- A
Ensure that the antivirus profile is not interfering with IPS.
Why wrong: Antivirus and IPS are independent; they do not interfere with each other's actions.
- B
Verify that the signature's 'Action' is not overridden by a higher-priority rule in the IPS sensor.
If multiple rules match the same traffic, the highest priority rule's action takes effect. An override with 'Monitor' could prevent blocking.
- C
Check if the firewall policy is using 'flow-based' or 'proxy-based' inspection mode. Some IPS signatures require proxy mode.
Certain IPS signatures, especially those requiring protocol decoding, need proxy-based inspection to function correctly. If the policy is in flow mode, the signature may not be applied effectively.
- D
Check if the destination server is in the 'Local-in' policy, which may bypass IPS.
Why wrong: IPS is applied to firewall policies, not local-in policies. Traffic to the FortiGate itself is handled differently.
- E
Confirm that the signature has a valid CVE ID.
Why wrong: A signature may or may not have a CVE; lack of CVE does not affect its ability to block.
Quick Answer
The answer is to check if the firewall policy is using 'flow-based' or 'proxy-based' inspection mode, because some IPS signatures require proxy mode to enforce a 'Block' action. When a signature is set to block but traffic passes through, the inspection mode is often the culprit: flow-based mode processes packets quickly but may skip deep packet inspection for certain complex signatures, whereas proxy-based mode reassembles the full stream, allowing the IPS engine to match and block the traffic as configured. On the Fortinet NSE 4 Network Security Professional NSE4 exam, this question tests your understanding of how IPS inspection modes interact with firewall policies—a common trap is assuming that simply enabling the signature and applying the sensor is enough. The second check is verifying that the IPS sensor is applied to the correct policy direction (incoming or outgoing), as misapplied direction can also prevent blocking. Memory tip: think "Flow for speed, Proxy for depth—if your block won't stick, check the mode quick."
NSE4 Security Profiles Practice Question
This NSE4 practice question tests your understanding of security profiles. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An administrator configures an IPS sensor with a signature that is triggered by traffic to a specific server. The signature is set to 'Block' but the traffic is not being blocked. The administrator verifies that the IPS sensor is applied to the correct firewall policy and that the signature is enabled. Which TWO additional checks should the administrator perform? (Choose two.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Verify that the signature's 'Action' is not overridden by a higher-priority rule in the IPS sensor.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Ensure that the antivirus profile is not interfering with IPS.
Why it's wrong here
Antivirus and IPS are independent; they do not interfere with each other's actions.
- ✓
Verify that the signature's 'Action' is not overridden by a higher-priority rule in the IPS sensor.
Why this is correct
If multiple rules match the same traffic, the highest priority rule's action takes effect. An override with 'Monitor' could prevent blocking.
Related concept
Static NAT maps one inside address to one outside address.
- ✓
Check if the firewall policy is using 'flow-based' or 'proxy-based' inspection mode. Some IPS signatures require proxy mode.
- ✗
Check if the destination server is in the 'Local-in' policy, which may bypass IPS.
- ✗
Confirm that the signature has a valid CVE ID.
Why it's wrong here
A signature may or may not have a CVE; lack of CVE does not affect its ability to block.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related NSE4 NAT questions on configuration and troubleshooting.
- →
Security Profiles — study guide chapter
Learn the concepts, then practise the questions
- →
Security Profiles practice questions
Targeted practice on this topic area only
- →
All NSE4 questions
1,000 questions across all exam domains
- →
Fortinet NSE 4 Network Security Professional NSE4 study guide
Full concept coverage aligned to exam objectives
- →
NSE4 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related NSE4 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
System and Network Administration practice questions
Practise NSE4 questions linked to System and Network Administration.
Firewall Policies and NAT practice questions
Practise NSE4 questions linked to Firewall Policies and NAT.
Authentication and VPN practice questions
Practise NSE4 questions linked to Authentication and VPN.
Security Profiles practice questions
Practise NSE4 questions linked to Security Profiles.
High Availability and Diagnostics practice questions
Practise NSE4 questions linked to High Availability and Diagnostics.
NSE4 fundamentals practice questions
Practise NSE4 questions linked to NSE4 fundamentals.
NSE4 scenario practice questions
Practise NSE4 questions linked to NSE4 scenario.
NSE4 troubleshooting practice questions
Practise NSE4 questions linked to NSE4 troubleshooting.
Practice this exam
Start a free NSE4 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this NSE4 question test?
Security Profiles — This question tests Security Profiles — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Verify that the signature's 'Action' is not overridden by a higher-priority rule in the IPS sensor.
What should I do if I get this NSE4 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related NSE4 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 21, 2026
This NSE4 practice question is part of Courseiva's free Fortinet certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the NSE4 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.