Question 1mediumdrag order
Study the full AAA explanation →Question 1,031 of 2,015
Quick Answer
The correct order ends with the device sending the command record to the accounting server, as this final step occurs only after AAA is globally enabled, an accounting method list for commands is defined, and that method list is applied to a specific line such as vty or console. This sequence is correct because AAA accounting for commands requires a structured flow: global activation first, then method list creation, then line-level application, and finally the actual transmission of logs to the external server. On the ENCOR 350-401 exam, this drag-and-drop task tests your understanding of the AAA accounting lifecycle, often with a trap where candidates mistakenly place the server communication step before applying the method list to a line. A reliable memory tip is to think of it as "Enable, Define, Apply, Send"—you cannot send records until the router knows where to send them and which lines are monitored.
CCNP AAA, RADIUS, and TACACS+ Practice Question
This 350-401 practice question tests your understanding of aaa, radius, and tacacs+. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the steps of AAA accounting for command logging setup into the correct order, from first to last.
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"first"Why it matters: Order matters here. You are being tested on which action comes before the others — not which action is generally useful.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enable AAA globally on device
AAA accounting for commands requires first enabling AAA globally, then defining an accounting method list for commands. The method list is applied to a line (e.g., vty or console). The device then sends command logs to the accounting server, which records them.
Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Common exam traps
Common exam trap: authentication is not authorization
Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.
Detailed technical explanation
How to think about this question
This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.
KKey Concepts to Remember
- Authentication checks who the user is.
- Authorization controls what the user is allowed to do after login.
- Privilege levels affect access to EXEC and configuration commands.
- AAA, TACACS+ and RADIUS can separate login success from command access.
TExam Day Tips
- Do not assume successful login means full administrative access.
- Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
- Separate login problems from permission problems before choosing the answer.
Key takeaway
Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Real-world example
How this comes up in practice
A junior network technician can log in to a core router but cannot reach the enable prompt or configuration mode. The AAA server is authenticating the login — but the authorisation policy only grants privilege level 1, not 15. Authentication (who you are) is working; authorisation (what you can do) is not.
What to study next
Got this wrong? Here's your next step.
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 350-401 questions on access control and AAA configuration.
- →
AAA, RADIUS, and TACACS+ — study guide chapter
Learn the concepts, then practise the questions
- →
AAA, RADIUS, and TACACS+ practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
AAA, RADIUS, and TACACS+ — This question tests AAA, RADIUS, and TACACS+ — Authentication checks who the user is..
What is the correct answer to this question?
The correct answer is: Enable AAA globally on device — AAA accounting for commands requires first enabling AAA globally, then defining an accounting method list for commands. The method list is applied to a line (e.g., vty or console). The device then sends command logs to the accounting server, which records them.
What should I do if I get this 350-401 question wrong?
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 350-401 questions on access control and AAA configuration.
Are there clue words in this question I should notice?
Yes — watch for: "first". Order matters here. You are being tested on which action comes before the others — not which action is generally useful.
What is the key concept behind this question?
Authentication checks who the user is.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more ways this is tested on 350-401
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Drag and drop the steps of AAA accounting for command logging setup into the correct order, from first to last.
medium- ✓ A.Enable AAA globally with 'aaa new-model'
- ✓ B.Define accounting method list for commands
- ✓ C.Specify RADIUS or TACACS+ server group
- ✓ D.Apply accounting method list to console/vty lines
- ✓ E.Verify accounting records on AAA server
Why A: To log commands via AAA accounting, you first enable AAA globally, then configure the accounting method list for exec or commands, apply it to the desired lines, and finally verify that commands are being sent to the accounting server.
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.