Question 1,037 of 2,015
WAN TechnologieseasyMatchingObjective-mapped

Quick Answer

The correct match is satellite with uses geostationary or LEO orbit because satellite broadband relies on radio frequency (RF) transmission to and from orbiting satellites, rather than terrestrial cabling. DSL operates over twisted-pair telephone lines, cable broadband uses coaxial cable, fiber broadband transmits light through optical fibers, and 4G LTE depends on cellular towers. On the ENCOR 350-401 exam, this drag-and-drop task tests your ability to distinguish physical-layer transport media for WAN access technologies, a common topic in the network fundamentals section. A frequent trap is confusing cable with DSL, since both use copper, but cable employs coaxial while DSL uses telephone-grade twisted pair. For a quick memory tip, think of the first letter of each technology: DSL uses copper phone lines (D for dial tone), Cable uses coaxial (C for coax), Fiber uses glass (F for filament), LTE uses cellular (L for long-range), and Satellite uses space (S for sky).

CCNP WAN Technologies Practice Question

This 350-401 practice question tests your understanding of wan technologies. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Drag and drop each broadband type on the left to its matching technology on the right.

Question 1easymatching
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

DSL: Uses telephone copper pairs

DSL uses telephone lines, Cable uses coaxial, Fiber uses optical, 4G LTE uses cellular, Satellite uses RF to orbit.

Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Common exam traps

Common exam trap: answer the scenario, not the keyword

Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.

Detailed technical explanation

How to think about this question

This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.

KKey Concepts to Remember

  • Read the scenario before looking for a memorised answer.
  • Find the constraint that changes the correct option.
  • Eliminate answers that are true in general but not in this case.
  • Use explanations to understand the rule behind the answer.

TExam Day Tips

  • Underline the problem statement mentally.
  • Watch for words such as best, first, most likely and least administrative effort.
  • Review why wrong options are wrong, not only why the correct option is correct.

Key takeaway

Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.

Real-world example

How this comes up in practice

A practitioner preparing for the 350-401 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.

What to study next

Got this wrong? Here's your next step.

Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.

Related practice questions

Related 350-401 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 350-401 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 350-401 question test?

WAN Technologies — This question tests WAN Technologies — Read the scenario before looking for a memorised answer..

What is the correct answer to this question?

The correct answer is: DSL: Uses telephone copper pairs — DSL uses telephone lines, Cable uses coaxial, Fiber uses optical, 4G LTE uses cellular, Satellite uses RF to orbit.

What should I do if I get this 350-401 question wrong?

Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.

What is the key concept behind this question?

Read the scenario before looking for a memorised answer.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Same concept, more angles

1 more ways this is tested on 350-401

These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.

Variation 1. Drag and drop each broadband type on the left to its matching technology on the right.

easy
  • P1.DSL: Uses telephone line with ADSL or VDSL
  • P2.Cable: Uses coaxial cable with DOCSIS
  • P3.Fiber: Uses optical fiber with GPON
  • P4.4G LTE: Uses cellular radio with OFDMA
  • P5.Satellite: Uses geostationary satellite with high latency

Why P1: DSL uses telephone lines with frequencies above voice. Cable uses coaxial cable with DOCSIS. Fiber uses optical fiber with GPON or active Ethernet. 4G LTE uses cellular radio. Satellite uses geostationary or LEO satellites.

Last reviewed: Jun 18, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.