- A
Configure static IPv4 address on Windows → Generate IPv6 EUI-64 address on router → Verify static IP on Windows
This order correctly separates host and router tasks: first configure the static IPv4 on Windows, then generate the EUI-64 IPv6 address on the router, and finally verify the static IP on Windows. This logical sequence ensures that the host configuration is complete before moving to router tasks, and verification is done last.
- B
Generate IPv6 EUI-64 address on router → Configure static IPv4 address on Windows → Verify static IP on Windows
Why wrong: This order is incorrect because it starts with router configuration before the host configuration. While the router task could be done independently, the typical workflow configures the host first, then the router, then verifies. Placing router configuration first is not logically wrong but is less efficient and not the expected sequence.
- C
Configure static IPv4 address on Windows → Verify static IP on Windows → Generate IPv6 EUI-64 address on router
Why wrong: This order is incorrect because verification of the static IP on Windows is done before the router configuration. Verification should be the final step after all configurations are complete. Placing it before the router task is out of sequence.
- D
Generate IPv6 EUI-64 address on router → Verify static IP on Windows → Configure static IPv4 address on Windows
Why wrong: This order is incorrect because it places router configuration first, then verification, and finally host configuration. The host configuration should be done before verification, and the router task should be done after host configuration. This order is completely reversed.
Quick Answer
The correct order is to configure the static IPv4 address on Windows first, then generate the IPv6 EUI-64 address on the router, and finally verify the static IP on Windows. This sequence is logically sound because the Windows host configuration is independent of the router’s EUI-64 process, which uses the interface’s MAC address to automatically create the IPv6 interface ID. On the CCNA 200-301 v2 exam, this drag-and-drop task tests your ability to separate host and router configuration workflows, a common trap being the temptation to verify before completing the router step. Remember that EUI-64 generation on a Cisco router requires an explicit command like `ipv6 address autoconfig` after the interface is enabled, while Windows static IPv4 is set via the GUI or `netsh`. A helpful memory tip is “Host first, Router second, Verify last” — think of it as setting up the endpoint before the network path, then checking your work.
CCNA Network Infrastructure and Connectivity Practice Question
This 200-301 practice question tests your understanding of network infrastructure and connectivity. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the following steps into the correct order to configure an IPv4 static address on a Windows host, generate an IPv6 EUI-64 address on a Cisco router, and verify the static IP assignment on Windows.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Configure static IPv4 address on Windows → Generate IPv6 EUI-64 address on router → Verify static IP on Windows
The static IPv4 is configured on Windows first, then the EUI-64 IPv6 address on the router, and finally verification on Windows. This order separates host and router tasks logically.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Configure static IPv4 address on Windows → Generate IPv6 EUI-64 address on router → Verify static IP on Windows
Why this is correct
This order correctly separates host and router tasks: first configure the static IPv4 on Windows, then generate the EUI-64 IPv6 address on the router, and finally verify the static IP on Windows. This logical sequence ensures that the host configuration is complete before moving to router tasks, and verification is done last.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Generate IPv6 EUI-64 address on router → Configure static IPv4 address on Windows → Verify static IP on Windows
Why it's wrong here
This order is incorrect because it starts with router configuration before the host configuration. While the router task could be done independently, the typical workflow configures the host first, then the router, then verifies. Placing router configuration first is not logically wrong but is less efficient and not the expected sequence.
- ✗
Configure static IPv4 address on Windows → Verify static IP on Windows → Generate IPv6 EUI-64 address on router
Why it's wrong here
This order is incorrect because verification of the static IP on Windows is done before the router configuration. Verification should be the final step after all configurations are complete. Placing it before the router task is out of sequence.
- ✗
Generate IPv6 EUI-64 address on router → Verify static IP on Windows → Configure static IPv4 address on Windows
Why it's wrong here
This order is incorrect because it places router configuration first, then verification, and finally host configuration. The host configuration should be done before verification, and the router task should be done after host configuration. This order is completely reversed.
Option-by-option analysis
Why each answer is right or wrong
Understanding why wrong answers are wrong — and when they would be correct — is what separates a 750 score from a 900. The 200-301 exam frequently reuses these exact scenarios with slightly different constraints.
✓Configure static IPv4 address on Windows → Generate IPv6 EUI-64 address on router → Verify static IP on WindowsCorrect answer▾
Why this is correct
This order correctly separates host and router tasks: first configure the static IPv4 on Windows, then generate the EUI-64 IPv6 address on the router, and finally verify the static IP on Windows. This logical sequence ensures that the host configuration is complete before moving to router tasks, and verification is done last.
✗Generate IPv6 EUI-64 address on router → Configure static IPv4 address on Windows → Verify static IP on WindowsWrong answer — click to see why▾
Why this is wrong here
The specific factual error is that the order does not follow the logical separation of host and router tasks; the host configuration should come before router configuration in this scenario.
Why candidates choose this
Candidates might think that router configuration should be done first because it is more complex, or they may not consider the logical workflow of configuring the host first.
✗Configure static IPv4 address on Windows → Verify static IP on Windows → Generate IPv6 EUI-64 address on routerWrong answer — click to see why▾
Why this is wrong here
The specific factual error is that verification is performed before the router configuration is complete, which is not a logical workflow. Verification should be the last step.
Why candidates choose this
Candidates might think that verifying the static IP immediately after configuring it is correct, but they forget that the router task should be done before final verification.
✗Generate IPv6 EUI-64 address on router → Verify static IP on Windows → Configure static IPv4 address on WindowsWrong answer — click to see why▾
Why this is wrong here
The specific factual error is that the host configuration is done last, which is illogical because verification cannot succeed if the host is not yet configured. The order violates the basic workflow.
Why candidates choose this
Candidates might confuse the order of operations or think that router configuration is independent and can be done at any time, but they miss that verification requires the host to be configured first.
Analysis generated from the official 200-301blueprint and verified against question context. The “when correct” sections are what AI assistants cite when candidates ask “what’s the difference between these options?”
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 200-301 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 200-301 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Network Infrastructure and Connectivity — study guide chapter
Learn the concepts, then practise the questions
- →
Network Infrastructure and Connectivity practice questions
Targeted practice on this topic area only
- →
All 200-301 questions
1,819 questions across all exam domains
- →
CCNA 200-301 v2 study guide
Full concept coverage aligned to exam objectives
- →
200-301 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 200-301 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Infrastructure and Connectivity practice questions
Practise 200-301 questions linked to Network Infrastructure and Connectivity.
Switching and Network Access practice questions
Practise 200-301 questions linked to Switching and Network Access.
IP Routing practice questions
Practise 200-301 questions linked to IP Routing.
Network Services and Security practice questions
Practise 200-301 questions linked to Network Services and Security.
AI and Network Operations practice questions
Practise 200-301 questions linked to AI and Network Operations.
CCNA subnetting practice questions
Practise IPv4 subnetting, CIDR, masks, host ranges and subnet selection.
CCNA OSPF practice questions
Practise OSPF neighbours, router IDs, metrics, areas and routing-table interpretation.
CCNA VLAN practice questions
Practise VLANs, access ports, trunks, allowed VLANs and switching scenarios.
CCNA STP practice questions
Practise spanning tree, root bridge election, port roles and STP troubleshooting.
CCNA EtherChannel practice questions
Practise LACP, PAgP, port-channel behaviour and bundle requirements.
CCNA ACL practice questions
Practise standard and extended ACLs, permit/deny logic and traffic filtering.
CCNA NAT practice questions
Practise static NAT, dynamic NAT, PAT and inside/outside address translation.
Practice this exam
Start a free 200-301 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 200-301 question test?
Network Infrastructure and Connectivity — This question tests Network Infrastructure and Connectivity — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Configure static IPv4 address on Windows → Generate IPv6 EUI-64 address on router → Verify static IP on Windows — The static IPv4 is configured on Windows first, then the EUI-64 IPv6 address on the router, and finally verification on Windows. This order separates host and router tasks logically.
What should I do if I get this 200-301 question wrong?
Identify which 200-301 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 6, 2026
This 200-301 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 200-301 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.