- A
The command 'logging buffered 4096' sets the buffer size to 4096 bytes and enables logging to the buffer.
Correct. This command enables buffered logging with a buffer size of 4096 bytes.
- B
Disabling console logging with 'no logging console' also disables buffered logging.
Why wrong: Incorrect. Console logging and buffered logging are independent; disabling one does not affect the other.
- C
If 'logging buffered' is configured, the buffer can be viewed using the 'show logging' command.
Correct. The 'show logging' command displays the contents of the logging buffer.
- D
The 'logging buffered' command requires 'logging on' to be configured first; otherwise, it has no effect.
Why wrong: Incorrect. 'logging on' is enabled by default; 'logging buffered' works independently, but if 'logging off' is configured, no logging occurs.
- E
The 'no logging buffered' command clears the buffer and stops all logging to the buffer.
Why wrong: Incorrect. 'no logging buffered' disables buffered logging but does not clear the buffer; the buffer retains old messages until overwritten.
Quick Answer
The correct answer is that if 'logging buffered' is configured, the buffer can be viewed using the 'show logging' command. This is because the command stores syslog messages in a local RAM buffer, which is then accessible via the 'show logging' output, allowing you to review historical events without an external server. On the Cisco CCNP ENARSI 300-410 exam, this concept tests your understanding of how logging destinations operate independently—'logging buffered' does not disable 'logging console' or 'logging monitor', and the buffer persists even after issuing 'no logging buffered', though new messages stop being written. A common trap is assuming that disabling buffer logging clears the buffer; it does not, so you must manually clear it with 'clear logging' if needed. Remember the mnemonic: "Buffer stays, logs decay"—the buffer retains old messages until explicitly cleared or the device reloads.
300-410 Network Logging and Syslog Practice Question
This 300-410 practice question tests your understanding of network logging and syslog. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which TWO statements about the 'logging buffered' command and its interaction with other logging commands are correct? (Choose TWO.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The command 'logging buffered 4096' sets the buffer size to 4096 bytes and enables logging to the buffer.
The 'logging buffered' command enables logging to an internal buffer. The size can be specified in bytes. The 'logging console' and 'logging buffered' are independent; disabling one does not affect the other. The 'logging monitor' controls terminal line logging. The 'logging on' command globally enables logging output; without it, no logging occurs. The 'no logging buffered' command disables buffer logging but does not clear the buffer.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The command 'logging buffered 4096' sets the buffer size to 4096 bytes and enables logging to the buffer.
Why this is correct
Correct. This command enables buffered logging with a buffer size of 4096 bytes.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Disabling console logging with 'no logging console' also disables buffered logging.
Why it's wrong here
Incorrect. Console logging and buffered logging are independent; disabling one does not affect the other.
- ✓
If 'logging buffered' is configured, the buffer can be viewed using the 'show logging' command.
Why this is correct
Correct. The 'show logging' command displays the contents of the logging buffer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The 'logging buffered' command requires 'logging on' to be configured first; otherwise, it has no effect.
Why it's wrong here
Incorrect. 'logging on' is enabled by default; 'logging buffered' works independently, but if 'logging off' is configured, no logging occurs.
- ✗
The 'no logging buffered' command clears the buffer and stops all logging to the buffer.
Why it's wrong here
Incorrect. 'no logging buffered' disables buffered logging but does not clear the buffer; the buffer retains old messages until overwritten.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Network Logging and Syslog — study guide chapter
Learn the concepts, then practise the questions
- →
Network Logging and Syslog practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
Network Logging and Syslog — This question tests Network Logging and Syslog — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The command 'logging buffered 4096' sets the buffer size to 4096 bytes and enables logging to the buffer. — The 'logging buffered' command enables logging to an internal buffer. The size can be specified in bytes. The 'logging console' and 'logging buffered' are independent; disabling one does not affect the other. The 'logging monitor' controls terminal line logging. The 'logging on' command globally enables logging output; without it, no logging occurs. The 'no logging buffered' command disables buffer logging but does not clear the buffer.
What should I do if I get this 300-410 question wrong?
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more ways this is tested on 300-410
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. What is the default behavior of the 'logging buffered' command in Cisco IOS-XE when no severity level is specified?
medium- A.It captures only messages of severity 0 through 4.
- B.It captures only messages of severity 0 through 5.
- C.It captures only messages of severity 0 through 6.
- ✓ D.It captures messages of severity 0 through 7.
Why D: When 'logging buffered' is configured without a severity level, it defaults to severity 7 (debugging), capturing all messages.
Keep practising
More 300-410 practice questions
- Drag and drop the steps to negotiate an IKEv2 IPsec site-to-site tunnel into the correct order, from first to last.
- Drag and drop the steps to troubleshoot an IPsec site-to-site VPN adjacency failure into the correct order, from first t…
- Drag and drop the steps to verify and validate the operational state of an IPsec site-to-site VPN into the correct order…
- Drag and drop the steps to configure a GRE tunnel for IPv6 over IPv4 into the correct order, from first to last.
- Drag and drop the steps to troubleshoot IPv6 over IPv4 tunnel adjacency or connectivity failures into the correct order,…
- Drag and drop the steps to verify and validate the operational state of an IPv6 tunneling technique into the correct ord…
Last reviewed: Jun 18, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.