Courseiva
Free · No account needed · No credit card

CompTIA Server+ SK0-005 Practice Test

144 questions with instant explanations, domain breakdown, and wrong-answer analysis. Built for the real exam.

Instant feedback after each answer
Full explanations included
Domain score breakdown
Real exam: 90 min
Pass mark: 750%

Sample questions with explanations

This is exactly what you see during practice — question, options, and a full explanation after you answer.

Q1server-hardware-installation-managementeasy
Full explanation →

A technician is installing a new server in a data center. To prevent electrostatic discharge (ESD) damage, which of the following should the technician do FIRST?

APlace an anti-static mat on the floor
BSpray anti-static solution on the server rack
CWear rubber-soled shoes
Attach an ESD wrist strap to a grounded surfaceCorrect

Option C is correct because using an ESD wrist strap connected to a grounded surface is the primary method to prevent ESD damage. Option A is wrong because wearing rubber-soled shoes alone does not provide a path to ground. Option B is wrong because an anti-static mat must be use…Read full explanation

Q2server-hardware-installation-managementmedium
Full explanation →

A server with a RAID 5 array of four disks reports a degraded logical drive. The technician replaces the failed disk and rebuilds the array. After the rebuild completes, the array is still degraded. Which of the following is the most likely cause?

AThe replacement disk is assigned a different drive letter in the OS
BThe RAID controller firmware is outdated
The replacement disk has a different rotational speed than the other disksCorrect
DThe replacement disk is missing a partition table

Option B is correct because if the replacement disk is of a different speed (e.g., 10k vs 15k), the RAID controller may not accept it or the rebuild may fail, leaving the array degraded. Option A is wrong because missing a partition would not cause the array to remain degraded af…Read full explanation

Q3server-hardware-installation-managementeasy
Full explanation →

A server logged the warning shown in the exhibit. Which of the following should the technician check first?

AThe power supply voltage to the processor
The processor cooling fanCorrect
CThe ambient temperature of the data center
DThe thermal paste between the heatsink and processor

Option C is correct because the warning indicates high processor temperature, which is often caused by a failed or inadequate cooling fan for the CPU. Option A is wrong because the thermal paste would not cause a sudden temperature change; it's a more gradual issue. Option B is w…Read full explanation

Untimed Practice

Answer at your own pace. Explanation and domain tag shown immediately after each answer.

Timed Practice

Countdown timer starts immediately. Results and domain scores shown at the end — just like the real exam.

Why practice here?

Full explanations on every question

Not just the right answer — you get exactly why each wrong option is wrong, so you learn the concept, not the answer.

Domain score breakdown

After each session see your score by exam domain so you know exactly where to focus study time.

100% free, forever

No subscription, no trial, no email wall. Start a session in under 10 seconds.

Exam-style questions

Scenario-based, precise wording, realistic distractors — written to match what you actually see on exam day.

← All SK0-005 questionsSK0-005 exam guideStudy guidePractice by domain