Question 884 of 1,000
easymultiple choiceObjective-mapped

220-1102 Practice Question: Configure a Windows 10 workstation to use a proxy…

This 220-1102 practice question tests your understanding of configure a windows 10 workstation to use a proxy…. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A technician needs to configure a Windows 10 workstation to use a proxy server for internet access. Which Control Panel applet should be used?

Question 1easymultiple choice
Full question →

A technician needs to configure a Windows 10 workstation to use a proxy server for internet access. Which Control Panel applet should be used?

Answer choices

Why each option matters

Good practice is not just finding the correct option. The wrong answers often show the exact trap the exam wants you to fall into.

A

Best answer

Internet Options -> Connections tab -> LAN settings

This is the correct location. Open Internet Options, go to the Connections tab, and click 'LAN settings' to enter proxy server information.

B

Distractor review

Network and Sharing Center -> Change adapter settings

The Network and Sharing Center is used to view network status and manage network adapters, not to configure proxy settings.

C

Distractor review

Device Manager -> Network adapters

Device Manager is used to manage hardware device drivers and resources, not proxy configurations.

D

Distractor review

Windows Firewall -> Advanced settings

Windows Firewall controls inbound and outbound traffic rules, not proxy server configuration.

Answer analysis

Why the other options are wrong

Understanding why incorrect options are tempting is as important as knowing the correct answer.

  • Network and Sharing Center -> Change adapter settings

    The Network and Sharing Center is used to view network status and manage network adapters, not to configure proxy settings.

  • Device Manager -> Network adapters

    Device Manager is used to manage hardware device drivers and resources, not proxy configurations.

  • Windows Firewall -> Advanced settings

    Windows Firewall controls inbound and outbound traffic rules, not proxy server configuration.

Common exam trap

Common exam trap: OSPF can fail even when IP connectivity looks correct

OSPF neighbour formation depends on matching areas, timers, network type, authentication and passive-interface behaviour. Do not choose an answer only because the devices can ping.

Technical deep dive

How to think about this question

OSPF questions usually test the details that control adjacency and route selection. Read the neighbour state, area, router ID and interface configuration before deciding what is wrong.

KKey Concepts to Remember

  • OSPF neighbours must agree on key parameters.
  • Router ID selection can affect neighbour relationships and LSDB output.
  • OSPF cost influences the preferred path.
  • A route can appear in OSPF information but not become the installed route.

TExam Day Tips

  • Check area mismatch first when OSPF adjacency fails.
  • Review passive interfaces when a network is advertised but no neighbour forms.
  • Use show ip ospf neighbor and show ip route clues carefully.

Key takeaway

OSPF neighbour adjacency depends on matching area, hello/dead timers, network type, and authentication — IP reachability alone is not enough.

Related practice questions

Related 220-1102 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

More questions from this exam

Keep practising from the same exam bank, or move into a focused topic page if this question exposed a weak area.

Question 1

A change advisory board (CAB) approved a standard change to update antivirus definitions on all servers. The technician completes the update on a file server and verifies the server is functioning normally. According to change management best practices, what documentation should the technician complete?

Question 2

A company's change management policy requires all server changes to be approved by the Change Advisory Board (CAB). A technician discovers that a critical database server's operating system needs a security patch to comply with a new regulatory requirement that takes effect in one week. The patch has a known risk of causing service downtime. The next scheduled CAB meeting is in two weeks. What should the technician do FIRST?

Question 3

A company is implementing a bring-your-own-device (BYOD) policy and needs to ensure that corporate data on employee mobile devices is protected. Which of the following is the MOST important technical control to implement?

Question 4

A company requires employees to present both a smart card and a PIN to log into their workstations. Which authentication principle is being implemented?

Question 5

A company requires all Windows 10 workstations to be able to join an Active Directory domain. Which edition of Windows 10 must be installed on these workstations?

Question 6

A company wants to allow employees to securely access internal resources from home via the internet. Which method provides the highest level of security for remote desktop connections?

Practice this exam

Start a free 220-1102 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 220-1102 question test?

OSPF neighbours must agree on key parameters.

What is the correct answer to this question?

The correct answer is: Internet Options -> Connections tab -> LAN settings — The proxy settings are configured in Internet Options under the Connections tab, in the LAN settings area. This allows the user or technician to specify a proxy server address and port, as well as bypass local addresses. The other options deal with network adapter properties, device drivers, or firewall settings, none of which directly configure proxy settings.

What should I do if I get this 220-1102 question wrong?

Review OSPF neighbour requirements — matching area type, hello and dead timers, network type, stub flags, and authentication. Study show ip ospf neighbor states (INIT, 2-WAY, FULL). Then practise related 220-1102 OSPF questions on adjacency and route selection.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

More 220-1102 practice questions

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 220-1102 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 220-1102 exam.