- A
Assign an external IP to each interface
Why wrong: External IPs are not required; the appliance can use internal IPs.
- B
Attach at least two network interfaces (NIC0 and NIC1)
Required to connect to two different VPCs.
- C
Use the same subnet for both interfaces
Why wrong: Each interface must be in a different subnet (and typically different VPC) to route between VPCs.
- D
Configure static routes in both VPCs pointing to the appliance's IP
Required for traffic in each VPC to be directed to the appliance for inspection.
- E
Enable IP forwarding on the instance
Required for the instance to forward traffic between its interfaces.
Question 816 of 982
PCNE Implementing VPC Instances Practice Question
This PCNE practice question tests your understanding of implementing vpc instances. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company wants to deploy a network appliance (e.g., firewall) on a Compute Engine instance that requires inspecting traffic between two VPCs. The instance must have interfaces in both VPCs. Which three configurations are required? (Choose three.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Attach at least two network interfaces (NIC0 and NIC1)
For a multi-NIC network appliance, you need at least two network interfaces (NIC0, NIC1) attached to different VPCs. Each interface must be in a different subnet. Also, IP forwarding must be enabled on the instance to allow it to forward traffic between interfaces.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Assign an external IP to each interface
Why it's wrong here
External IPs are not required; the appliance can use internal IPs.
- ✓
Attach at least two network interfaces (NIC0 and NIC1)
Why this is correct
Required to connect to two different VPCs.
Related concept
CIDR notation defines the prefix length.
- ✗
Use the same subnet for both interfaces
Why it's wrong here
Each interface must be in a different subnet (and typically different VPC) to route between VPCs.
- ✓
Configure static routes in both VPCs pointing to the appliance's IP
Why this is correct
Required for traffic in each VPC to be directed to the appliance for inspection.
Related concept
CIDR notation defines the prefix length.
- ✓
Enable IP forwarding on the instance
Why this is correct
Required for the instance to forward traffic between its interfaces.
Related concept
CIDR notation defines the prefix length.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
An e-commerce site experiences heavy traffic on Black Friday and near-zero traffic during off-peak weeks. Rather than provisioning permanent large VMs, the team uses auto-scaling groups that add capacity automatically under load and reduce it overnight. Questions like this test whether you understand elasticity, availability zones, and cloud compute scaling patterns.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PCNE subnetting questions on CIDR, address ranges, and subnet selection.
- →
Implementing VPC Instances — study guide chapter
Learn the concepts, then practise the questions
- →
Implementing VPC Instances practice questions
Targeted practice on this topic area only
- →
All PCNE questions
982 questions across all exam domains
- →
Google Professional Cloud Network Engineer study guide
Full concept coverage aligned to exam objectives
- →
PCNE practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PCNE practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuring Network Services practice questions
Practise PCNE questions linked to Configuring Network Services.
Implementing Hybrid Interconnectivity practice questions
Practise PCNE questions linked to Implementing Hybrid Interconnectivity.
Managing, Monitoring, and Optimising Network Operations practice questions
Practise PCNE questions linked to Managing, Monitoring, and Optimising Network Operations.
Designing, Planning, and Prototyping a GCP Network practice questions
Practise PCNE questions linked to Designing, Planning, and Prototyping a GCP Network.
Implementing VPC Instances practice questions
Practise PCNE questions linked to Implementing VPC Instances.
Implementing network security practice questions
Practise PCNE questions linked to Implementing network security.
Implementing a Virtual Private Cloud practice questions
Practise PCNE questions linked to Implementing a Virtual Private Cloud.
PCNE fundamentals practice questions
Practise PCNE questions linked to PCNE fundamentals.
PCNE scenario practice questions
Practise PCNE questions linked to PCNE scenario.
PCNE troubleshooting practice questions
Practise PCNE questions linked to PCNE troubleshooting.
Practice this exam
Start a free PCNE practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNE question test?
Implementing VPC Instances — This question tests Implementing VPC Instances — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: Attach at least two network interfaces (NIC0 and NIC1) — For a multi-NIC network appliance, you need at least two network interfaces (NIC0, NIC1) attached to different VPCs. Each interface must be in a different subnet. Also, IP forwarding must be enabled on the instance to allow it to forward traffic between interfaces.
What should I do if I get this PCNE question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PCNE subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jul 4, 2026
This PCNE practice question is part of Courseiva's free Google Cloud certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNE exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.