- A
The Microsoft 365 data connector in Microsoft Sentinel is enabled and configured to collect DLP alerts.
This connector ingests DLP alerts.
- B
The SharePoint site is configured for external sharing.
Why wrong: Irrelevant to ingestion.
- C
The DLP policy must be set to 'Audit only' mode.
Why wrong: Audit mode still generates alerts, but not the ingestion side.
- D
The unified audit log is enabled and the DLP events are being generated.
Why wrong: Audit log is needed but not sufficient; need the connector.
Question 639 of 1,639
SC-200 Manage a security operations environment Practice Question
This SC-200 practice question tests your understanding of manage a security operations environment. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Your organization uses Microsoft Purview Data Loss Prevention (DLP) policies. You need to investigate an incident where sensitive data was shared externally. You want to view the details in Microsoft Sentinel. What should you ensure is configured?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The Microsoft 365 data connector in Microsoft Sentinel is enabled and configured to collect DLP alerts.
Option A is correct because Microsoft Sentinel's Microsoft 365 data connector ingests unified audit logs from Microsoft Purview, including DLP alerts. When this connector is enabled and configured to collect DLP alerts, Sentinel can receive and surface the incident details, allowing investigation of externally shared sensitive data. Without this connector, DLP events remain in the Purview compliance portal and are not forwarded to Sentinel.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The Microsoft 365 data connector in Microsoft Sentinel is enabled and configured to collect DLP alerts.
Why this is correct
This connector ingests DLP alerts.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The SharePoint site is configured for external sharing.
Why it's wrong here
Irrelevant to ingestion.
- ✗
The DLP policy must be set to 'Audit only' mode.
Why it's wrong here
Audit mode still generates alerts, but not the ingestion side.
- ✗
The unified audit log is enabled and the DLP events are being generated.
Why it's wrong here
Audit log is needed but not sufficient; need the connector.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often assume enabling the unified audit log (Option D) is sufficient for Sentinel to receive DLP alerts, but they overlook that the Microsoft 365 data connector must be specifically configured to collect DLP events, as the connector acts as the bridge between the audit log and Sentinel.
Detailed technical explanation
How to think about this question
The Microsoft 365 data connector in Sentinel uses the Office 365 Management Activity API to pull audit records from the unified audit log. DLP alerts are surfaced as 'DLPRuleMatch' events in the audit log, and the connector must have the 'DLP' data type selected in its configuration to ingest these events. In a real-world scenario, if the connector is enabled but the DLP data type is not selected, DLP incidents will not appear in Sentinel, leading to missed investigations.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Manage a security operations environment — study guide chapter
Learn the concepts, then practise the questions
- →
Manage a security operations environment practice questions
Targeted practice on this topic area only
- →
All SC-200 questions
1,639 questions across all exam domains
- →
Microsoft Security Operations Analyst SC-200 study guide
Full concept coverage aligned to exam objectives
- →
SC-200 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related SC-200 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Manage a security operations environment practice questions
Practise SC-200 questions linked to Manage a security operations environment.
Respond to security incidents practice questions
Practise SC-200 questions linked to Respond to security incidents.
Perform threat hunting practice questions
Practise SC-200 questions linked to Perform threat hunting.
Mitigate threats using Microsoft Defender XDR practice questions
Practise SC-200 questions linked to Mitigate threats using Microsoft Defender XDR.
Mitigate threats using Microsoft Defender for Cloud practice questions
Practise SC-200 questions linked to Mitigate threats using Microsoft Defender for Cloud.
Mitigate threats using Microsoft Sentinel practice questions
Practise SC-200 questions linked to Mitigate threats using Microsoft Sentinel.
SC-200 fundamentals practice questions
Practise SC-200 questions linked to SC-200 fundamentals.
SC-200 scenario practice questions
Practise SC-200 questions linked to SC-200 scenario.
SC-200 troubleshooting practice questions
Practise SC-200 questions linked to SC-200 troubleshooting.
Practice this exam
Start a free SC-200 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this SC-200 question test?
Manage a security operations environment — This question tests Manage a security operations environment — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The Microsoft 365 data connector in Microsoft Sentinel is enabled and configured to collect DLP alerts. — Option A is correct because Microsoft Sentinel's Microsoft 365 data connector ingests unified audit logs from Microsoft Purview, including DLP alerts. When this connector is enabled and configured to collect DLP alerts, Sentinel can receive and surface the incident details, allowing investigation of externally shared sensitive data. Without this connector, DLP events remain in the Purview compliance portal and are not forwarded to Sentinel.
What should I do if I get this SC-200 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More SC-200 practice questions
- Which TWO are valid sources of evidence in a Microsoft Sentinel incident? (Choose two.)
- An organization uses Microsoft 365 Defender. During an incident, the analyst wants to automatically isolate a compromise…
- Which THREE steps are part of the incident response process when using Microsoft Sentinel?
- Refer to the exhibit. You are reviewing a Microsoft Sentinel scheduled analytics rule configured as above. An incident w…
- A security analyst is preparing to use a Jupyter notebook for threat hunting in Microsoft Sentinel. Which of the followi…
- You are investigating a ransomware incident in Microsoft Sentinel. The incident contains multiple alerts. You need to gr…
Last reviewed: Jul 4, 2026
This SC-200 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SC-200 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.