- A
Standard ACLs can filter traffic based on source IP address only.
Correct because standard ACLs (numbered 1-99, 1300-1999) examine only the source IP address.
- B
Extended ACLs can filter based on source and destination IP addresses, protocol, and port numbers.
Correct because extended ACLs (numbered 100-199, 2000-2699) support these additional match criteria.
- C
An implicit deny any statement is automatically added at the end of every ACL.
Correct because all ACLs have an implicit deny any at the end, which drops any traffic not explicitly permitted.
- D
ACL entries are processed from bottom to top, with the last match determining the action.
Why wrong: Incorrect because ACL entries are processed sequentially from top to bottom; the first match determines the action.
- E
An ACL applied to an inbound interface filters traffic leaving that interface.
Why wrong: Incorrect because an inbound ACL filters traffic entering the interface; an outbound ACL filters traffic leaving the interface.
Quick Answer
The answer is that an implicit deny any statement is automatically added at the end of every IPv4 ACL on Cisco IOS. This is correct because ACLs operate on a first-match basis, and if no permit statement matches a packet, the implicit deny ensures the packet is dropped by default, providing a fundamental security boundary. Standard ACLs filter only on the source IP address, while extended ACLs can filter on source and destination IP, protocol, and port numbers, making extended ACLs more granular and preferable for placement closer to the source. On the ENCOR 350-401 exam, this concept tests your understanding of ACL processing order and the critical difference between standard and extended ACLs; a common trap is forgetting that the implicit deny is invisible but always present, or confusing the order of statements. A reliable memory tip is "first match wins, last deny hides"—the implicit deny is the silent guard at the end of every list.
CCNP ACLs and CoPP Practice Question
This 350-401 practice question tests your understanding of acls and copp. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which three statements about IPv4 ACLs on Cisco IOS are true? (Choose three.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Standard ACLs can filter traffic based on source IP address only.
Standard ACLs filter only source IP, extended ACLs filter more fields, and the implicit deny is always present. The incorrect options confuse the order of processing or the placement of ACLs.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Standard ACLs can filter traffic based on source IP address only.
Why this is correct
Correct because standard ACLs (numbered 1-99, 1300-1999) examine only the source IP address.
Related concept
Static NAT maps one inside address to one outside address.
- ✓
Extended ACLs can filter based on source and destination IP addresses, protocol, and port numbers.
Why this is correct
Correct because extended ACLs (numbered 100-199, 2000-2699) support these additional match criteria.
Related concept
Static NAT maps one inside address to one outside address.
- ✓
An implicit deny any statement is automatically added at the end of every ACL.
Why this is correct
Correct because all ACLs have an implicit deny any at the end, which drops any traffic not explicitly permitted.
Related concept
Static NAT maps one inside address to one outside address.
- ✗
ACL entries are processed from bottom to top, with the last match determining the action.
Why it's wrong here
Incorrect because ACL entries are processed sequentially from top to bottom; the first match determines the action.
- ✗
An ACL applied to an inbound interface filters traffic leaving that interface.
Why it's wrong here
Incorrect because an inbound ACL filters traffic entering the interface; an outbound ACL filters traffic leaving the interface.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
- Static NAT maps one inside address to one outside address.
- PAT allows many inside hosts to share one public address using ports.
- Inside local and inside global describe the private and translated addresses.
- NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
- Identify inside and outside interfaces first.
- Check whether the scenario needs static NAT, dynamic NAT or PAT.
- Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Got this wrong? Here's your next step.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 350-401 NAT questions on configuration and troubleshooting.
- →
ACLs and CoPP — study guide chapter
Learn the concepts, then practise the questions
- →
ACLs and CoPP practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
ACLs and CoPP — This question tests ACLs and CoPP — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: Standard ACLs can filter traffic based on source IP address only. — Standard ACLs filter only source IP, extended ACLs filter more fields, and the implicit deny is always present. The incorrect options confuse the order of processing or the placement of ACLs.
What should I do if I get this 350-401 question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 350-401 NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.