Question 48 of 511
vSphere Architecture, Products and SolutionshardMultiple SelectObjective-mapped

Quick Answer

The answer is that vSphere Enhanced vMotion Compatibility (EVC) masks CPU features to a baseline level across all hosts in the cluster. This works by presenting a common set of CPU instruction sets to virtual machines, effectively hiding the differences between older and newer processor generations so that VMs can migrate seamlessly via vMotion without encountering compatibility errors. On the VMware Certified Professional Data Center Virtualization VCP-DCV exam, this concept tests your understanding of how EVC enables cluster-wide workload mobility while avoiding the trap of confusing it with memory-related features or assuming it requires VMs to be powered off—EVC can be enabled with running VMs, though a brief compatibility check occurs. A common memory tip is to think of EVC as a “CPU mask” that levels the playing field across hosts, not a per-host setting but a cluster-wide baseline.

VCP-DCV vSphere Architecture, Products and Solutions Practice Question

This VCP-DCV practice question tests your understanding of vsphere architecture, products and solutions. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Which two of the following are characteristics of the vSphere Enhanced vMotion Compatibility (EVC) feature? (Choose two.)

Question 1hardmulti select
Read the full NAT/PAT explanation →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

It allows vMotion between hosts of different CPU generations within the same cluster

Options B and C are correct. EVC masks CPU features to ensure compatibility across hosts of different generations. Option A is incorrect because EVC does not affect memory. Option D is incorrect because EVC does not require manual power-off; you can enable EVC with VMs powered on. Option E is incorrect because EVC is per-cluster, not per-host.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • It is configured at the host level

    Why it's wrong here

    EVC is a cluster-level setting.

  • It allows vMotion between hosts of different CPU generations within the same cluster

    Why this is correct

    EVC enables vMotion across different CPU generations by masking features.

    Related concept

    CIDR notation defines the prefix length.

  • It enables memory overcommit by default

    Why it's wrong here

    EVC does not control memory overcommit.

  • It masks CPU features to a baseline level across all hosts in the cluster

    Why this is correct

    EVC presents a unified CPU feature set.

    Related concept

    CIDR notation defines the prefix length.

  • It requires all VMs to be powered off before enabling

    Why it's wrong here

    EVC can be enabled while VMs are powered on.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

  • CIDR notation defines the prefix length.
  • Block size helps identify subnet boundaries.
  • Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
  • The required host count determines the smallest suitable subnet.

TExam Day Tips

  • Write the block size before choosing the subnet.
  • Check whether the question asks for hosts, subnets or a specific address range.
  • Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related VCP-DCV subnetting questions on CIDR, address ranges, and subnet selection.

Related practice questions

Related VCP-DCV practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free VCP-DCV practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this VCP-DCV question test?

vSphere Architecture, Products and Solutions — This question tests vSphere Architecture, Products and Solutions — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: It allows vMotion between hosts of different CPU generations within the same cluster — Options B and C are correct. EVC masks CPU features to ensure compatibility across hosts of different generations. Option A is incorrect because EVC does not affect memory. Option D is incorrect because EVC does not require manual power-off; you can enable EVC with VMs powered on. Option E is incorrect because EVC is per-cluster, not per-host.

What should I do if I get this VCP-DCV question wrong?

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related VCP-DCV subnetting questions on CIDR, address ranges, and subnet selection.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 24, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This VCP-DCV practice question is part of Courseiva's free VMware certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the VCP-DCV exam.