mediummultiple choiceObjective-mapped

A technician is entering a secured server room using their badge. They notice an unfamiliar person slips in behind them before the door closes, without using any credentials. The person is wearing a lanyard with a generic company logo but no visible photo ID. Which of the following actions should the technician take FIRST?

Question 1mediummultiple choice
Full question →

A technician is entering a secured server room using their badge. They notice an unfamiliar person slips in behind them before the door closes, without using any credentials. The person is wearing a lanyard with a generic company logo but no visible photo ID. Which of the following actions should the technician take FIRST?

Answer choices

Why each option matters

Good practice is not just finding the correct option. The wrong answers often show the exact trap the exam wants you to fall into.

A

Distractor review

Politely ask the person to leave and escort them to the front desk.

Confronting an unknown person is unsafe and is not the recommended first action.

B

Best answer

Immediately notify security and/or a supervisor about the incident.

This follows security best practices. Security personnel are trained to handle potential intrusions.

C

Distractor review

Continue to the server and perform the scheduled maintenance, ignoring the person.

Ignoring the breach could lead to unauthorized access to sensitive systems and data.

D

Distractor review

Ask the person for their employee ID number and verify in the directory.

The technician lacks authority and tools to verify credentials, and the person could provide false information.

Common exam trap

Common exam trap: answer the scenario, not the keyword

Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.

Technical deep dive

How to think about this question

This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.

KKey Concepts to Remember

  • Read the scenario before looking for a memorised answer.
  • Find the constraint that changes the correct option.
  • Eliminate answers that are true in general but not in this case.
  • Use explanations to understand the rule behind the answer.

TExam Day Tips

  • Underline the problem statement mentally.
  • Watch for words such as best, first, most likely and least administrative effort.
  • Review why wrong options are wrong, not only why the correct option is correct.

Related practice questions

Related 220-1101 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

More questions from this exam

Keep practising from the same exam bank, or move into a focused topic page if this question exposed a weak area.

Question 1

A user reports intermittent network connectivity on a desktop computer. The technician observes that the Ethernet link light on the NIC turns off for a few seconds and then turns back on. The cable passes a wiremap test, the switch port is verified good with another device, and the NIC driver is updated. The issue occurs more frequently when the computer's case fan runs at high speed. Which of the following is the MOST likely cause?

Question 2

A workstation is unable to connect to the internet. The technician runs the 'ipconfig' command and sees the IPv4 address is 169.254.15.200 with a subnet mask of 255.255.0.0. The workstation can ping other devices on the local subnet but cannot ping the default gateway or any external addresses. Which TWO actions should the technician take to resolve this issue? (Select two.)

Question 3

A workstation is connected to a managed switch. It obtains a valid IP address (192.168.10.50) from the DHCP server, but it cannot ping the default gateway (192.168.10.1). The link light on both the workstation NIC and the switch port are solid green. Other workstations on the same switch CAN ping the default gateway successfully. The technician accesses the switch management interface and finds that the workstation's port is configured as an access port on VLAN 10. The default gateway is located on VLAN 20. An inter-VLAN router is configured but not explicitly allowing VLAN 10 access to VLAN 20. Which of the following is the MOST likely cause of the problem?

Question 4

A company develops a web application that relies on a custom library available only for a specific Linux distribution. They want to deploy the application in the cloud with minimal administrative overhead, but they need full control over the software stack, including the ability to install the custom library and configure the web server. Which cloud service model BEST meets these requirements?

Question 5

A company has a legacy virtual machine running on a deprecated hypervisor (Hyper-V). They want to migrate this VM to a new hypervisor (VMware vSphere) hosted in a private cloud while preserving the VM's configuration, installed applications, and data. The migration must be performed with minimal downtime. Which of the following methods is MOST appropriate?

Question 6

A company hosts a critical database on a virtual machine in a public cloud. The database requires persistent storage that must be retained even if the VM is terminated. The storage must also be accessible from multiple VMs simultaneously for a future high-availability configuration. Which type of cloud storage BEST meets these requirements?

FAQ

Questions learners often ask

What does this 220-1101 question test?

Read the scenario before looking for a memorised answer.

What is the correct answer to this question?

The correct answer is: Immediately notify security and/or a supervisor about the incident. — Tailgating is a common physical security breach. The technician should never confront the individual directly, as that could be unsafe. The best practice is to immediately report the incident to security or a supervisor, who can handle the situation appropriately. Politely asking the person to leave (A) is insufficient and could be risky. Ignoring the person (C) compromises security. Asking for an employee ID (D) is not appropriate as the technician does not have the authority to verify credentials or detain the person. Reporting ensures the incident is documented and handled by trained personnel.

What should I do if I get this 220-1101 question wrong?

Then try more questions from the same exam bank and focus on understanding why the wrong options are tempting.

Discussion

Loading comments…

Sign in to join the discussion.