300-410 Practice Question: A network engineer is configuring a Cisco IOS router to act as a DHCP server for a remote…
A network engineer is configuring a Cisco IOS router to act as a DHCP server for a remote subnet. The router interface connected to that subnet is configured with the address 10.10.10.1/24. The engineer wants the router to assign addresses from the 10.10.10.0/24 range and also provide the default gateway and DNS server information to clients. Which configuration is required on the router to accomplish this?
⚠ Common exam trap
The trap here is assuming that the default-router must be the highest or lowest address in the subnet, rather than the router's actual interface address.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
ip dhcp pool LAN, network 10.10.10.0 255.255.255.0, default-router 10.10.10.1, dns-server 8.8.8.8
The correct configuration must include a DHCP pool with the network statement, default-router set to the router's interface IP (10.10.10.1), and dns-server for DNS. The other options either omit DNS, use an incorrect gateway, or add unnecessary parameters. The router's interface address is the appropriate default gateway for clients on that subnet.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
ip dhcp excluded-address 10.10.10.1 10.10.10.10, ip dhcp pool LAN, network 10.10.10.0 255.255.255.0, default-router 10.10.10.254
Why it's wrong here
This configuration hands clients 10.10.10.254 as their default gateway, but the router's interface on that subnet is 10.10.10.1, so clients would send off-subnet traffic to an address that may not exist and lose connectivity beyond the LAN. It also gives no DNS server, which the requirement asks for. Excluding addresses for static devices is good practice, but the gateway value must match the router's interface address.
- ✗
ip dhcp pool LAN, network 10.10.10.0 255.255.255.0, default-router 10.10.10.1, dns-server 8.8.8.8, lease 0 0 10
Why it's wrong here
The lease 0 0 10 command sets the lease duration to 10 minutes, which is valid but not required by the scenario. The core requirement is to provide IP addresses, gateway, and DNS. The lease command does not fulfill the missing DNS configuration, and the pool would still work without it. This option is not the minimal required configuration.
- ✗
ip dhcp pool LAN, network 10.10.10.0 255.255.255.0, default-router 10.10.10.1, dns-server 8.8.8.8, domain-name example.com
Why it's wrong here
The domain-name command is optional and not requested in the scenario. While it is a valid DHCP option, the question only asks for default gateway and DNS server. Including it does not make the configuration incorrect, but it is not required. The other options lack either the correct gateway or DNS server configuration.
- ✓
ip dhcp pool LAN, network 10.10.10.0 255.255.255.0, default-router 10.10.10.1, dns-server 8.8.8.8
Why this is correct
This configuration creates a DHCP pool named LAN, defines the subnet 10.10.10.0/24 from which addresses are allocated, and specifies the default gateway and DNS server for clients. The router interface address 10.10.10.1 is used as the gateway. This is the standard Cisco IOS DHCP server configuration for a directly connected subnet.
Visual reference
Go deeper
Related to this question
About these practice questions
One of 1,401 original 300-410 practice questions on Courseiva, each with a full explanation and wrong-answer analysis — not exam dumps or protected exam content. Learn why practice questions differ from exam dumps →
You might also like
Similar 300-410 questions
- A network engineer is configuring a Cisco IOS XE router to act as a Dynamic Host Configuration Protocol (DHCP) client on…
- A network administrator is troubleshooting an MPLS L3VPN where customer routes are not being propagated between PE route…
- A network engineer is deploying a DMVPN Phase 3 hub-and-spoke topology. The hub router must dynamically learn spoke-to-s…
- A network engineer is configuring a Cisco IOS router to support MPLS Traffic Engineering (TE). The engineer has enabled…
- A network administrator is implementing IPsec VPN between two Cisco routers. The administrator wants to ensure that only…
Written and reviewed by Johnson Ajibi, MSc IT Security
Security Systems Architect · founder of Courseiva
Last reviewed September 2026 · checked against the official Cisco exam blueprint
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.