin (not a GCP bucket). Which backend type supports this?

Accepted Answer

Internet NEG. Internet NEG allows specifying an external FQDN as a backend, enabling Cloud CDN to cache content from external origins. Backend buckets are for GCS. Serverless NEG is for Cloud Run/Functions/App Engine. Zonal NEG is for GCP VMs/containers.

Answer

Backend bucket

Answer

Serverless NEG

Answer

Zonal NEG

Question 16

What is the maximum number of VLAN attachments that can be configured on a single 10 Gbps Dedicated Interconnect connection?

Accepted Answer

8. A single 10 Gbps Dedicated Interconnect connection supports a maximum of 8 VLAN attachments. This limit is defined by Google Cloud's interconnect architecture, where each VLAN attachment consumes a portion of the 10 Gbps bandwidth and is mapped to a unique VLAN ID. The 8-attachment cap ensures predictable performance and avoids oversubscription on the physical link.

Answer

16

Answer

4

Answer

2

Question 17

You are using Cloud CDN with a backend bucket and want to cache all responses regardless of Cache-Control headers. Which cache mode should you set?

Accepted Answer

FORCE_CACHE_ALL. FORCE_CACHE_ALL overrides origin Cache-Control headers and caches all responses. CACHE_ALL_STATIC attempts to cache static content but respects Cache-Control. USE_ORIGIN_HEADERS respects origin headers.

Answer

CACHE_ALL_STATIC

Answer

USE_ORIGIN_HEADERS

Answer

DISABLED

Question 18

A security team wants to allow traffic from a specific set of VMs with service account 'web-sa@project.iam.gserviceaccount.com' to access a database VM with tag 'db'. The VMs are in the same VPC. Which firewall rule configuration achieves this?

Accepted Answer

Ingress rule: allow tcp:3306, source service account 'web-sa', target tags 'db'. It defines an ingress firewall rule that allows TCP traffic on port 3306 (MySQL) from VMs using the service account 'web-sa@project.iam.gserviceaccount.com' as the source, targeting VMs with the network tag 'db'. In GCP VPC firewall rules, source service accounts can be used to filter traffic based on the identity of the source VM, while target tags apply the rule to destination VMs that have the specified tag, enabling identity-based access control without relying on IP addresses.

Answer

Ingress rule: allow tcp:3306, source IP range 10.0.0.0/8, target tags 'db'

Answer

Ingress rule: allow tcp:3306, source tags 'web', target service account 'db-sa'

Answer

Egress rule: allow tcp:3306, source service account 'web-sa', target tags 'db'

Question 19

A developer needs to create a GKE cluster that uses a secondary IP range for pods and another for services. During VPC subnet creation, they set a primary IP range and two secondary ranges. Which flag must be used when creating the subnet to specify the pods range?

Accepted Answer

--secondary-range. When creating a subnet with secondary IP ranges, the '--secondary-range' flag is used to specify the name and range for pods (or services). The CLI command allows multiple secondary ranges.

Answer

--pods-range

Answer

--additional-ip-range

Answer

--auxiliary-range

Question 20

Match each VPC networking concept to its definition.

Accepted Answer

VPC: A global virtual network that spans all regions.. VPC is global, subnets are regional. Firewall rules filter traffic, routes determine paths. Common confusions: swapping global/regional or filtering/routing.

Answer

Subnet: A global resource used for IP address management.

Answer

Routes: A set of rules that control traffic based on source and destination.