Nse7 SD Wan Security Profiles Routing And Ipsec

An enterprise network uses ADVPN 2.0 with BGP running over IPsec tunnels. A spoke needs to initiate a shortcut tunnel to another spoke. Which FortiOS CLI command is used on the hub to verify the active shortcut tunnels and view the shortcut state information?

An administrator configures an SD-WAN rule with a 'Lowest Cost (SLA)' strategy. What determines the metric used by FortiOS to select the best interface when multiple links meet the SLA criteria?

An administrator implements BGP over SD-WAN tunnels to a cloud provider. The cloud provider requires BGP MD5 authentication on all peering sessions. Where is BGP MD5 authentication configured on the FortiGate?

An enterprise deploys ADVPN 2.0 with BGP and security profiles applied to traffic traversing the VPN overlay. Which THREE statements are correct regarding how security profiles and ADVPN 2.0 interact in FortiOS? (Choose three)

An enterprise network uses OSPF over SD-WAN IPsec tunnels. The administrator notices that OSPF adjacency is constantly dropping over a specific backup SD-WAN member link due to intermittent packet loss. Which THREE configuration adjustments can improve OSPF stability over unstable SD-WAN IPsec links? (Choose three)

A FortiGate device is running ADVPN 2.0 with OSPF. A spoke experiences transient routing loops when a shortcut tunnel tears down due to inactivity timeout. Which configuration adjustment on the FortiGate hub and spokes prevents these temporary routing blackholes or loops during shortcut teardown?

In an ADVPN 2.0 deployment, a hub unit uses BGP to advertise routes to spokes. When a spoke learns a prefix via BGP from the hub, what mechanism allows the spoke to automatically initiate an ADVPN shortcut tunnel directly to another spoke when traffic flows between them?

An administrator applies security profiles (Antivirus, Web Filtering, and IPS) to traffic steered by an SD-WAN rule. Performance issues arise. Which TWO methods can the administrator use to optimize inspection performance without completely disabling security? (Choose two)

When configuring an SD-WAN health check to monitor internet reachability using HTTP/HTTPS requests, which parameter defines the specific string the FortiGate expects to receive in the server response body to validate that the path is healthy?

When troubleshooting SD-WAN performance SLA packet loss, an administrator wants to view real-time latency, jitter, and packet loss statistics for individual health check members. Which CLI command should be executed?

An administrator wants to apply a Web Filtering security profile to traffic that is being dynamically steered via an SD-WAN rule. Where must this security profile be enforced in FortiOS?

An administrator configures an SD-WAN rule using the 'Volume' strategy across two IPsec tunnels with different bandwidth capacities (Tunnel A: 100 Mbps, Tunnel B: 50 Mbps). How does FortiOS distribute traffic across these members when using the Volume strategy?

An administrator wants to view the active SD-WAN rule hit counts and verify which traffic is matching a specific SD-WAN rule in FortiOS. Which command should be used?

An administrator troubleshoots a scenario where traffic matching an application-based SD-WAN rule is bypassing the preferred high-speed MPLS tunnel and taking the backup broadband tunnel instead. Which THREE factors should the administrator check to resolve this routing discrepancy? (Choose three)

An IPsec VPN tunnel used as an SD-WAN member is experiencing intermittent flapping due to DPD (Dead Peer Detection) timeout issues over a high-latency satellite link. How should the administrator adjust the Phase 1 IPsec settings on FortiOS to stabilize the tunnel without completely disabling failure detection?

An administrator needs to inspect encrypted traffic traversing an SD-WAN IPsec tunnel using Deep Packet Inspection (DPI). What must be installed on the client endpoints or configured on the FortiGate to prevent browser trust warnings when using SSL/TLS full inspection?

An administrator configures a static route where the gateway is an SD-WAN zone instead of a specific IP address. How does FortiOS process this SD-WAN static route?

When configuring advanced IPsec VPN tunnels to act as members of an SD-WAN zone, which TWO configuration parameters on the FortiGate are critical for ensuring proper IPsec tunnel operation and traffic steering? (Choose two)

An administrator is troubleshooting BGP route propagation over SD-WAN IPsec tunnels where a branch office is not receiving specific routes from the datacenter hub. Which TWO CLI commands on the FortiGate are most useful for diagnosing BGP peering and advertised route issues? (Choose two)

An administrator configures an SD-WAN health check with multiple probes (e.g., ping and HTTP) to monitor a set of IPsec VPN tunnels. Which THREE criteria or settings govern how FortiOS determines whether an SD-WAN member has met or failed the performance SLA? (Choose three)

A FortiGate SD-WAN deployment uses a firewall policy with an Intrusion Prevention System (IPS) profile applied. After turning on IPS, administrators notice that throughput over an IPsec SD-WAN tunnel drops significantly. What is the primary reason for this throughput reduction, and how can it be mitigated?

An administrator is troubleshooting an SD-WAN deployment where traffic matching an SD-WAN rule with a destination service object (e.g., HTTPS) is not being steered according to the SLA priority. Instead, it is always taking the default static route member. Upon checking the firewall policies, what is the most common reason why an SD-WAN rule fails to process application or service-based traffic matching?

An administrator is configuring BGP over SD-WAN IPsec tunnels between a headquarters FortiGate and branch FortiGates. Which TWO configuration steps are required to ensure robust and stable dynamic routing over the SD-WAN IPsec tunnels? (Choose two)