- A
Create a deny rule for external IP addresses, then an allow rule for internal.
Why wrong: If the deny rule matches external IPs first, it is fine; but if the external IP range is broad, it might also match internal if not careful. More importantly, the allow rule for internal must be before the deny to ensure internal traffic is not denied.
- B
Place the allow rule after the deny rule.
Why wrong: If the deny rule is first, it would block all traffic, including internal, before reaching the allow rule.
- C
Create an allow rule for internal source addresses, then a deny rule for any source.
Internal traffic is allowed by the first rule, and all other (external) traffic is denied by the second rule.
- D
Create a single rule with a 'Deny' action and apply a user-ID condition.
Why wrong: User-ID is for user-based policies, and a single deny rule would block all, not just external.
Quick Answer
The answer is to create an allow rule for internal source addresses, then a deny rule for any source. This structure works because Palo Alto Networks firewalls evaluate security rules from the top down, so the specific allow for internal traffic is matched first, and the subsequent catch-all deny blocks everything else, including external IPs. On the PCNSA exam, this tests your understanding of rule ordering and source-based access control, a common trap being that a broad deny rule placed before the allow will block all traffic, including internal users. A reliable memory tip is "specific allow first, then deny the rest," ensuring internal external access control is enforced correctly without disrupting legitimate traffic.
PCNSA Policy Evaluation and Management Practice Question
This PCNSA practice question tests your understanding of policy evaluation and management. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company needs to restrict access to a critical server from external IP addresses, but internal users should have full access. Which rule structure should be used?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Create an allow rule for internal source addresses, then a deny rule for any source.
Option A is correct because rules are evaluated top-down; placing the internal allow rule first ensures internal traffic is allowed, and then external traffic is denied by the second rule. Option B is wrong because denying external first would also deny internal traffic if it matches the deny rule (if source IP ranges overlap). Option C is wrong because using a single rule cannot differentiate between internal and external sources easily. Option D is wrong because reverse order would allow external if it matches allow rule.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Create a deny rule for external IP addresses, then an allow rule for internal.
Why it's wrong here
If the deny rule matches external IPs first, it is fine; but if the external IP range is broad, it might also match internal if not careful. More importantly, the allow rule for internal must be before the deny to ensure internal traffic is not denied.
- ✗
Place the allow rule after the deny rule.
Why it's wrong here
If the deny rule is first, it would block all traffic, including internal, before reaching the allow rule.
- ✓
Create an allow rule for internal source addresses, then a deny rule for any source.
Why this is correct
Internal traffic is allowed by the first rule, and all other (external) traffic is denied by the second rule.
Related concept
Standard ACLs match source addresses.
- ✗
Create a single rule with a 'Deny' action and apply a user-ID condition.
Why it's wrong here
User-ID is for user-based policies, and a single deny rule would block all, not just external.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related PCNSA ACL questions on filtering logic and placement.
- →
Policy Evaluation and Management — study guide chapter
Learn the concepts, then practise the questions
- →
Policy Evaluation and Management practice questions
Targeted practice on this topic area only
- →
All PCNSA questions
524 questions across all exam domains
- →
Palo Alto Networks Certified Network Security Administrator PCNSA study guide
Full concept coverage aligned to exam objectives
- →
PCNSA practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PCNSA practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Managing Objects practice questions
Practise PCNSA questions linked to Managing Objects.
Policy Evaluation and Management practice questions
Practise PCNSA questions linked to Policy Evaluation and Management.
Securing Traffic practice questions
Practise PCNSA questions linked to Securing Traffic.
Core Concepts practice questions
Practise PCNSA questions linked to Core Concepts.
Palo Alto Networks Platforms and Architecture practice questions
Practise PCNSA questions linked to Palo Alto Networks Platforms and Architecture.
Device Management and Services practice questions
Practise PCNSA questions linked to Device Management and Services.
App-ID and Content-ID practice questions
Practise PCNSA questions linked to App-ID and Content-ID.
Decryption and Monitoring practice questions
Practise PCNSA questions linked to Decryption and Monitoring.
PCNSA fundamentals practice questions
Practise PCNSA questions linked to PCNSA fundamentals.
PCNSA scenario practice questions
Practise PCNSA questions linked to PCNSA scenario.
PCNSA troubleshooting practice questions
Practise PCNSA questions linked to PCNSA troubleshooting.
Practice this exam
Start a free PCNSA practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNSA question test?
Policy Evaluation and Management — This question tests Policy Evaluation and Management — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: Create an allow rule for internal source addresses, then a deny rule for any source. — Option A is correct because rules are evaluated top-down; placing the internal allow rule first ensures internal traffic is allowed, and then external traffic is denied by the second rule. Option B is wrong because denying external first would also deny internal traffic if it matches the deny rule (if source IP ranges overlap). Option C is wrong because using a single rule cannot differentiate between internal and external sources easily. Option D is wrong because reverse order would allow external if it matches allow rule.
What should I do if I get this PCNSA question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related PCNSA ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This PCNSA practice question is part of Courseiva's free Palo Alto Networks certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNSA exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.