Question 1mediummultiple choice
Read the full wireless explanation →100-140 Help Desk • Complete Question Bank
Complete 100-140 Help Desk question bank — all 0 questions with answers and detailed explanations.
Switch# show spanning-tree vlan 10
VLAN0010
Spanning tree enabled protocol ieee
Root ID Priority 32768
Address 0011.2233.4455
Cost 4
Port 1 (GigabitEthernet0/1)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address aabb.ccdd.eeff
Cost 4
Port 2 (GigabitEthernet0/2)
Hello Time VLAN0010Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds: .!!.. Success rate is 40 percent (2/5), round-trip min/avg/max = 1/2/4 ms
FastEthernet0/1 is up, line protocol is up
Full-duplex, 100Mb/s, 100BaseTX/FX
...
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
321 output errors, 105 collisions, 0 interface resetsBuildingA-Switch# show ip interface brief Interface IP-Address OK? Method Status Protocol Vlan1 192.168.1.10 YES manual up up FastEthernet0/1 unassigned YES unset down down FastEthernet0/2 192.168.2.1 YES manual up up FastEthernet0/3 unassigned YES unset down down
Jul 14 10:22:15.432: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down Jul 14 10:22:16.433: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down