- A
Configure HA1 and HA2 interfaces with appropriate IPs
Why wrong: Interfaces are required for HA communication, but they don't enable session sync.
- B
Enable Config Sync on the HA General tab
Why wrong: Config Sync synchronizes configuration, not active session states.
- C
Enable Session Setup and State Synchronization under HA configuration
These settings enable the synchronization of session state information between HA peers.
- D
Configure Path Monitoring to detect link failures
Why wrong: Path monitoring triggers failover but does not synchronize sessions.
Question 328 of 529
PCNSA Device Management and Services Practice Question
This PCNSA practice question tests your understanding of device management and services. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An organization is deploying a firewall in a high-availability (HA) pair. The administrator wants to ensure that session state is synchronized between the firewalls so that active sessions are not dropped during failover. Which configuration is required?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enable Session Setup and State Synchronization under HA configuration
Option C is correct because session state synchronization (also known as stateful failover) requires enabling both Session Setup and State Synchronization under the HA configuration. This ensures that the active firewall's session table is continuously replicated to the passive firewall, so when a failover occurs, existing sessions are not dropped and can continue without interruption.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Configure HA1 and HA2 interfaces with appropriate IPs
Why it's wrong here
Interfaces are required for HA communication, but they don't enable session sync.
- ✗
Enable Config Sync on the HA General tab
Why it's wrong here
Config Sync synchronizes configuration, not active session states.
- ✓
Enable Session Setup and State Synchronization under HA configuration
Why this is correct
These settings enable the synchronization of session state information between HA peers.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Configure Path Monitoring to detect link failures
Why it's wrong here
Path monitoring triggers failover but does not synchronize sessions.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates confuse Config Sync (which synchronizes configuration files) with Session State Synchronization (which synchronizes active session data), leading them to select Option B instead of C.
Detailed technical explanation
How to think about this question
Session state synchronization uses a proprietary protocol over the HA2 (data link) interface to mirror the session table in real time. Each session's state (TCP sequence numbers, NAT bindings, application signatures) is serialized and sent as a state update packet; if the update rate exceeds the link capacity, sessions may be dropped during failover. In a real-world scenario, high-throughput environments (e.g., 100,000+ concurrent sessions) require careful tuning of the HA2 link speed and MTU to avoid state synchronization lag.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the PCNSA exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Device Management and Services — study guide chapter
Learn the concepts, then practise the questions
- →
Device Management and Services practice questions
Targeted practice on this topic area only
- →
All PCNSA questions
529 questions across all exam domains
- →
Palo Alto Networks Certified Network Security Administrator PCNSA study guide
Full concept coverage aligned to exam objectives
- →
PCNSA practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PCNSA practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Managing Objects practice questions
Practise PCNSA questions linked to Managing Objects.
Policy Evaluation and Management practice questions
Practise PCNSA questions linked to Policy Evaluation and Management.
Securing Traffic practice questions
Practise PCNSA questions linked to Securing Traffic.
Core Concepts practice questions
Practise PCNSA questions linked to Core Concepts.
Palo Alto Networks Platforms and Architecture practice questions
Practise PCNSA questions linked to Palo Alto Networks Platforms and Architecture.
Device Management and Services practice questions
Practise PCNSA questions linked to Device Management and Services.
App-ID and Content-ID practice questions
Practise PCNSA questions linked to App-ID and Content-ID.
Decryption and Monitoring practice questions
Practise PCNSA questions linked to Decryption and Monitoring.
PCNSA fundamentals practice questions
Practise PCNSA questions linked to PCNSA fundamentals.
PCNSA scenario practice questions
Practise PCNSA questions linked to PCNSA scenario.
PCNSA troubleshooting practice questions
Practise PCNSA questions linked to PCNSA troubleshooting.
Practice this exam
Start a free PCNSA practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNSA question test?
Device Management and Services — This question tests Device Management and Services — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Enable Session Setup and State Synchronization under HA configuration — Option C is correct because session state synchronization (also known as stateful failover) requires enabling both Session Setup and State Synchronization under the HA configuration. This ensures that the active firewall's session table is continuously replicated to the passive firewall, so when a failover occurs, existing sessions are not dropped and can continue without interruption.
What should I do if I get this PCNSA question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More PCNSA practice questions
- A security rule is configured with source zone 'Trust', destination zone 'Untrust', source address 'any', destination ad…
- A user at 192.168.1.10 attempts to access a social networking site (application: social-networking). Based on the exhibi…
- Drag and drop the steps to configure a VLAN interface on a Palo Alto Networks firewall into the correct order.
- A network engineer is troubleshooting a drop in traffic from a critical application. The traffic is allowed by the secur…
- A company has a PA-5250 firewall in an active/passive HA pair. During a maintenance window, the administrator upgrades t…
- A company has a firewall configured with multiple virtual routers. A user on a trusted network can ping the firewall's m…
Last reviewed: Jun 11, 2026
This PCNSA practice question is part of Courseiva's free Palo Alto Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNSA exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.