Question 1hardmultiple choice
Full question →hardmultiple choiceObjective-mapped
A technician builds a new workstation. After installing the CPU, heatsink, RAM, and a discrete video card, the system powers on (fans spin, lights come on) but the monitor shows 'No Signal'. The technician verifies the monitor works with another computer. The motherboard has integrated graphics, and the technician tries connecting the monitor to both the integrated port and the discrete video card port; neither produces a display. The system emits no beep codes. Which of the following should the technician do NEXT?
Answer choices
Why each option matters
Good practice is not just finding the correct option. The wrong answers often show the exact trap the exam wants you to fall into.
A
Distractor review
Reseat the CPU and reapply thermal paste
A CPU seating issue would typically cause the system to fail POST with specific beep codes or immediately shut down. Since the system stays on and no beeps are heard, the CPU is likely seated correctly.
B
Best answer
Clear the CMOS by removing the battery or using the jumper
Clearing the CMOS resets BIOS/UEFI settings to defaults. This can resolve conflicts where the system is trying to output video to a port that is not physically available or is disabled. It is a standard troubleshooting step for no-display issues after a new build.
C
Distractor review
Replace the RAM modules one at a time
Faulty or incompatible RAM usually causes beep codes or a failure to POST (continuous reboot). The system appears to POST (no beeps) but has no video, so RAM is not the primary suspect.
D
Distractor review
Check the power supply connections to the discrete video card
Even if the discrete card lacked power, the integrated graphics should still work. Since both outputs fail, the problem is more likely in the system configuration, not in the power to the GPU.
Common exam trap
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Technical deep dive
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Related practice questions
Related 220-1101 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
CompTIA A+ hardware practice questions
Practise 220-1101 questions linked to CompTIA A+ hardware.
CompTIA A+ mobile devices practice questions
Practise 220-1101 questions linked to CompTIA A+ mobile devices.
CompTIA A+ networking practice questions
Practise 220-1101 questions linked to CompTIA A+ networking.
CompTIA A+ operating systems practice questions
Practise 220-1101 questions linked to CompTIA A+ operating systems.
CompTIA A+ security practice questions
Practise 220-1101 questions linked to CompTIA A+ security.
CompTIA A+ software troubleshooting questions
Practise 220-1101 questions linked to CompTIA A+ software troubleshooting questions.
CompTIA A+ operational procedures questions
Practise 220-1101 questions linked to CompTIA A+ operational procedures questions.
More questions from this exam
Keep practising from the same exam bank, or move into a focused topic page if this question exposed a weak area.
Question 1
A user reports intermittent network connectivity on a desktop computer. The technician observes that the Ethernet link light on the NIC turns off for a few seconds and then turns back on. The cable passes a wiremap test, the switch port is verified good with another device, and the NIC driver is updated. The issue occurs more frequently when the computer's case fan runs at high speed. Which of the following is the MOST likely cause?
Question 2
A workstation is unable to connect to the internet. The technician runs the 'ipconfig' command and sees the IPv4 address is 169.254.15.200 with a subnet mask of 255.255.0.0. The workstation can ping other devices on the local subnet but cannot ping the default gateway or any external addresses. Which TWO actions should the technician take to resolve this issue? (Select two.)
Question 3
A workstation is connected to a managed switch. It obtains a valid IP address (192.168.10.50) from the DHCP server, but it cannot ping the default gateway (192.168.10.1). The link light on both the workstation NIC and the switch port are solid green. Other workstations on the same switch CAN ping the default gateway successfully. The technician accesses the switch management interface and finds that the workstation's port is configured as an access port on VLAN 10. The default gateway is located on VLAN 20. An inter-VLAN router is configured but not explicitly allowing VLAN 10 access to VLAN 20. Which of the following is the MOST likely cause of the problem?
Question 4
A company develops a web application that relies on a custom library available only for a specific Linux distribution. They want to deploy the application in the cloud with minimal administrative overhead, but they need full control over the software stack, including the ability to install the custom library and configure the web server. Which cloud service model BEST meets these requirements?
Question 5
A company has a legacy virtual machine running on a deprecated hypervisor (Hyper-V). They want to migrate this VM to a new hypervisor (VMware vSphere) hosted in a private cloud while preserving the VM's configuration, installed applications, and data. The migration must be performed with minimal downtime. Which of the following methods is MOST appropriate?
Question 6
A company hosts a critical database on a virtual machine in a public cloud. The database requires persistent storage that must be retained even if the VM is terminated. The storage must also be accessible from multiple VMs simultaneously for a future high-availability configuration. Which type of cloud storage BEST meets these requirements?
FAQ
Questions learners often ask
What does this 220-1101 question test?
Read the scenario before looking for a memorised answer.
What is the correct answer to this question?
The correct answer is: Clear the CMOS by removing the battery or using the jumper — With no display from either video source and no beep codes, the system appears to be completing POST but may be defaulting to the wrong video adapter or have a BIOS configuration issue. Clearing the CMOS will reset BIOS settings to factory defaults, which often enables integrated graphics output if the discrete card is not properly initialized. This is a non-invasive step that can resolve display issues without replacing hardware. Reseating the CPU would be too aggressive without signs of a CPU problem. The RAM would usually cause beep codes if faulty. Checking power to the GPU is less relevant because integrated graphics also fails, suggesting the issue is not with the graphics card's power.
What should I do if I get this 220-1101 question wrong?
Then try more questions from the same exam bank and focus on understanding why the wrong options are tempting.
Discussion
Loading comments…
Sign in to join the discussion.