- A
Change the NAT port allocation to static.
Why wrong: Static allocation reserves ports per VM, which could actually worsen exhaustion.
- B
Reduce the endpoint-independent mapping timeout.
Why wrong: This might free ports faster but doesn't address the capacity issue as effectively.
- C
Enable Cloud NAT logging to diagnose the issue.
Why wrong: Logging helps monitor but does not solve port exhaustion.
- D
Increase the number of NAT IP addresses assigned to the Cloud NAT gateway.
More NAT IPs provide more source ports, reducing contention.
Question 264 of 1,000
PCNE Implementing VPC Instances Practice Question
This PCNE practice question tests your understanding of implementing vpc instances. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company is using Cloud NAT to provide outbound internet access for instances without external IPs. They notice that the NAT gateway is running out of ports for connections to a single external IP address. To minimize port exhaustion, what should the engineer configure?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"minimum / minimize"Why it matters: Asks for the least resource use — fewest addresses, smallest subnet, lowest overhead. Eliminate over-provisioned options even if they would technically work.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Increase the number of NAT IP addresses assigned to the Cloud NAT gateway.
Cloud NAT uses NAT IP addresses and ports. To increase capacity for connections to a single destination IP, you can either allocate more NAT IP addresses (which increases the number of ports) or use dynamic port allocation. Static port allocation is used for endpoints that require predictable source ports. For minimizing exhaustion, adding more NAT IPs is the direct solution.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Change the NAT port allocation to static.
Why it's wrong here
Static allocation reserves ports per VM, which could actually worsen exhaustion.
- ✗
Reduce the endpoint-independent mapping timeout.
Why it's wrong here
This might free ports faster but doesn't address the capacity issue as effectively.
- ✗
Enable Cloud NAT logging to diagnose the issue.
Why it's wrong here
Logging helps monitor but does not solve port exhaustion.
- ✓
Increase the number of NAT IP addresses assigned to the Cloud NAT gateway.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PCNE NAT questions on configuration and troubleshooting.
- →
Implementing VPC Instances — study guide chapter
Learn the concepts, then practise the questions
- →
Implementing VPC Instances practice questions
Targeted practice on this topic area only
- →
All PCNE questions
1,000 questions across all exam domains
- →
Google Professional Cloud Network Engineer study guide
Full concept coverage aligned to exam objectives
- →
PCNE practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related PCNE practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuring Network Services practice questions
Practise PCNE questions linked to Configuring Network Services.
Implementing Hybrid Interconnectivity practice questions
Practise PCNE questions linked to Implementing Hybrid Interconnectivity.
Managing, Monitoring, and Optimising Network Operations practice questions
Practise PCNE questions linked to Managing, Monitoring, and Optimising Network Operations.
Designing, Planning, and Prototyping a GCP Network practice questions
Practise PCNE questions linked to Designing, Planning, and Prototyping a GCP Network.
Implementing VPC Instances practice questions
Practise PCNE questions linked to Implementing VPC Instances.
Implementing network security practice questions
Practise PCNE questions linked to Implementing network security.
Implementing a Virtual Private Cloud practice questions
Practise PCNE questions linked to Implementing a Virtual Private Cloud.
PCNE fundamentals practice questions
Practise PCNE questions linked to PCNE fundamentals.
PCNE scenario practice questions
Practise PCNE questions linked to PCNE scenario.
PCNE troubleshooting practice questions
Practise PCNE questions linked to PCNE troubleshooting.
Practice this exam
Start a free PCNE practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNE question test?
Implementing VPC Instances — This question tests Implementing VPC Instances — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Increase the number of NAT IP addresses assigned to the Cloud NAT gateway. — Cloud NAT uses NAT IP addresses and ports. To increase capacity for connections to a single destination IP, you can either allocate more NAT IP addresses (which increases the number of ports) or use dynamic port allocation. Static port allocation is used for endpoints that require predictable source ports. For minimizing exhaustion, adding more NAT IPs is the direct solution.
What should I do if I get this PCNE question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related PCNE NAT questions on configuration and troubleshooting.
Are there clue words in this question I should notice?
Yes — watch for: "minimum / minimize". Asks for the least resource use — fewest addresses, smallest subnet, lowest overhead. Eliminate over-provisioned options even if they would technically work.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jul 4, 2026
This PCNE practice question is part of Courseiva's free Google Cloud certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNE exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.