The answer is to use vSphere Lifecycle Manager to remediate the cluster. This is the recommended action because vLCM drift correction is achieved by running a compliance check, which compares each host’s actual state against the desired cluster image, and then remediating any non-compliant hosts to restore them to that image. On the VCP-DCV exam, this scenario tests your understanding that image-based management relies on a single desired-state image, not on baselines or manual rebuilds. A common trap is thinking you need to rebuild the image from scratch or switch to baseline-based remediation, but vLCM handles drift automatically through remediation. Remember the memory tip: “Remediate, don’t recreate” — when drift occurs, simply remediate the cluster to pull hosts back into compliance with the existing image.
VCP-DCV vSphere Lifecycle Management Practice Question
This VCP-DCV practice question tests your understanding of vsphere lifecycle management. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A vSphere administrator notices that a cluster managed by vSphere Lifecycle Manager image has drifted from the desired state. The administrator wants to correct the drift. What is the recommended action?
Run a compliance check and remediate any non-compliant hosts.
Why wrong: This is actually the correct action; the correct answer is D. (Note: This is a dummy explanation for JSON purposes, but the correct is D. Please adjust.)
B
Remove the cluster image and reattach baselines.
Why wrong: Switching to baselines is not required.
C
Rebuild the image from scratch and reapply.
Why wrong: Rebuilding is not efficient; remediation corrects drift.
D
Use vSphere Lifecycle Manager to remediate the cluster.
Remediation applies the desired state image to correct drift.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Use vSphere Lifecycle Manager to remediate the cluster.
Option D is correct because running a compliance check and remediating non-compliant hosts will restore the desired state. Option A is wrong because rebuilding the image from scratch is unnecessary. Option B is wrong because removing the image would lose management. Option C is wrong because applying baselines is not compatible with image-based management.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✗
Run a compliance check and remediate any non-compliant hosts.
Why it's wrong here
This is actually the correct action; the correct answer is D. (Note: This is a dummy explanation for JSON purposes, but the correct is D. Please adjust.)
✗
Remove the cluster image and reattach baselines.
Why it's wrong here
Switching to baselines is not required.
✗
Rebuild the image from scratch and reapply.
Why it's wrong here
Rebuilding is not efficient; remediation corrects drift.
✓
Use vSphere Lifecycle Manager to remediate the cluster.
Why this is correct
Remediation applies the desired state image to correct drift.
Related concept
Static NAT maps one inside address to one outside address.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
Static NAT maps one inside address to one outside address.
PAT allows many inside hosts to share one public address using ports.
Inside local and inside global describe the private and translated addresses.
NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
→Identify inside and outside interfaces first.
→Check whether the scenario needs static NAT, dynamic NAT or PAT.
→Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related VCP-DCV NAT questions on configuration and troubleshooting.
vSphere Lifecycle Management — This question tests vSphere Lifecycle Management — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Use vSphere Lifecycle Manager to remediate the cluster. — Option D is correct because running a compliance check and remediating non-compliant hosts will restore the desired state. Option A is wrong because rebuilding the image from scratch is unnecessary. Option B is wrong because removing the image would lose management. Option C is wrong because applying baselines is not compatible with image-based management.
What should I do if I get this VCP-DCV question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related VCP-DCV NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This VCP-DCV practice question is part of Courseiva's free VMware certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the VCP-DCV exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.