- A
Enter global configuration mode, enable telemetry, define subscription with encoding and filter, specify receiver, verify data collection.
This is the correct sequence: first enter global config, then enable telemetry, define the subscription details (encoding and filter), specify the receiver, and finally verify data collection.
- B
Enable telemetry, define subscription, specify receiver, enter global config, verify data collection.
Why wrong: This is incorrect because you must enter global configuration mode before enabling telemetry or defining subscriptions.
- C
Define subscription with encoding and filter, enable telemetry, specify receiver, enter global config, verify data collection.
Why wrong: This is incorrect because you cannot define a subscription before entering global config and enabling telemetry.
- D
Specify receiver, define subscription, enable telemetry, enter global config, verify data collection.
Why wrong: This is incorrect because the receiver must be specified after the subscription is defined, and both require global config and telemetry enablement.
Quick Answer
The correct order is: enter global configuration mode, enable telemetry, define subscription with encoding and filter, specify receiver, then verify data collection. This sequence follows the logical hierarchy of IOS-XE configuration, where you must first access the global configuration context to enable the telemetry feature itself, then define the subscription parameters—such as using GPB or JSON encoding and a path filter like “Cisco-IOS-XE-interfaces-oper”—before pointing the data stream to a specific receiver IP and port. On the CCNA 200-301 v2 exam, this drag-and-drop task tests your understanding of model-driven telemetry setup, a key automation topic that often trips candidates who try to specify the receiver before defining the subscription. A common trap is confusing the order of enabling telemetry versus defining the subscription; remember that the feature must be active before you can configure its details. To recall the steps, use the mnemonic “Get Enabled, Define, Send, Verify” (GEDS-V), which maps to global config, enable, define subscription, specify receiver, and verify data collection.
CCNA AI and Network Operations Practice Question
This 200-301 practice question tests your understanding of ai and network operations. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the following steps into the correct order to configure gRPC streaming telemetry subscription on a Cisco IOS-XE device, from initial setup to data collection.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Enter global configuration mode, enable telemetry, define subscription with encoding and filter, specify receiver, verify data collection.
The correct order starts with entering global config, then enabling telemetry, defining subscription details (encoding and filter), specifying the receiver, and finally verifying data collection.
Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Enter global configuration mode, enable telemetry, define subscription with encoding and filter, specify receiver, verify data collection.
Why this is correct
This is the correct sequence: first enter global config, then enable telemetry, define the subscription details (encoding and filter), specify the receiver, and finally verify data collection.
Related concept
Authentication checks who the user is.
- ✗
Enable telemetry, define subscription, specify receiver, enter global config, verify data collection.
Why it's wrong here
This is incorrect because you must enter global configuration mode before enabling telemetry or defining subscriptions.
- ✗
Define subscription with encoding and filter, enable telemetry, specify receiver, enter global config, verify data collection.
Why it's wrong here
This is incorrect because you cannot define a subscription before entering global config and enabling telemetry.
- ✗
Specify receiver, define subscription, enable telemetry, enter global config, verify data collection.
Why it's wrong here
This is incorrect because the receiver must be specified after the subscription is defined, and both require global config and telemetry enablement.
Option-by-option analysis
Why each answer is right or wrong
Understanding why wrong answers are wrong — and when they would be correct — is what separates a 750 score from a 900. The 200-301 exam frequently reuses these exact scenarios with slightly different constraints.
✓Enter global configuration mode, enable telemetry, define subscription with encoding and filter, specify receiver, verify data collection.Correct answer▾
Why this is correct
This is the correct sequence: first enter global config, then enable telemetry, define the subscription details (encoding and filter), specify the receiver, and finally verify data collection.
✗Enable telemetry, define subscription, specify receiver, enter global config, verify data collection.Wrong answer — click to see why▾
Why this is wrong here
The order incorrectly places enabling telemetry before entering global config, which is not possible on Cisco IOS-XE.
Why candidates choose this
Candidates might think telemetry can be enabled from any mode, but it requires global config.
✗Define subscription with encoding and filter, enable telemetry, specify receiver, enter global config, verify data collection.Wrong answer — click to see why▾
Why this is wrong here
Subscription definition depends on telemetry being enabled first, and both require global config mode.
Why candidates choose this
Candidates might think subscription details can be defined first, but the order is sequential.
✗Specify receiver, define subscription, enable telemetry, enter global config, verify data collection.Wrong answer — click to see why▾
Why this is wrong here
Specifying a receiver before defining the subscription is out of order; the subscription must exist first.
Why candidates choose this
Candidates might think receiver configuration is independent, but it is part of the subscription.
Analysis generated from the official 200-301blueprint and verified against question context. The “when correct” sections are what AI assistants cite when candidates ask “what’s the difference between these options?”
Common exam traps
Common exam trap: authentication is not authorization
Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.
Detailed technical explanation
How to think about this question
This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.
KKey Concepts to Remember
- Authentication checks who the user is.
- Authorization controls what the user is allowed to do after login.
- Privilege levels affect access to EXEC and configuration commands.
- AAA, TACACS+ and RADIUS can separate login success from command access.
TExam Day Tips
- Do not assume successful login means full administrative access.
- Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
- Separate login problems from permission problems before choosing the answer.
Key takeaway
Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.
Real-world example
How this comes up in practice
A practitioner preparing for the 200-301 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 200-301 questions on access control and AAA configuration.
- →
AI and Network Operations — study guide chapter
Learn the concepts, then practise the questions
- →
AI and Network Operations practice questions
Targeted practice on this topic area only
- →
All 200-301 questions
1,819 questions across all exam domains
- →
CCNA 200-301 v2 study guide
Full concept coverage aligned to exam objectives
- →
200-301 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 200-301 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Infrastructure and Connectivity practice questions
Practise 200-301 questions linked to Network Infrastructure and Connectivity.
Switching and Network Access practice questions
Practise 200-301 questions linked to Switching and Network Access.
IP Routing practice questions
Practise 200-301 questions linked to IP Routing.
Network Services and Security practice questions
Practise 200-301 questions linked to Network Services and Security.
AI and Network Operations practice questions
Practise 200-301 questions linked to AI and Network Operations.
CCNA subnetting practice questions
Practise IPv4 subnetting, CIDR, masks, host ranges and subnet selection.
CCNA OSPF practice questions
Practise OSPF neighbours, router IDs, metrics, areas and routing-table interpretation.
CCNA VLAN practice questions
Practise VLANs, access ports, trunks, allowed VLANs and switching scenarios.
CCNA STP practice questions
Practise spanning tree, root bridge election, port roles and STP troubleshooting.
CCNA EtherChannel practice questions
Practise LACP, PAgP, port-channel behaviour and bundle requirements.
CCNA ACL practice questions
Practise standard and extended ACLs, permit/deny logic and traffic filtering.
CCNA NAT practice questions
Practise static NAT, dynamic NAT, PAT and inside/outside address translation.
Practice this exam
Start a free 200-301 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 200-301 question test?
AI and Network Operations — This question tests AI and Network Operations — Authentication checks who the user is..
What is the correct answer to this question?
The correct answer is: Enter global configuration mode, enable telemetry, define subscription with encoding and filter, specify receiver, verify data collection. — The correct order starts with entering global config, then enabling telemetry, defining subscription details (encoding and filter), specifying the receiver, and finally verifying data collection.
What should I do if I get this 200-301 question wrong?
Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 200-301 questions on access control and AAA configuration.
What is the key concept behind this question?
Authentication checks who the user is.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more ways this is tested on 200-301
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Drag and drop the following phases into the correct order to configure gRPC streaming telemetry subscription setup and then the NetFlow data path sequence.
medium- ✓ A.1. Configure gRPC telemetry subscription 2. Configure NetFlow export destination 3. Define flow monitor 4. Apply flow monitor to interface
- B.1. Define flow monitor 2. Apply flow monitor to interface 3. Configure gRPC telemetry subscription 4. Configure NetFlow export destination
- C.1. Configure NetFlow export destination 2. Define flow monitor 3. Apply flow monitor to interface 4. Configure gRPC telemetry subscription
- D.1. Apply flow monitor to interface 2. Configure gRPC telemetry subscription 3. Define flow monitor 4. Configure NetFlow export destination
Why A: First configure telemetry, then set up NetFlow export, define the flow monitor, and finally apply it to an interface.
Keep practising
More 200-301 practice questions
- A switchport connected to another switch should carry multiple VLANs, but it was manually configured as an access port.…
- What problem is HSRP designed to solve?
- Which TWO statements correctly describe the causes or implications of CRC errors, runts, giants, or output errors as see…
- You are connected to R1. Configure IPv4 and IPv6 addressing on R1's interfaces and verify reachability to R2. The curren…
- Which TWO statements accurately describe how AI/ML concepts are applied to network operations in modern enterprise netwo…
- Which TWO switch port configurations are required when connecting a Cisco IP phone and a desktop PC to a single access p…
Last reviewed: Jun 6, 2026
This 200-301 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 200-301 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.